- A. ELECTRICA (1)
- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- ABSOLUTE (1)
- ABUS (1)
- AC-MOTOREN (1)
- Adixen (2)
- ADL (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALPHA LAVAL (1)
- ALTRONIC (1)
- AMADA (2)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMPEREX (1)
- ANGELANTONI (1)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (2)
- AUER (1)
- AVK (1)
- AVOCENT (1)
- AZEA (1)
- BACHER (1)
- BAKA (2)
- BANK (1)
- BAUER (4)
- BAUTERMIC (1)
- BAYERN TOOLS (5)
- BBC (1)
- BEER-FÖRDERTECHNIK (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- BIOSAN (1)
- Bito (2)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (6)
- BOSCH REXROTH (1)
- BOSCHE (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (4)
- BRONSWERK (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BRÜHL (1)
- BUDERUS (1)
- BUHLER (1)
- BUSCH (1)
- BWF (2)
- BÜHLER WÜRZ (1)
- BÖLLHOF (1)
- CA-02 (1)
- CABELTE (2)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARL STAHL (2)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CLEAN FORCE (2)
- CLENA (4)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- CONCEPT LASER (1)
- CONTEC (1)
- CTS (1)
- Custom made (2)
- DAEWOO (4)
- DAF (1)
- DANFOSS (1)
- DANOBAT (1)
- DANTHERM (1)
- ... mais
Fabricante:
(Categoria: 2500)
Ano de construção: 1997
novo
10000 liters diesel storage tank, tested as new. ... mais informação
Ano de construção: 1997
usava
Available in stock 1 x Used Saer Electropump KF / 2. The equipment is used but in good working conditions. H: 55 - 5 m RPM: 2850 RPM Flow: 0.6 - 3.6 m3/h Voltage: 220 V Frequency: 50 Hz Horsepower: 0.75 HP / 0.55 KW ... mais informação
Ano de construção: 1997
usava
140 € Description: • Electric sweeper • Serial number 010222 • Power 6.70 KW • Working width 750 mm • Theoretical performance 10000 m²/h • Waste hopper capacity 100 liters • Maximum speed 8 km/h • Maximum working incline 18 % • Operating hours according to the counter 1042 • HONDA 4-stroke gasoline engine • It doesn't turn on. The battery is probably deadApprox. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,380 mm, weight approx.: 450 kg
Ano de construção: 1997
usava
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
Ano de construção: 1997
usava
This SIHN ring piece was manufactured in the year 1997. 10 units available. ... mais informação
Ano de construção: 1997
usava
This PIVATIC P125 was manufactured in 1997. A punching machine capable of handling steel up to 450 N/mm² and stainless steel up to 700 N/mm². It features a cutting and punching length up to 2500 mm, with a coil width range from 300 to 1250 mm. Designed for efficient and precise sheet metal processing. Contact us for more information about this punching machine.
Ano de construção: 1997
usava
350 € Description: Machine number: 0053 Operating voltage: 240/380 V Frequency: 50 Hz Output: 2 kW Gas type: natural gas The machine is equipped with a rotary indexing plate with a total of 6 stations and a control system from SIEMENSApprox. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,300 mm, weight approx.: 2,000 kg
Ano de construção: 1998
usava
50 € Description: Connection: 1400 W Brush diameter: 550 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 700 x 1,100 mm, weight approx.: 300 kg ... mais informação
Ano de construção: 1998
usava
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
Ano de construção: 1998
usava
Kadia 2PH 60/350 T Vertical Honing machine was manufactured in the year 1998 in Germany. It is equipped with a KADIA UCP 1500 control unit. The machine has a spindle speed of 1400 rpm. ... mais informação
Ano de construção: 1998
usava
This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage. ... mais informação
Ano de construção: 1999
usava
20 € Description: Machine number: 1362 Operating voltage: 230 V Frequency: 50 Hz Connection: 2.2 kW Speed: 1400 rpmApprox. Onsite Dimension. (l x w x h): 630 x 400 x 1,300 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 1999
usava
100 € Description: Volume: 150 l Tmax: 50 °C HP / bar: 11 Tmin: -10°C Factory number: ,MB 29147511Approx. Onsite Dimension. (l x w x h): 600 x 400 x 1,400 mm, weight approx.: 80 kg ... mais informação
Ano de construção: 1999
usava
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional ... mais informação
Ano de construção: 1999
usava
Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached. ... mais informação
Ano de construção: 1999
usava
- Power supply ES 030-10 - Ulbrichtkugel ISP 80 - Built in 1999 - fully functional - Visit possible by appointment ... mais informação
Ano de construção: 1999
usava
Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC
Ano de construção: 2000
usava
COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS
Ano de construção: 2000
usava
for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog , ... mais informação
Ano de construção: 2000
usava
This DANOBAT PGA-1 punching machine was made in the year 2000. The machine has a punching force of 300 kN and sheet metal dimensions of 1500 x 3000 mm. ... mais informação