<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now ... mais informação
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now ... mais informação
AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-AdapterAvailable: now ... mais informação
Carriage for Agfa Avantra 44 - see pictureAvailable: now ... mais informação
Spinner for Agfa Avantra 44S - clompete refurbished Jan.2011 with warrantyAvailable: now ... mais informação
AGFA Apogee Viper PDF-Rip including Dongle, CDs, APIS-Board and APIS-AdapterAvailable: now ... mais informação
AGFA Viper 1.9 Software-Rip including Dongle, CDs, APIS-Board and APIS-AdapterAvailable: now ... mais informação
Complete System YOM 1998 - installed 1999 - still in production - Avantra 44S with 3600 dpi - Online-Rapiline for Avantra44 - Basket, Cables, all complete System with Service-contract, complete tested and cleanedAvailable: in Produktion ... mais informação
Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleanedAvailable: in production ... mais informação
Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates. ... mais informação
PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
max. format 68 x 75 cm Year of construction 2007 CTP System for Thermal Plates Autoloader Inline register punch 425 mm Plate stacker PST 26 incl. RIP / Software / Calculator Air Compressor Atlas Copco Price on request. We deliver and install worldwide! ... mais informação
S. No.: AAC02761-0502-6018 REV 3 Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device - Destacker - RIP ... mais informação
M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi
PJ.003.0000, CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, 64 Diodes, External Drum, Throughput 17 Plates/Hour At 2540 DPI, With Plate Processor Raptor 85 Thermal, Complete With Software And Dongles, Laser Exposure Time: 211232 Pieces, Total Exposed Plates: 5937 Hours, Complete With Accessories
Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.
Kodak Achieve 400 PR S-Speed (approx. 16 plates/h) year 2018 with Autoloader ... mais informação
Kodak Achieve 400 PR S-Speed (approx. 16 plates/h) year 2018 with Autoloader ... mais informação
Kodak Trendsetter Q400 XPO TDL F-SPD (approx. 43 plates/h) year: 2017 with Autoloader ... mais informação