A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.

 

Fabricante:
(Categoria: 1200)

ABB 8
ABEL 22
ABS 2
ADM 1
AEG 11
AMK 2
AMS 2
ANA 1
APV 6
ATR 2
Azo 62
B 1
BAV 1
BB 1
BBC 1
BC 1
BCD 1
BP 2
BSW 1
BTR 3
C 2
CM 1
CME 1
máquinas e equipamentos para engenharia de processo /
Máquina: DUECHTING MC 50-315 D Pumps
Número do item: 153818094
Ano de construção: 2014
novo

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

máquinas e equipamentos para engenharia de processo
Máquina: MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-10 加胶站
Número do item: 150201238
Ano de construção: 2015
usava
Preço: 10.715 €

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

máquinas e equipamentos para engenharia de processo / 烘干机
Máquina: BEKO TECHNOLOGIES EVERDRY 烘干机
Número do item: 164200149
Ano de construção: 2012
usava

EVERDRY Absorber for Compressed Air DN600 x 1700  ... mais informação

máquinas e equipamentos para engenharia de processo / 开关
Máquina: ELECTRIC SWITCH AND SOCKE Electric switch AND production Switches
Número do item: 148282973
Ano de construção: 2004
usava
Preço: 180.000 €

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND I ...

máquinas e equipamentos para engenharia de processo
Máquina: MARTIN TG50/50  0-50V max 50A 腐蚀保护直肠器
Número do item: 119626070
usava
Preço: 250 €

Corrosion protection rectirichtere REctimen Rectiveranel Manufacturer Martin, Velbert Type TG 50/50 Mains 220V 50HZ 15.6A Output 0-50V max 50A Transformer according to VDE 0550 with hardened insulation Type ETOLstg. kVA 3.4 Prima220 V 15.6A Sekundaer 60V 56A Controller Preussler 22160/80.11 Display of the protective current 0-60A Special price

máquinas e equipamentos para engenharia de processo
Máquina: BLEFA GMBH 1000 Liter Gefahrklasse 3  6,1  b und c 用于有害物质的不锈钢罐 1.4301 3
Número do item: 119626192
Ano de construção: 1990
usava

1 pc. stainless steel tank with large inspection flap and 3 sampling points, staplerfaehig and stackable additional staplerfaehiger catcher in stainless steel (not pictured) Fasungsvermoegen 1,000 litres Operating pressure 0.1 bar For hazardous substances of class 3 6.1 b and Weight Tank 212 kg Collecting pan approx. 240kg Special price

máquinas e equipamentos para engenharia de processo / 滤器
Máquina: LUBRIZOL Abgasreinigung S9BB5 Diesel particulate filter cleaning system
Número do item: 144050388
usava

Exhaust filter diesel particulate filter cleaning system for free burning of clogged particulate filters. Consisting of heating element and control. Nh7p9 Connection 400 Volt Power 9,000Watt  ... mais informação

máquinas e equipamentos para engenharia de processo /
Máquina: FLUX FDMX 12 PP/M1 泵
Número do item: 164195775
usava

Air Operated Diaphragm Pump by Flux Model : FDMX/M1 No.3656  ... mais informação

máquinas e equipamentos para engenharia de processo / 滤器
Máquina: APV Ultrafiltration 20.000 l/h 滤器
Número do item: 164188406
Ano de construção: 1994
usava

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3. T-CUT Core UF 200-125 075-3658 x 80 pcs. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

máquinas e equipamentos para engenharia de processo
Máquina: DONALDSON Acucut C-24 精细筛分机系统
Número do item: 123801095
usava

Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.

máquinas e equipamentos para engenharia de processo
Máquina: DONALDSON Acucut C-24 超细分离线
Número do item: 123801103
usava

Ultra fine classifying line for end finenesses up to 3 micron, consisting of: Feeding unit, Acucut Mikro air classifier C-24, dust filter Bühler PGFG 60/18 (39 m² filtering surface, shock pressure proof, without blower), several tubes and switchgear cabinet. Prior use: Toner production (capacity: 200 - 600 kg/h). Line revised in 1993, regularly maintained.

máquinas e equipamentos para engenharia de processo / 混合设备
Máquina: RUBERG HM 200 Mixers
Número do item: 8776462
usava

Type: HM 200, built: 1987, 6,5 / 9,5kW, partially in stainless steel, 2 agitators, with control panel, completely on base frame, pole changing drives. ... mais informação

máquinas e equipamentos para engenharia de processo
Máquina: DR. BOEKELS EMS 211 A 金属探测器
Número do item: 8776466
usava

Metal detector with exploring coil EQA 65 x 15, No. 6.30.8941.30. Evaluation unit EMS 21.1 and exploring coil detect foreign metallic objects in non-conductive materials. Detecting width: 650 mm, throughput height: 200 mm. Sensitivity is steplessly adjustable. With switchgear in a separate box. ... mais informação

máquinas e equipamentos para engenharia de processo / 振动筛
Máquina: DORST VS 45 Vibrating sieve
Número do item: 11405923
usava

Vibratory sieves with interchangeable screen coverings, screen surface: 450 mm x 300 mm, vibrator: 0.3 kW / 2,750 RPM, cast housing with oval opening. Last used as slicker sieving (wet sieving). Several identical siesies available  ... mais informação

máquinas e equipamentos para engenharia de processo / 混合设备
Máquina: FIVES FCB TSV 1000 HF Dynamic airflow sifter
Número do item: 7041651
Ano de construção: 2000
usava

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.  ... mais informação

máquinas e equipamentos para engenharia de processo / 工艺容器
Máquina: NETZSCH 262.01 Storage tank 150 l. with agitator in V2A
Número do item: 7041654
Ano de construção: 1988
usava

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.  ... mais informação

máquinas e equipamentos para engenharia de processo /
Máquina: LEWA EK 1 V Dosing pump
Número do item: 7041655
Ano de construção: 1992
usava

Piston pump with drive 0.25 kW / 1.325 RPM, stroke length: 1 - 15 mm, stroke frequency: up to 110 rpm.  ... mais informação

máquinas e equipamentos para engenharia de processo / 滤器
Máquina: KIEKENS DO 4031 Dust filter 15 m2
Número do item: 7041657
Ano de construção: 1999
usava

Pocket filter with 15 m2 filter area, cleaning via vibrating motor with 0.25 kW. Designed as a silo attachment or vent filter for overpressure silos, including many new parts. Can be retrofitted with exhaust fan (0.75 - 2.2 kW), stand feet and dust collection tank to stand filter / add-on filter.  ... mais informação

máquinas e equipamentos para engenharia de processo / 混合设备
Máquina: FIVES FCB TSV 1000 HF Dynamic Classifier
Número do item: 7041669
Ano de construção: 2000
usava

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.  ... mais informação

máquinas e equipamentos para engenharia de processo
Máquina: NETZSCH 262.01 罐体 150 l. 带不锈钢搅拌器
Número do item: 7041676
Ano de construção: 1988
usava

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.  ... mais informação