moinhos usadas para venda

Ripper 1 shaft With hydraulic pusher, brand: Laiotz, model: R-820/1000, cutting chamber: 800x800 mm, motor: 100 hp, rotor: 800x600 mm, blades: 40x40. Electrical panel. At Gester we know that rip mills are indispensable machines in the plastic market, designed to reduce the size of different types of parts, by crushing them. Machine oriented to the rough crumbling of a wide range of dimensions of raw material such as films, obtaining final granulometries less than 50mm. The feeding system will be adapted to the type of plastic to be crushed (hardness, size, shape) to obtain the maximum performance of the mill.

Shredder mill with blades Brand: Maquiplast. Cutting chamber: 1000x800 mm with 5 rows of blades on the rotor. Motor: 125 hp and electrical panel.  ... mais informação

Shredder mill with blades Brand: Prat, model P-6, open rotor: 800x600 mm, motor: 50 hp, electrical panel, screen: 20 mm, double rotor in ladder of 3 blades, vacuum cleaner: 5.5 hp and tripod with cyclone silo for big-bag filling. Set spare blades.  ... mais informação

Shredder mill with blades Brand: Previero, cutting chamber: 810x180 mm. For shredding. Engine: 55 kw (75 hp). Electrical panel  ... mais informação

Year: 2006 - technically efficient, ready to work – after full service - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping  ... mais informação

mill low speed / crusher Moditec Bigger 10 2003 year // very good condition  ... mais informação

Currently without electric circuit ... mais informação

Profile granulator, with inclined trestle and hopper for plates. ... mais informação

Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm ... mais informação

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding  ... mais informação

Engine: 160.0 kW Rotor diameter: 800 mm Rotor width: 1200 mm  ... mais informação

Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.  ... mais informação

Propulsion: 22 kW With control cabinet and sound insulation  ... mais informação

Twin-shaft shredder Drive 37.50 kW  ... mais informação

Power supply: approx. 400 x 1250 mm Rotor width: approx. 1250 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 9 Propulsion: 75 kW  ... mais informação

New machine GSL 180/180 Rotor diameter 180mm Rotor width 180mm Drive 3 KW Rotor blade 18 Weight approx. 140 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common vacuum systems. Advantages: Special rotor knives make adjust ...

New machine GSL 180/300 Rotor diameter 180mm Rotor width 300mm Drehzal 150 min. Drive 4 kW Rotor blade 30 pieces Strator knife 2 Screen perforation 5mm Weight approx. 180 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...

New machine GSL 300/400 Rotor diameter 300mm Rotor width 400mm Drehzal 150 min. Drive 7.5 kW Rotor blade 33 pieces Strator knife 2 Screen perforation 6mm Weight approx. 550 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common  ...

New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...

Crushing of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with a rotor diameter of 250 mm and widths of 300, 450 to 600 mm. The curved back wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, rotor and stator blades can be adjusted outside the machine to reduce downtime during maintenance. The highly tangential, curved back wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material pick-up and minimizes the risk of blockages. The compact granulators are suita ...