outras máquinas de energia usadas para venda

Four Hyfra TRK90-ÖF-S are available, cooling capacity: 11.6kW, max. ambient temperature: 42°C, connected load: 9.8/11.3kW, weight: 170kg. ... mais informação

Power: 30kW, weight: 930kg, operational hours counter: ca. 85,000h, without frequency converter. ... mais informação

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

Güntner dry cooler, GFW090.1/4-S Jenbacher CHP, 600kW at cooling water Temp. 90 - 70 degrees C. EC fans with Güntner GMM speed control.  ... mais informação

Temperature control unit, heating, hot water boiler, hydronic system, hydraulic station for high pressure cleaner, high pressure pump-Temperature control units for: water-electric heating for: pressure washer, high pressure pump-Manufacturer: Frigotrol-Type: S-TT 50/108-D-Power: 110 kW-Connection:-permissible operating pressure: 6 bar-Dimensions: 1548/890/H1630 mm-Weight: 380 kg

350kva & 300kva meccalte new Un-Used Surplus AC alternators Generator Motor available in stock.  ... mais informação

Cooling output: 5.4kW, length: 765mm, width: 930mm, height: 1680mm, weight: 187kg, an on-site inspection is possible. ... mais informação

Volume flow: 1000m³/h, max. rotational speed: 3000/min, motor power: 0.45kW, length: 6050mm, width: 920mm, height: 1370mm, an inspection is possible. ... mais informação

Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.

description: S7 control for full bottle transport. Partial range from filler to labeler. capacity range was approx. 55,000 beer bottles 0.33/0.5 l all information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to h ...

Brake module, brake unit, brake chopper-Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2-Type: EMB9352-E-Input: DC 725V Imax=25A-Output: Pav= 19 kW Ppk = 32 kW-Number: 1x braking module available -Dimension: 55/380/H185 mm -Weight: 2.3 kg ... mais informação

Cooling output: 11,000W, max. operational pressure: 30bar, connected load: 6.5kW, an inspection is possible. ... mais informação

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors-Manufacturer: Moeller, switch disconnector from CNC machining center Santenberg GTC S 2-Type: P7-160 DAOV-NZM7-Slewing drive: with extension-Dimensions: 440/105/H180 mm-Weight: 2.1 kg

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium voltage  ...

Switch cabinet - cooling device, switch cabinet air conditioner, distribution cabinet, heat exchanger spindle cooler-Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2-Type: HPW-10AR-Voltage: 110V 50/60Hz-Dimensions: 250/75/H580 mm-Weight: 5.7 kg ... mais informação

CNC control, control panel, machining center-Manufacturer: Fanuc, control panel/CNC control from CNC machining center Santenberg GTC S 2-Control: Fanuc Series 18i-TB-Grinding spindle control/balancing: Balance Systems VM25-Transport dimensions: 800/680/H250 mm-Total weight: 48 kg ... mais informação

Oil drip pan 1080 litres Oil collecting tray with feet made according to RAL RG 616, content 1080 litre, material S235JRG2, painted,. Dimensions: Height 750 mm, length 1200 mm, Width: 1200 mm incl. test certificate Year 2012, unused  ... mais informação

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module-Manufacturer: Fanuc, electronic module extension module from CNC machining center Santenberg GTC S 2-Type: 21I EMIOB00021I-Extension module: Type: A03B-0815-C001 4 pcs.-Dimensions: 545/220/H140 mm-Weight: 3 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel-Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2-Type: A20B-2002-052 MES-1A-Extension module: Type: A03B-0815-C001 4 pcs.-Dimensions: 150/110/H30 mm-Weight: 0.2 kg

he Empty container Container Cummins QSV91 or similar genset is available for sale immediately. The floor of the container is very high specs and built to enhance durability in tough conditions. Below are the dimensions for the genset container and air-intake as: Container: 3.5 Meter High 3.5 Meter Wide 12.6 Meter Length Air intake on front: 2.6 meter high 3.3 meter wide 2.9 meter Length For more information and details, feel free to contact us at: Infoukpowergeneratorsltd