subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 1200)
Used beater 0,12 KW with gear motor Bauer 27 rpm and aluminum propeller stirrer 300 mm = 1350 RPM gear motor: Gearmotor Bauer, 3 x 230/400 v 0.12 kW, n1, n2 = 27 U/min., 24.5 NM, IP 54 weight approx. 8 kg = M2. With brake. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, material 1.4301 stainless steel. With rigid coupling made of aluminium. Stirrer: Double propeller stirrer, diameter 300 mm, material aluminium very slow running, torque mixer for use in attaching containers or kettles. Also can be used to prevent cavities in powder silos (bridging). With traverse for IBC containers or other containers for extra charge. Caution: Not suitable for aggressive media. 3 pieces in stock.
Agitator 0,12 KW with gear motor North i 1:20 and Propellerrührer 150 mm = With beam in aluminium profiles 45 45 mm. Gear motor: i 20 = Flender gear motor, 3 x 230/400 v 0.12 kW, n2 = 67 U/min., M2 = 17 nm, weight approx. 10 kg. Shaft: precision stainless steel shaft D16, length 500 mm, diameter 16 mm, material stainless steel Stirrer: three flight liger propeller stirrer, diameter 150 mm, material stainless steel 1.4581
Used agitator 3.0 KW with long stirring shaft 1700 mm With beam in aluminium profiles 45 45 mm. Electric motor: Siemens 3.0 KW, 3 x 230/400 volts, 1420 RPM., IP55. Weight approx. 35 kg. Shaft: precision stainless steel shaft D28, length 1700 mm, diameter 28/30 mm Material stainless steel 1.4301. With 2 rigid couplings stainless steel 1.4301. Stirrer: Prismatic blade, length 300 mm, material 1.4301 stainless steel / polyamide.
IBC container agitator 0.75 KW with worm gear motor i = 1 : 10 and inclined blade stirrer 244 mm With truss made of aluminum profiles 45 45 mm. Propulsion: worm gear motor, 3 x 230/400 volts, 2800 rpm, 0.75 kW, IP55, n²=280, Weight approx. 25 kg. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301 Coupling: Rigid coupling made of stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571 Sash adjustable angle
Double Z-Kneader / Sigma Kneader / Bucket Kneader / Trough Kneader Topos - Made by Topos, built approx. 1960 - Refurbished in 2018 - Electric motor VEM 4 / 6 KW pole-switchable, for 2 speeds 1445 / 720 rpm, 11/12 A -Belt - 2 Z-shafts - All parts that come into contact with the product are made of stainless steel - Single-walled container approx. 700 x 760 x 500 mm = approx. 250 litres - Usable volume approx. 150 litres - Floor emptying - Weight approx. 1200 kg - Overall dimensions approx. 1400 x 1500 x 1700 mm - Very stable design and very good condition
Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.
Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.
ERSA HOTFLOW - 7 Continuous Dryer / Tunnel Dryer / Belt Dryer Type: HOTFLOW – 7 Convection oven as tunnel dryer / belt dryer / continuous dryer for Drying of panel materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm The machine can be used as a soldering oven – soldering machine – reflow oven with little effort. ...
Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571
Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571
Used small continuous dryer For drying sheet materials. Width approx. 0.80 m, length approx. 1.60 m Dimensions: Width c. 1.10 m, length 1.75 m, height c. 1.70 m Heating with Leister hot air unit up to 160°C with uniform outlet on dry material through perforated plate. Can be moved on wheels. Swivel control box. For an additional cost spray bridge as shown.
AGITATOR REITZ RW055142244: 0.55 KW / 142 rpm. and inclined blade stirrer With traverse made of aluminum profiles 45 45 mm. Worm gear motor: 3 x 230/400 volts, 0.55 kW, IP55, n²=142 rpm, weight approx. 20 kg. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4571 Coupling: Rigid coupling, blank, material stainless steel 1.4571 Agitator: Two-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571, screwed version, blade adjustable in angle.
Automatic mug machine made by Netzsch. Manufactured in 1985. With two tops, my maximum yield was 1000 pcs/h. Last 25 years done Only 16 hours/week. Transmission chain renewed in 2022. Largest item about 0.5 liters. There is no handle automation. Released by agreement ... mais informação
Used thickening centrifuge Performance speed: 1600 rpm Drum diameter: 1114 mm Weight: 18,500 kg Rotodiff: Viscotherm 112 S full hydraulic Second-hand machine Not ready for operation (major overhaul extra charge!) ... mais informação
Used centrifuge Drive: 30 kW Hydraulic: Viscotherm VFD11 11.5Z Speed power: 3200 RPM Drum diameter: 530 mm Weight: approx. 6000 kg Accessories: as good as new, complete switching and control system, mud - and polymer pump, discharge screw, MID mud and polymer Second-hand machine, Semi-mobile (with base) ready for use
Used centrifuge Performance speed: 2200 rpm Drum diameter: 909 mm Drum material: G. 7382 Weight: 12,200 kg semi mobile (with base). not ready for operation (major overhaul extra charge!) ... mais informação
Used centrifuge Performance speed: 2200 rpm Drum diameter: 900 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg Maximum operating temperature: 50°C Maximum operating pressure: 1 bar not ready for operation (major overhaul extra charge!)
Used centrifuge Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg not ready for operation (major overhaul extra charge!) ... mais informação
Used centrifuge on mobile trailers 200 kW full hydraulic Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg ready to use,. Includes: Panel, polymer conditioning
Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)