- Moinhos de corte (110)
- Moinhos de granulação (19)
- Pulverizadores (4)
- Trituradoras (16)
- Trituradores de anexo (4)
- mais
- ALPINE (1)
- ALPINE HOSOKAWA (1)
- ANKELE (1)
- AUGUST SEEGERS (1)
- AVIAN ENG. (1)
- BAUERMEISTER (1)
- BELLAFORM (1)
- BRIDGE (1)
- BUZULUK (1)
- CMB (1)
- COMPEX (1)
- Condux (8)
- CUMBERLAND (1)
- DHB (1)
- DREHER (1)
- EREMA (1)
- EUROTECNO (1)
- FOLCIERI (1)
- G15035-DT (1)
- GETECHA (3)
- GINES,BARCELONA. (1)
- GUANGZHOU (1)
- Herbold (15)
- HERBOLD/REFAKT (1)
- HORN - WEGOMA (1)
- KOMPTECH (1)
- LAIOTZ (1)
- MAQUIPLAST (1)
- MARTIPLAST (1)
- MATEU I SOLE (8)
- MATEU SOLE (1)
- MECCANICHE MODERNE (1)
- MLA (1)
- MODITEC (1)
- MöSER MASCHINENBAU (1)
- NAVARRO (2)
- NETZSCH CONDUX (1)
- NEUE HERBOLD (6)
- OVER (3)
- Pallmann (4)
- PONAR ZYWIEC (1)
- PRAT (14)
- PREVIERO (1)
- Rapid (17)
- RODOLFO COMERIO (1)
- ROTOX (1)
- SANT ANDREA (1)
- SCOINER (1)
- SEM (1)
- SHAW ROBINSON (1)
- Shini (2)
- SILMISA (1)
- SORIANO (3)
- TECNITORN (2)
- TRIA (2)
- TRICKY (1)
- TRIT (1)
- URBAN/MLA (1)
- Vecoplan (4)
- VESPA (14)
- Wanner (6)
- WITTMANN (1)
- ZENO (3)
- ZERMA (9)
Fabricante:
(Categoria: 309)
usava
Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4 ... mais informação
usava
Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm ... mais informação
usava
Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW ... mais informação
usava
Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW ... mais informação
usava
Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories ... mais informação
usava
Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box ... mais informação
usava
For rolls, plates, etc. With horizontal feed mechanism Working width 1050 mm, maximum inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW ... mais informação
usava
usava
Inlet: approx. 400 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 5 x 2 Drive: 55 kW ... mais informação
usava
Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW ... mais informação
usava
Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW ... mais informação
usava
Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame
usava
Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW ... mais informação
usava
Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9 ... mais informação
usava
Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knife: 2 Rotor blade: 4 x 2 Drive: 30 kW Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW ... mais informação
usava
Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4 ... mais informação
Ano de construção: 1991
usava
Cutting mill with compact sound insulation Drive 30 kW with electric control with manual feed funnel Housing opening: lifting spindle (manually operated) with fan 7.5 kW Screen insert: 8 mm ... mais informação
Ano de construção: 1991
usava
Cutting mill with compact sound insulation Drive 30 kW Working width: 600 mm Rotor diameter: 450 mm with electric control with manual feed funnel Housing opening: lifting spindle (manually operated) with fan 7.5 kW Screen insert: 8 mm ... mais informação
Ano de construção: 2022
novo
Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy
Ano de construção: 1998
usava
NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives ... mais informação