outras máquinas para trabalhar madeira usadas para venda

Combined woodworking machine Felder CF 731/03 with extraction device Felder AF 22 Circular saw, milling/moulding machine, dressing thickness planing machine Masch. Ref. 422.09.454.05 Planing width 310 mm 1 metre cut-to-length stop 1.3 m telescopic cut-to-length stop up to approx. 2 m or a little more Boom table and stop jaws are included Extraction unit Felder AF 22 mobile The machines are stored at ground level, forklift trucks for loading are available. Year of manufacture 2005 The machines are in very good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...

Manufacturer: 2 Stück Abluftventilatoren, Type: waren verbaut Sritzmaschine, Year: ca.2005, Diameter intake mm: 400, Engine power kW: 2,5/1720 , rotations rpm: 1720, Direkt drive: yes, Suction side mm: 400, Outlet side mm: 400 X 1000, Year :ca.2005 ... mais informação

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Motorised height-adjustmentSound enclosure over all trimming motorsEquipment:Coil and strip magazineHot melt unit Pressure zone End trims, chamfer and straight, automatic adjustmentTop/bottom rough trimmingTop/bottom fine trimming, tilting, Contour trimming unitScraping unitBuffing unitreturn conveyor Ligmatech ZHR 05

Description: Vacuum extraction 21,000 m3/hour incl. control, -pressure air cleaning, -transport screw, -transport fan and return air duct with branded damper and summer/winter damper Brand: Holtrop Jansma - AFS Type: OSFS 185 Year of construction: 2005 Vacuum extraction Diameter suction opening: ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (base 2,700 mm + top 2,700 mm + 800 mm fans) Capacity: 21,000 m3/hour Power: (2x) 15 kW, 380V, 56 Amp, 10,500 m3/h, 3,000 rpm, 3,850 Pa, type: RL E 550x130 Filter surface area: 185 m2 Number of filter hoses: 150 Length filter hoses: 2,200 mm Diameter filter hoses: 180 mm Filter cleaning Compressed air cleaning Dry riser connection Conveyor auger: HJ STH-380, 12 rpm Rotary sluice: HJ ZRS-300, 31 rpm Drop hole dimensions: 250x350 mm Conveyor fan: Suction pipe diameter: ø250 mm Capacity: 4,000 m3/hour Motor: 5.5 kW Speed: 2,900 rpm Conveyo ...

SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005

Manufacturer: Silo, Year: 2006, Capacity m³: ca. 250, Length mm x width mm x height mm: 7800x6582, Year :2006 ... mais informação

Description:  ,1 bag extraction system ,with wheels Outlet diameter: ,120 mm Single-phase main motor: 1.2 kW, Approx. Onsite Dimension. (l x w x h): 900 x 500 x 1,300 mm, weight approx.: 15 kg ... mais informação

Lambion Boiler Auto. Cleaning Auto. Ash discharge Storage container for loading Flue gas cyclone filter Exhaust chimney Facility is in very good condition has always been maintained Year of construction 2006 Nominal power 845 KW Rated capacity 950 KW Temperature max 100 °C Pressure max 3.5 bar

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower-Manufacturer: Airheat, centrifugal fan with soundproof housing-Type: RDH-500-11.0-Volume flow: 20000 m3 / h-Motor: Hoyer 15 kW 1460 rpm-Dimensions: see techn. Drawing with the photos-Dimensions: 1800/1110 / H2900 mm-Weight: 584 kg ... mais informação

SCM-MINIMAX Universal Combi Model CU410 CLASSIC Specifications: - Useful working width of flush tables 410 mm - total length of the wire plates mm 1800 - Tilting wire guide degrees 90-45 - top dimensions thickness 410x605 mm - feed speed at thickness m/min 7 - min/max working height at thickness 3/230 mm - Dimensions of the spindle moulder table mm 1100x339 - Saw blade inclination 90-45 degrees - max. diam. Saw blade mm 315 - max. protrusion of the saw blade from the table at 90° mm 100 - max. protrusion of the saw blade from the table at 45° mm 80 - max. squaring capacity (basic machine) mm 1465 - cutting width at rip fence 820 mm - Useful spindle length 125 mm - Spindle rotation speed rpm 1400-3500-6000-8000 - max. spindle moulder diameter under the table 210 mm - max. tenoning tool diameter 275 mm - Motor power (n. 3 motors) HP 4 kw 3 Hz 50 Standard equipment - ...

Thin-cutting frame saw ORBIT Plus . The ORBIT Plus thin-cutting frame saw uses a new method of up/down movement of the saw frame for slat production. During the downstroke of the saw frame, the cutting process is absolutely straight. At the lower end of the stroke, the saw frame swings out of the cutting process in the direction of the wood feed. As soon as the saw frame has swung out of the cutting process, the upward stroke begins, whereby the saw frame remains swung out to the upper end of the stroke and does not come into contact with the wood. Use: parquet and technical floors, doors, windows, stairs, furniture, musical instruments, pencils, sports equipment (skis, snowboards, hockey sticks), wooden packaging for fruit and vegetables, etc.

An inspection is possible. ... mais informação

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower-Manufacturer: HVB Hansa Ventilatorenbau, radial fan type B450-1K-X / L / UX1103-Motor: Siemens 15 kW 2940 rpm-Volume flow: 15000 m3 / h-Connection: inlet Ø 440 mm-Connection: outlet 350 x 440 mm-Dimensions: 1080/950 / H855 mm-Weight: 244 kg

Edge banding machine Brandt type KTD Specifications: • Glue pot • Conversion: carried out by the company Hüttenhölscher in Verl • Field of application: Adhesive application system for handle strips • Vacuum table: included • Automatic pressure zone: included  ... mais informação