desbastadoras usadas para venda

Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg

max. ram stroke: 230 mmthroat: 230 mmtable diameter: 0 mmare offered :2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 12501x overhauled new1x has to be overhauled.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

SCM P64 four-sided planer Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Mountain 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table with a length of 2300mm Machine dimensions: 3300x1200x1600mm

Number of spindles: 6 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6 bis 24 m/min.Dimensions (L/W/H): 4800x1900x2150 mmweight of the machine ca.: 5400 kgControl: powerControl HOMAG Moldteq M-300 (OPTIMAT LPP-306)--------------------------------------Four-sided planer in window versionwith electronic axial and radial adjustment of the spindles.Advantages:--------------------------------------- Flexibility thanks to variable feed and adjustable spindle speed- Intuitive machine operation via powerTouch2- Quick setup using proLock spindle clamping- High precision thanks to solid cast iron stand- Ideal power transmission as each spindle has its own motoris drivenTechnical data short version--------------------------------------Number of spindles: 6Working width: 250 mmWorking height: 160 mmDressing table length: 2500 mmSpindle s ...

Planing and molding machine Weinig Unimat 23E for four-sided planing and profiling of wood with groove bed for short and curved workpieces as well as mobile spindle and long dressing table., working width: 230 mm, working height: 160 mm, spindles: 6, spindle 1: Bottom / 5.5 kW / 50 mm, spindle 2: Right / 11 kW / 50 mm, spindle 3: Left / 11 kW / 50 mm, spindle 4: Top / 5.5 kW / 50 mm, spindle 5: Top / 5.5 kW / 50 mm, spindle 6: Bottom / 5.5 kW / 50 mm, Dressing table length: 2.500 mm, feed: 5,5 kW, feed: 5,5 kW, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, table rollers: Driven table roller in the outlet, Short parts package: Yes, groove bed: Yes, Slot bed milling cutter: Included, Control: Mobile spindle, Axial stroke vertical spindles: 80 mm, Axial stroke horizontal spindles: 45 mm, short parts package: Yes, control: mobile spindle

Working width: 510 mmLength of the planing table: 2.250 mmNumber of knives: 4 St.Motor output: 5,5 kWDimensions (L/W/H): 2.427 x 1.340 x 890 mm: Ja weight: 750 kgDust suction hood: 140 mm: Keilleistenmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave  ... mais informação

SPECIFICATIONS: Max. working width mm: 500 Table length mm: 2600 Number of knives: 4 Installed capacity: KW 5.0  ... mais informação

Four-sided planer Weinig Profimat 22N Working width 220mm Working height 120 mm Number of spindles: 6 Spindle system Bottom 4kw Rights 5.5kw Left Mount 5.5kw Bottom 4kw Universal 4kw Spindle diameter 40mm Spindles adjustable in two planes Feed speed adjustable on variator 6-22m/min  ... mais informação

Four-sided planer Weinig Profimat 26 Super Working width 260mm Working height 160m Number of spindles: 5 Spindle system Bottom 7.5kw Rights 7.5kw Left Mount 7.5kw Bottom 4kw Pneumatic clamps Feed speed adjustable on variator 5-24m/min Eclectic height and working width adjustment Entrance table length 2000mm CE Certified

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pr ...

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NO. 6903 TECHNICAL DATA - max width of the processed element 230mm - max height of the processed element 160mm - number of spindles 5: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm, electrically adjustable right/left 7.5kW 4) horizontal top 230mm, electrically adjustable up/down 11kW 5) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm in advance: - 6 pulling and toothed input rollers, including 2 double rollers 2 pulling, rubber, double output rollers from down: - toothed pulling, metal, swivel input shaft - smooth metal pulling roller - side pressure - pneumatically adjustable rollers - length of the introductory tabletop 1980mm - central lubrication - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - feed on cardan shafts - feed m ...

CATALOG NO. 7165 TECHNICAL DATA - max width of the processed element 180mm - max height of the processed element 120mm 4 spindles: 1) horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure at the insertion - 6 introducing, pulling and toothed rollers, including 2 double ones - double output, pulling, rubber roller from above - at the bottom, an introducing, pulling, toothed, wide, metal roller - a pulling, metal, smooth roller from the bottom - 2.2kW feed motor - feed on cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - central lubrication of the countertop - length of the introductory tabletop 1580mm - diameter of the exhaust pipe 4x120mm - dimensions length/width/h ...

CATALOG NO. 6873 TECHNICAL DATA - max width of the processed element 240mm - max height of the processed element 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 pulling and toothed input rollers from above - 2 output, pulling, rubber, smooth rollers from above - from the bottom, a toothed input roller, pulling and turning in the tabletop in front of the first spindle - 2 pulling rollers from the bottom, metal, smooth - 4 side pressures from the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth adjustment of the feed speed on the inverter 6-30m/min - 3kW feed motor - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication o ...

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...