Fabricante:
(Categoria: 104)
Grinding length: 600mm, grinding width: 375mm, workpiece height: 375mm, magnetic table dimensions X/Y: 600mm/400mm, grinding wheel dimensions: 300mm/50mm, max. table speed: 30m/min, grinding wheel speed: 1450rpm, weight: approx. 3500kg, dimensions X/Y/Z: 2800mm/2500mm&2500mm. Guideway run-in, no oil pockets, magnet failure X and Y axes 0.01mm and 0.02mm respectively. Machine in good working order. Documentation available.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M3 EW20° 4GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M3,5 EW17,5° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M3 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mdigital read outouter and internal grinding devicetail stockcoolant deviceTechnische Daten / technical details:Spitzenhöhe / center height 175 mmSpitzenweite / center to center 1000 mmSchleiflänge / grinding lenght 1000 mmSchleifscheibenmaß links / grinding wheel dimension left 400x50x127 mmmax. Drehzahl Werkstückspindelstock / max. speed of workpiece spindle 6-600 UpM /rpmDrehzahl Schleifspindel / spindle speed 1500/1700/2100 UpM /rpmGewicht der Maschine / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solu ...
CONTROLS digital read out HEIDENHAIN WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 349 mmWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 250 mm grinding length: 1000 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4000 mm space requirements -front/back-: 2000 mm total height: 1500 mm total weight approx.: 2500 kgATTACHMENTS (GRINDING) Flange of grinding wheel: yes coolant unit: yes Equipment:- Grinding wheels and flanges (sold without frame)- U machine but no internal grinding spindle available i.e. internal grinding spindle not included
WORKING RANGE SURFACE GRINDING grinding length: 400 mm grinding width: 163 mm vertical travel: 200 mmTABLE (SURFACE GRINDING) magnetic table: optional MAGNETIC TABLE length: 350 mm width: 150 mm height: 50 mmSPINDLESTOCK GRINDING SPINDLE X-axis travel: 483 mm Y-axis travel: 171 mm Z-axis travel: 179 mm spindle revolutions (max): 2800 /minGRINDING TOOL type of grinding tool: wheel diameter (max): 178 mm borehole: diameter: 32 mm width: 13 mmELECTRICAL SPECIFICATIONS total power consumption: 1.5 kW mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1650 mm space requirements -front/back-: 825 mm height above floor le ...
CONTROLS PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 290 mm automatic feed with belt conveyor: yes number of brushing station: 2 demagnetizer: yes BRUSHING UNIT number of brushes: 5 drive power: 4 kWELECTRICAL SPECIFICATIONS total power consumption: 8 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3250 mm space requirements -front/back-: 1040 mm total height: 2500 mm total weight approx.: 2750 kgWorkpiece width: max. 290 mmWorkpiece height: max. 180 mmHeight adjustment: 200 mmTools per unit: 5Tool diameter: 150 mmPitch circle diameter: 280 mmHousing speed: max. 260 /minSpindle speed: max. 3000 /min
CONTROLS CNC controls SIEMENS 840 D SL TECHNISCHE DATEN .. max.: 18000 /min .. to: 30000 m/min .. to: 30000 m/minWORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 630 mm Y-axis travel: 465 mm Z-axis travel: 630 mm rotating range C-axis from: 70 ° rotating range C-axis up to: -250 °ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzX,Y,Z linear axes CU GentryA Rotation axis SK50 n=1000 1/minC axis = -70 +250Operating hours 21`700 hEquipment:- CNC software V04.07+SP 04- PLC basic program: 04.07.23- Workpiece - Renishaw MP250 probe- Tool - Renishaw LP2 probe- Dittel balancing system P6001- Dittel structure-borne sound system DM6000- Haas-CU, including automation- Haas robot cell CU- Siemens 840 ...
CONTROLS conventional TECHNICAL SPECIFICATION table diameter: 800 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 8500 kgRound table - diam. 800mmmax. workpiece swing diameter approx. 1,200 mmDistance from table center to grinding stand 1,150 mmmax. workpiece weight approx. 650 kgTable stroke horizontally approx. 650 mmTable speeds hydr.-stfl. right/left 4-100 rpmTable infeed (internal/external grinding) 0.025 - 0.025 mm/strokeTable oscillation (stroke) 0.2 - 3,000 mm/minTable holding time when changing the stroke 0-10 seconds.
CONTROLS digital read out MITUTOYO WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 320 mm workpiece weight between centers (max): 150 kgWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 280 mm grinding length: 1000 mmWORKPIECE SPINDLESTOCK spindle revolutions (min): 100 /min spindle revolutions (max): 500 /minTAILSTOCK distance betw. centers (max): 1000 mmGRINDING TOOL type of grinding tool: wheel diameter (max): 355 mm borehole: diameter: 127 mm width: 55 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzATTACHMENTS (GRINDING) coolant unit: yes
CONTROLS digital read out WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 200 mm workpiece weight between centers (max): 400 kg workpiece weight flying (max): 20 kgWORKPIECE SPINDLESTOCK spindle revolutions (min): 80 /min spindle revolutions (max): 800 /min tool fixture: MK 4 TAILSTOCK distance betw. centers (max): 400 mm sleeve stroke: 20 mm taper: MK 2 SPINDLESTOCK GRINDING SPINDLE spindle revolutions (min): 1600 /min spindle revolutions (max): 2200 /min drive power: 3 kWGRINDING TOOL diameter (max): 350 mm borehole: diameter: 127 mm width: 30 mm
CONTROLS conventional WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 450 mm workpiece weight between centers (max): 200 kg workpiece weight flying (max): 50 kgWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 290 mm grinding length: 966 mmTABLE -CYLINDRICAL GRINDING- tilting range (B-direction) min: 6 ° rotating range B-axis up to: 9 °WORKPIECE SPINDLESTOCK spindle revolutions (min): 32 /min spindle revolutions (max): 500 /min drive power: 0.7 kW spindle bore diameter: 24 mm tool fixture: MK 4 TAILSTOCK distance betw. centers (max): 1120 mm sleeve stroke: 40 mm taper: MK 4 SPINDLESTOCK GRINDING SPINDLE X-axis travel: 140 mm drive power: 5.5 kWGRINDING TOOL   ...
CONTROLS NC controls UNIPORT 3 WORKING RANGE SURFACE GRINDING grinding length: 2200 mm grinding width: 350 mm workpiece height (max) with largest wheel: 300 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 2200 mm table surface (front-back): 350 mm magnetic table: yes MAGNETIC TABLE length: 2150 mm width: 345 mmSPINDLESTOCK GRINDING SPINDLE spindle revolutions (max): 4000 /min drive power: 30 kWGRINDING TOOL type of grinding tool: wheel including accessories such as- various grinding wheels- disk dressing device
CONTROLS CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING grinding length: 880 mm grinding width: 510 mmTABLE (SURFACE GRINDING) table surface (left-right): 800 mm table surface (front-back): 430 mm workpiece load (max): 800 kgMAGNETIC TABLE length: 800 mm width: 400 mmSPINDLESTOCK GRINDING SPINDLE spindle revolutions (min): 1500 /min spindle revolutions (max): 3500 /minGRINDING TOOL type of grinding tool: wheel diameter (min): 210 mm diameter (max): 400 mm borehole: diameter: 127 mm width: 100 mmELECTRICAL SPECIFICATIONS mains power supply: 30 kVADIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2350 mm total weight approx. ...
CONTROLS CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING grinding length: 1260 mm grinding width: 505 mmTABLE (SURFACE GRINDING) table surface (left-right): 1250 mm table surface (front-back): 500 mmGRINDING TOOL type of grinding tool: wheel diameter (max): 400 mm borehole: diameter: 127 mm width: 100 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4690 mm space requirements -front/back-: 2670 mm total height: 2850 mmhydrostatic guidesvery preciseincluding roller diamond deviceIncluded:- various flanges- Exhaust air filter
CONTROLS CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 180 mm material thickness - plunge cut grinding: 30 mmCOMPONENT-FEEDER Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS total power consumption: 95 kWScope of delivery:- Machine- div. flanges and used grinding wheels- Measuring control IONIC 17AOptional:- 270 pcs. grinding segments 22A 100 S 6 B20- 289 pieces grinding segments 14C 80 L 10 B30Machine is dismantled and stored
CONTROLS CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 350 mm workpiece weight between centers (max): 80 kgWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 350 mm grinding length: 500 mmWORKPIECE SPINDLESTOCK spindle revolutions (max): 1500 /min drive power: 3 kW spindle bore diameter: 30 mm tool fixture: MK 5 c-axis: yes - positioning/indexing: 0.5 °TAILSTOCK distance betw. centers (max): 400 mm sleeve stroke: 60 mm taper: MK 4 SPINDLESTOCK GRINDING SPINDLE X-axis travel: 370 mm Z-axis travel: 500 mm tilting range (B-direction) min: 60 ° drive power: 9 kWGRINDING TOOL diameter (max): 500 mm borehole: diameter: 203. ...
CONTROLS CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 457 mm grinding width max. - throughfeed grinding: 80 mm material thickness max. - throughfeed grindin: 20 mm grinding width max. - plunge cut grinding: 205 mm material thickness - plunge cut grinding: 80 mmGRINDING SPINDLE 1 drive power: 23 kWGRINDING SPINDLE 2 drive power: 23 kWCOMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 240 mm/min feeder velocity min.: 20 mm/minScope of delivery:- Machine- emulsion tank new in 2012Measuring control IONIC 17A
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 300 mm material thickness - plunge cut grinding: 80 mmGRINDING SPINDLE 1 drive power: 48 kWGRINDING SPINDLE 2 drive power: 48 kWCOMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 20 mm/min feeder velocity min.: 240 mm/minDIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 5000 mm total height: 3100 mm total weight approx.: 13000 kgwith inline measuring system DISKUS IONIC 17AEmulsion treatment system HÜTTNER F6-157 ...