Fabricante:
(Categoria: 209)
Centrifugal fan, dust extractor fan, fan, extractor, dust fan-The fan comes: from a chip filter system-Motor: Siemens type 1L4 207-6AA60-Z 200L-Motor power: 22 kW-Speed: 975 rpm-without: housing-Impeller outer diameter: 960 mm-wing height: mm-Dimensions: 1425/1115/H1390 mm-Weight: 412 kg ... mais informação
working width: 1250 mmmaximum length of workpieces 3500 mmfeed speed 2.4 - 7.5 m / minfinishing line consisting of the following elements:- infeed conveyor- brush sander with 4 transversal brusches- brush sander with 2 longitudinal brushes- dust removal with brush and blowers- Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain- 3 lacquer pumps GRACO 015.085- 7 pumps for color stain GRACO Husky 515- intermediate conveyor- cross transport with rods and overhead hot air dryer- intermediate conveyor- drying tunnel with IR lamps- UV dryer with 2 lamps- outfeed conveyor
Single-shaft chipper with rotor width of 122 cm Rotor diameter 500 mm 37 kw motor hydraulic gate valve New rotor bearings ... mais informação
Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass ... mais informação
Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003
Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.
Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004 ... mais informação
Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004 ... mais informação
turning speeds: 90 U/minfunnel opening L-W: 800 x 1.200 mm: 1,1 m³rotor dia: 354 mm: 40 mmDust suction hood: 200 mmDimensions (L/W/H): 2.650 x 1.740 x 1.730 mmweight: ca. 2 ttotal power requirement: 37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device ... mais informação
Description: • Centrifugal extraction fan • Serial number 548-03 • Motor power 14.72 KW-1500 rpm • Fan diameter approx. 800 mm • Input pipe diameter approx. 500 mm • Output pipe diameter approx. 450 mmApprox. Onsite Dimension. (l x w x h): 1,300 x 1,020 x 1,830 mm, weight approx.: 400 kg ... mais informação
Description: • Centrifugal extraction fan • Serial number 362 • Motor power 7.36 KW-1500 rpm • Fan diameter approx. 700 mm • Input pipe diameter approx. 400 mm • Output pipe diameter approx. 350 mm • Dimensions for transport 1200 x 950 x 1600 mmApprox. Onsite Dimension. (l x w x h): 1,140 x 950 x 1,460 mm, weight approx.: 300 kg
ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)
Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004 ... mais informação
Hurricane Pulse Filter Model JSS-4 33-300 Capacity 37,500 m³/h Filter area 300 m² 180 pcs filter bags Dimension filter bags 160 x 3300 mm Air-conditioned control cabinet as good as new year 2012 incl. all return air ducts incl. centrifugal fan HF 2/500 – R, 30 kW with 15,700 m³/h incl. centrifugal fan HF 2/550 – R, 30 kW with 19,300 m³/h incl. 1 pcs spare motor 30 kW incl. a complete set of new replacement filter bags incl. 3 Gottwald tubular screws from rotary valve to silo, 1 x 3500 x 194 mm 0.55 kW, 2 x 6,000 or 9,000 x 219 mm 1.1 or 1.5 kW Dismantling can be organized Subject to errors, changes and prior sale
Description: ZUANI milling cutter with D=40mm hole, complete with wooden box, spare knife set, wrenches and profile drawingApprox. Onsite Dimension. (l x w x h): 200 x 200 x 120 mm, weight approx.: 5 kg ... mais informação
Used nail box (loose nails) for pallet making machine; Tilting function for loose nails for separation into the nailing machine (feed) to the nail guns; pallet production; Functional, functional. Not cleaned, not refurbished. Dimensions: 580x810mm Total width: 760mm Total height: 710 mm Shipping by freight forwarder possible
Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...
Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004