Fabricante:
(Categoria: 209)
COMAFER grinder model DINAMIC MAC 500 for wood waste: - hourly production from 100 to 200 kg/h - rotor motor HP10 / kw 7.5 , volt 380 - rotor diameter D=160mm, with knives - Pneumatically operated feed drawer - Hopper dimensions 965 x 500 mm - Overall dimensions approx. 1.7 x 0.95 x h=1.5 m - weight about 800 kg - machine according to CE standards, year 2000 AVAILABILITY FROM APRIL 2024
Length: 11,250mm, width: 5250mm, height: 2600mm. ... mais informação
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. ... mais informação
Manufacturer_ STEINEMANN Model_ OSUS NOVA Working Width: 1300 mm N. of heads_ 2 ... mais informação
CNC controlled edging machine serves to edge curved and shaped panelsPanel thicnkess: 16 - 50 mm.Edge thickness: 0,8 - 3 mm.Dimensions: min 400 x 400 mm, max 1800 x 1800 mm 650 x 2500 mmunit 1: glue roller with edge coil magazineGlue pot with 3 l capacity.Unit 2: end trimming motormotor 0,8kWUnit 3: Trimming unitmotor 2 x 2.2kW
Ott Edge Banding Machine Profimatik M 257-FÜ with pre-joining used, good condition Make Ott Type Profimatik M 257-FÜ Year of construction 2001 Banding thickness 20 / 25 mm Banding height 60 / 65 mm heated inlet ruler Thick edges up to 20 / 25 mm Caps from the roll up to 3 mm Pre-joining with DIA tools 2 x 1.8 kW Cross-cut unit 0°/20° - 2 x 0.8 kW Flush milling 2 x 2.2 kW Bevel milling 2 x 0.6 kW Radius milling 2 x 0.6 kW Radius Scraper Blade Copy corners 4 x 0.8 kW Grinding unit Edge finishing (buffing) Auto. Edge magazine Feed rate infinitely variable 8 - 24 m with motorized adjustment Granulate high-speed heating basin (EVA) Route control Program control with 98 programs Soundproofing hood Large roller support High-speed heating basin with automatic Synchronization and counter-rotation control of the glu ...
Minimal/ nominal volume flow: 1448/ 1850m³/h, motor power: 2.2kW. ... mais informação
Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... mais informação
SECOND-HAND ORBITAL SANDER COMEC LC/20/AV - CE RULES - min/max diam. 10/160mm - with feeding units - volt. 400/80 - sn 010118 - year 2001 ... mais informação
Fully automatic nailing system for pallets/crate elements Control Simens equipped with new Bositich / N - Coil - NAgler, Kontakt 60 incl. Jumbo Magazine ... mais informação
Manufacturer: HolzHer, Type: 1411-1, Year: 2001, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 230, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11, Glue system granulate/cartridge: Patrone, Buffing unit: yes, Machine lenght mm: ca. 4.100, Wight approx. kg: ca. 1.100, Year :2001
Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001
Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001
Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001
Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg
SECOND-HAND SPINDLE MOULDER SCM MOD. T150 - CE RULES - volt. 400/50 - matr. AB/142970 - year 2001 ... mais informação
SECOND-HAND 4 SPINDLES FOUR SIDE MOULDER SCM MOD. SINTEX XL – CE RULES Spindle configuration: bottom right left top - working width mm 180 - working height mm 120 - year 2001 ... mais informação
4-side squaring and edge banding lineMachine 1:Fixed side right, moving side leftRolling chain, feed 10 - 40 m/minControlls NC 21Panel thickness 8 - 60 mmMax. panel width 1500 mmEdges: coil 0,3 - 3 mm, strips 0,4 - 20 mmEntry fence for veneered panelsEquipment:1+1 Compact-twin hogger, 2 motors 6,6 kW1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application1+1 Free space for solid wood edges up to 2,54 m length1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm)1+1 Universal shaper 8,1 kW1+1 Universal shaper 8,1 kW1+1 Edge sander KS 101+1 Disc sander DS 401+1 Disc sander DS 40Angular transfer to the right, TWR 24/30/12/SPanel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mmMachine 2Machine II + infeed magazine TW 24Fixed side right, m ...