subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 1200)
A vacuum butterfly mixer with container is available. Mixer: lifting height: 650mm, butterfly agitator inserts: 3, butterfly speed: 72-720rpm, scraper arm speed: 17rpm, control: Siemens Sinatic HMI, dimensions X/Y/Z: approx. 1360mm/2650mm/2450mm, weight: approx. 2400kg. Tank: mixing chamber volume: 100l, mixing chamber pressure: 0bar-1bar, heating/cooling chamber volume: 13l, heating/cooling chamber pressure: 3bar, tank jacket operating temperature min./max.: 15°C/150°C, max. bearing and seal operating temperature: 130°C.
Operating pressure: 10bar, rated power: 11kW, max. volume flow: 1.2m³/min, voltage: 400V, frequency: 50Hz, cooling: air-cooled, drive type: direct drive, dimensions X/Y/Z: approx. 1200mm/1000mm/1600mm, weight: approx. 500kg. Documentation available. ... mais informação
Extinguishing water pump Grundfos CR64, flow rate: 64m³/h, delivery head: 145m, speed: 2960rpm, max. pressure: 25bar, max. temperature: 120°C. ... mais informação
Air volume: 4000m³/h, speed: 3600rpm, ambient temperature: -10°C-50°C, noise level: 80dB(A), dimensions X/Y/Z: 2000mm/1100mm/1500mm, weight: approx. 970kg. Documentation available. ... mais informação
Various heating oil, VA containers and VA tanks are available. 1) Vertical VA tank with 5 feet, volume: 40m³, diameter: approx. 2500mm, height: approx. 6000mm. 2) Vertical VA tank with 5 feet, volume: 25m³, diameter: approx. 2500mm, height: approx. 4000mm. 3) Vertical VA tank with 5 feet, volume: 35m³, diameter: approx. 3000mm, height: approx. 5000mm. 4/5) Two double-walled VA tanks, volume: 50m³, diameter: approx. 3800mm, height: approx. 5500mm. Including agitator. 6) Transport tank mounted on container frame with 3 separate chambers, chamber volume: 4m³, total volume: 12m³, drain: central, cleaning: via spray heads. 7) Heating oil tank, volume: 30m³, diameter: approx. 2500mm, length: approx. 8000mm. 8) Heating oil tank, volume: 10m³, diameter: approx. 2000mm, length: approx. 4000mm. A further 7 (8-14) partly mobile V2A tanks with volumes from 1m³ to 11m³. A further 5 built-in ...
A suction unit and cutting machine are available. Extraction unit Esta IG 24, dimensions X/Y/Z: approx. 900mm/900mm/2000mm. Cutting machine Karl Tränklein PS 1200, dimensions X/Y/Z: approx. 1000mm/1000mm/750mm. On-site inspection is possible. ... mais informação
A distillation machine for the separation of colors and solvents is available. Filling capacity: 25l, solvent distillation time: approx. 4h-5h, rinse water distillation time: approx. 13h, cooling time: 3h-7h, operating temperature: 50°C-200°C, power: 2kW, oil type: Essotherm 500, oil capacity: 12l, cooling type: air cooling. Dimensions X/Y/Z: approx. 600mm/1000mm/1200mm, weight: approx. 130kg. Documentation available. On-site inspection is possible.
A universal Robatech melter for processing reactive hot melt adhesives is available. 1) Melting unit: container diameter min./max.: 120mm/148mm, container length min./max.: 130mm/200mm, max. melting capacity: 10kg/h, max. adhesive viscosity min./max.: 500mPas/120000mPas, working temperature min./max.: 20°C/210°C, temperature accuracy: +/-0.5°C, weight: approx. 80kg. 2) Robatech SX Diamond spray head: temperature range: 20°C-200°C, max. adhesive pressure: 75bar, adhesive type: thermoplastic adhesives, adhesive viscosity min./max.: 500mPas-5000mPas, spray element width: 18mm, adhesive exit: 5ms. Documentation available. On-site inspection is possible.
Three identical storage tanks from Ziemann Holvrieka are available, which are used in the brewing industry. Diameter: 1200mm, height: 2500mm, volume: approx. 2800l. Available from the end of Q4 2024. ... mais informação
Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg. ... mais informação
Two identical Sawa self-priming centrifugal pumps are available. Max. flow rate: 70m³/h, max. delivery head: 43m, min./max. pumped liquid temperature: -30°C/130°C, max. pumped liquid viscosity: approx. 500mPas, max. nominal pressure: PN10. An on-site inspection is possible. ... mais informação
Two identical AZO aluminum silos are available. Volume: 10m³/10000l, diameter: approx. 1960mm, height: approx. 3300mm, products: Powdered sugar/cocoa (heavily de-oiled)/lactose/whey/skimmed milk, bulk density: 0.6kg-0.7kg/l, conveying capacity: 1500kg-2000kg/h, material: A2-2, frame: painted. Including vibration discharge trays, separators, top filters, pneumatic conveying system with 2 pressure blowers. Documentation available. On-site inspection is possible.
Three Remeza compressors and a Haro feed pump are available. 1) Remeza Remcomp SB4/C-100, year of manufacture: 2011, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 2) Remeza Remcomp SB4/C-200, year of manufacture: 2012, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 3) Remeza BK7, year of manufacture: 2008, type: screw compressor, output: 700l/min, max. operating pressure: 10bar, power: 5.5kW. 4) Haro GF feed pump, year of manufacture: 2020.
A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible.
Two identical Claudius Peters industrial blowers are available. Power: 97.2kW, speed: 1680rpm, flow rate: 58.2m³/min, pressure: 1bar, secondary pressure: 0.8bar, pressure difference: 800mbar. On-site inspection is possible. ... mais informação
Two compressors and one exhibitor are available. 1) Compressor Renner RSK-Pro 2-30, year of manufacture: 2019, max. pressure: 10bar, volume flow: 4610l/min, power requirement: 30kW, machine dimensions X/Y/Z: approx. 1630mm/820mm/1630mm, operating hours: 16276h. 2) Compressor Atlas Copco GA 15, year of manufacture: 1992, max. pressure: 10bar, volume flow: 1610l/min, power requirement: 15kW, machine dimensions X/Y/Z: approx. 1160mm/790mm/970mm, operating hours: 53856h. 3) Exhibitor Atlas Copco FD 40, max. pressure: 20bar, machine dimensions X/Y/Z: approx. 940mm/470mm/570mm. Documentation available. On-site inspection is possible.
Two almost identical Andritz curved screening machines are available. 1) Andritz BW 1000, condition: as new in original packaging, screen width: 1100mm, wire spacing: 0,5mm, weight: 410kg, operating weight: 1100kg. 2) Andritz BW 2000, condition: overhauled by the manufacturer. Documentation available. On-site inspection is possible.
An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible.
Three almost identical vertical agitator bead mills are available. 1) KD15, year of construction: 1980s, flour hopper: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 2) KD15, year of construction: 1980s, flour container: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 3) KD20 BC, year of construction: 1980s, flour container: 16.5l, motor power: 17.5kW, flour capacity: 70l-500l/h, flour body diameter: 0.5mm-2.5mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1300mm, weight: approx. 700kg. Including paint pumps. On-site inspection is possible.