robôs usadas para venda

Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

KAWASAKI YF03N ULTRA HIGH SPEED DELTA ROBOT The Y Series robots are parallel type pick & place robots and offer quality and reliability. Brand Kawasaki Type YF03N Year of construction 2010 Serial number YF0030012 Electrical connection 400 V Total dimensions L 2400 mm Total dimensions W 2350 mm Overall dimensions H 2750 mm Description of the Kawasaki YF03N robot Type Parallel Kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) 1 ± 0.1 Range of motion (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) 2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volts; camera; Software; instructions; components; Iron frame, with control cabinet; 2x connection cable 5-pin; Control panel E40E-A003

5955 WITTMANN W621 ROBOT, LINEAR ROBOT Wittmann W621 - 2149 Manufacturer: Wittmann Model: W621 - 2149 Year of construction: 2006 Condition: very good (used) Weight: 255 kg Load capacity: 10 kg Dimensions: 2400 x 1000 x 2500 mm Axis: X: -350 J: -1000 Z : -1500 B: left 180° - right 180° Control: Wittmann, Teach Box

Kuka power cable X20/X30 in special length 50 m immediately available from stock.  ... mais informação

Country of production: Sweden Year of production: 2002 Reach: 800 mm Control: M2000 Load capacity: 6 kg ... mais informação

-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.

Axles: 6 Type: S3Q883-1-1 Load: 3kg Range: 677mm Year of construction: 2004 Condition: used spare parts carrier Accessories: Cable, handheld MCP 4, control, adept CIP 2  ... mais informação

for Mechanics: IRB6600/6640 Control: IRC5 M2004 Year of construction: 2011 Condition: used spare parts carrier Accessories: No accessory. Including: DSQC 668 DSQC 663 DSQC 627  ... mais informação

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production  ... mais informação

Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.  ... mais informação

Kuka robot from Engel, model KR C4. SN: 396400. In very good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000. ...

Only robots, as in the photos.  ... mais informação

SEPRO belt conveyor in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Robot SEPRO SR4030 S3 , visual 2, demoulding axis X : 800mm, vertical axis Y : 1750mm, horizontal axis Z : 3000mm  ... mais informação

number of controlled axis: 6 workpiece weight: 210 kgthroat: 2697 mmtotal power requirement: kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

number of controlled axis: unkt. workpiece weight: unbkt kgthroat: unbkt. mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

number of controlled axis: 6 workpiece weight: Unbkt kgthroat: bis 8000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação