subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 201)
CNC cross-cut saw Paul Type 18 E Specifications - Incoming wood length (mm): 2300 - 3500 - Wood thickness (mm): 27 - Wood width (mm): 80 - 600 - Type of wood: oak, beech unedged, kiln-dried, rough-sawn - Shortest sections to be sawn (mm): 2250 - Cutting width (mm): 78 – 220 - Machine frame: made of sturdy welded construction with 20 mm load-bearing walls - Machine hood: with viewing window that can be folded up, soundproofing (sound level < 85 dB (A)) - Cutting height (mm): 180, with saw blade diameter 800 - Note: Machine without control cabinet, as it was integrated into a machine line
SECOND-HAND BORING AND END CUTTING MACHINE COMEC MOD. FIMOV 2500 2UT+2UF+CA2 - N. 2 tilting cutting units - N. 2 vertical boring units - Maxi working length 250 cm - With automatic loader - Perimetral safety net - S/N 021132 - CE (year 2002) ... mais informação
Longitudinal saw with max. 6.2 m cutting length Width adjustment up to max. 1.2 m with positioning control ... mais informação
Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h. ... mais informação
Remigia type trimmer for plywood. High working speed, low consumption, works perfectly and can be viewed at any time ... mais informação
The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and swiveling saw blade, digital display and scorer. In addition, the machine has pneumatic hold-down devices for convenient one-person operation., cutting height: tba, cutting length: 3.200 mm, cutting width: 1.300 mm, saw blade ø: 450 mm, engine: 5,5 kW, Vorritzer: 0,75 kW
cutting capacity - round: 300 mmdimensions of saw-band: 3320 x 27 x 0,9 mmcutting capacity - flat: 330 x 260 mmcutting capacity - square: 260 mmControl: evolution work height max.: 870 mm: 40 / 80 mt/minweight of the machine ca.: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roll diameter: 600 mm; Stand projection: 580mm; Cut depth: Swivel table: yes; Belt speed: Motor power: 2.2 kW; Engine brake: yes / automatic; Suction connection: 100 mm and 120 mm; Machine length: 1150 mm; Machine width: 850 mm; Machine height: 2100 mm; Weight: 200 kg; ... mais informação
Manufacturer: Scheer, Year: 2003, Program: yes, Type: PA 6000, Plattenformat max mm: 4200 x 3200, Working hight mm: 80, Length to slide in mm: 4200, Saw Blade Diameter mm: 350, Number of clamping tools: 7, Main engine kW: 9, Feeding speed max m/min: 70, Feeding speed continous adjustable: yes, Scoring Aggregate : yes, Compressed air bar: 6, Year :2003
Description: Serial number: 63380, 400 V, 3 phases, 50 Hz, on metal base frame, saw blade diameter approx.: 40 cm, work table dimensions approx.: 50 x 50 cm, working height approx.: 97 cm, total machine dimensions approx.: 90 x 80 x 180 cm, with various holding devices, 1 chip tray, extendableApprox. Onsite Dimension. (l x w x h): 900 x 800 x 1,800 mm, weight approx.: 50 kg
CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003
Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm
I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003
Saw blade diameter: 300mm, panel format: 1200mm/1200mm, dimensions X/Y/Z: 4300mm/2700mm/1900mm, weight: approx. 2000kg. Including extraction system (3000m³/h) and big-bag bagging system. ... mais informação
SECOND- HAND SPINDLE MOULDER SCM MOD. T130NPS - CE RULES - with inverter - sn AB/155496 - year 2003 ... mais informação
Jusan shear for cutting uncoiled wood. Includes drive belt for the sheet and two 80% blades. It works perfectly and can be viewed at any time. ... mais informação
cutting diameter: 320 mmsaw band length: 4150x1,1 mmcutting width: 600 mmtotal power requirement: kWweight of the machine ca.: 0,44 tdimensions of the machine ca.: mFully automatic band saw roller conveyor Dimensions: 4000x700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic panel sizing beam saw with rear lifting tableMax panelsizes when rear loading: 5600mm x 2240mmMax. cutting length x width: 5600 x 5600 mm.Max. stack weight for the lift: 10 tonmax stack height 580 mmSaw blade outstand: 125mmMain cutting motor 13,5 kWSawblade diameter 450 mm.Scoring saw motor 2,2 kWFeed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/minSpeed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm.5 air flotation tables in the front 2810 x 650 mmControlls: CAD-matic 4.0