- A. MEIER (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABSOLUTE (1)
- ABUS (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (3)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTREX (1)
- ALTRONIC (1)
- ALZMETALL (1)
- AMADA (3)
- AME (1)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANNOVI REVERBERI (1)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARNO (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BAUER (2)
- BAXTRAN (1)
- BAYERN TOOLS (3)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETTER PACKAGES (1)
- BIG (7)
- BINDER (1)
- Bito (2)
- BLACK STEEL (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (6)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOTECH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BWF (3)
- BÖSSINGER (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARL SCHENCK (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CEMER (1)
- CFM (1)
- CLABER (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COYNCO (5)
- CTS (1)
- Custom made (2)
- DAIKIN (1)
- ... mais
Fabricante:
(Categoria: 2500)
Ano de construção: 2016
usava
This MECANUMERIC MECAPRO 3020 Milling machine was manufactured in the year 2016 in France. It is equipped with a Mecapro control unit. ... mais informação
Ano de construção: 2016
usava
This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. ... mais informação
Ano de construção: 2016
usava
80 € Description: 220 V, 2600 W, on castors, with electric drum pump FLUX FEM 4070Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm, weight approx.: 60 kg ... mais informação
Ano de construção: 2017
usava
70 € Description: Serial number ,P 5000 PN/D-17-03-3469Approx. Onsite Dimension. (l x w x h): 500 x 400 x 500 mm, weight approx.: 50 kg ... mais informação
Ano de construção: 2017
usava
700 € Description: serial number: 0197 , pressure: 4-6 bar air consumption: 1500 l/min filter cleaning: semi auto filtration class: m , capacity: 50 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 2017
usava
700 € Description: serial number: 11988 , pressure: 4-6 bar , air consumption: 1500 l/min filter cleaning: semi auto filtration class: m , capacity: 50 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 2017
usava
700 € Description: pressure: 4-6 bar air consumption: 1500 l/min filter cleaning: semi auto filtration class: m capacity: 50 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 2017
usava
Dry vacuum cleaner for difficult industrial applications, 3.6 KW; 230 V; Pneumatic AirShock; Pocket filter 14000 sqcm (new + 1x older washed as a reserve); Vacuum: 205mbar; Air volume: 158l/sec; Sound pressure level: 73 dB; Extras: Replacement motor head 1x used or various hose packages - 4m or 15m, or nozzles (motor head / hoses exclusive - extra negotiable)
Ano de construção: 2017
usava
15 € Description: rated power 1900 watts . maximum pressure 10 barApprox. Onsite Dimension. (l x w x h): 510 x 660 x 1,450 mm, weight approx.: 80 kg ... mais informação
Ano de construção: 2017
usava
This Mitsubishi Electric Glider Evo CLA 660 Cooling machine was manufactured in the year 2017 in Italy. ... mais informação
Ano de construção: 2017
usava
Ano de construção: 2017
usava
WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from: -a- The destacking position on the buffer (this is also the ...
Ano de construção: 2018
usava
Propellers size from 38 Inches up to 80 inches CU1 and CU4 ... mais informação
Ano de construção: 2018
usava
Commercial Joint Pre-Roll Machine for Condition: very good / NEW FEATURES 72, 143 or 453 Pre-Rolled Joints Significantly Faster Than Competitors Durable & Built for Commercial/Industrial Use Food-Grade Components Designed, Manufactured & Assembled in the USA OSHA Compliant ... mais informação
Ano de construção: 2018
usava
300 € Description: Serial number ,1800271Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,200 mm, weight approx.: 600 kg ... mais informação
Ano de construção: 2018
usava
Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...
Ano de construção: 2018
usava
500 € Description: Rotary arm die-cutter Features: Work table: 900x450 mm Arm length: 370 mm Maximum power: 25 T 245 KN Dimensions (WxDxH): 900x960x1425 mm approx. Net weight with oil: 880 kg Further information can be found in the attached documentation, the reliability of the data is not guaranteed. ,Approx. Onsite Dimension. (l x w x h): 1,000 x 1,010 x 1,425 mm, weight approx.: 800 kg
Ano de construção: 2018
usava
We offer you a Keyence IM-7000 measuring projector from a current utilization. Year of construction 2018 Condition: Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89281 Altenstadt The sale is without warranty Subject to prior sale
Ano de construção: 2018
usava
25 € Description: Manufacture number 722346 Carrying capacity 1000 kg/m² , Collection volume 200 lApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 370 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 2018
usava
2.500 € Description: serial number 1809040 ,laser type CO2 , laser power 100 W max.working area 300 x 300 mm radiation wavelength 10.64 um power input 1 kW laser power 100 W marking speed ≤7000 mm/s , min. line width 0.1 mm , min. mark 0.5 mm Approx. Onsite Dimension. (l x w x h): 1,450 x 950 x 1,400 mm, weight approx.: 150 kg