máquinas e equipamentos para engenharia de processo usadas para venda

Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.  ... mais informação

1 pc. stainless steel tank with large inspection flap and 3 sampling points, staplerfaehig and stackable additional staplerfaehiger catcher in stainless steel (not pictured) Fasungsvermoegen 1,000 litres Operating pressure 0.1 bar For hazardous substances of class 3 6.1 b and Weight Tank 212 kg Collecting pan approx. 240kg Special price

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Used autoclave - spray sterilizer by Spomasz Pleszew type WSA 7B. New 1991. Technical data: - Working volume: 3.41 m3 - Temp. T0= 151 ºC - Working pressure: 0.4MPa - Weight: 3653 kg - Feed quantity: 4 baskets Automatic temperature and pressure controller + computer for data recording and entry. Good condition, as shown in the photos. Machine in working order. No baskets.

Stephan TC300 Combicut Multifunctional, horizontal machine for cooking, melting, with a vacuum system. This machine is suitable for: dispersing, mixing dips, sauces, dressings, creams, processed cheese products, cream cheese products, cream cheese, etc.! Drum capacity 300 mmr., working temperature max. 105°C, working pressure -1.0 to 1.0bar This machine has previously worked in a processed cheese plant for the production of processed cheese products The machine is completely made of stainless steel, the base is made of stainless steel, original by Stephan New electronic control Siemens S7 - with display Main motor frequency controlled 0-3000 rpm, 3 homogenization meters Main shaft seal: Water cooled Integrated heat exchange system Transport wing with scraper on lid and drum vacuum system, Water dosing system with meter, Direct steam injection, Temperature monitoring by a p ...

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

Stock# U2408-6 Used stainless steel filter press by Filtrox Novox (CH) type Novox 40/40 (plate & frame). Press has 20 stainless steel plates with dimensions 400 mm x 400 mm and 20 stainless steel frames with internal dimensions 380 mm x 380 mm x 28 mm. Working filtration surface 6,4 m2 and working cake volume 80,8 l. Filter press is mounted on stainless steel mobile frame. Manual closing.

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.  ... mais informação

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;  ... mais informação

Double-Z Kneader with heating cooling jacket, tilting; Manufacturer: Kurimoto Material: stainless steel product contact areas Volume: 1275 ltr. Dimensions: L 3.50 m x W 2.00 m x H 2,20 m Weight: 6000 kg.  ... mais informação

Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request  ... mais informação

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Granulator Abrasion : 1,1 KW Operating voltage : 3~380 V, 50 Hz, 220 V, 1.6 A; Rotor speed : 100 - 1150 rpm Rotor diameter : 120 mm Rotor width : 50 mm Number of teeth : 20; --> 2 identical machines in stock.  ... mais informação

Machine name: Cone mixer / dryer Manufacturer: Bolz GmbH Type: MF 400 Year of construction: 1991 Material: Stainless steel Designation: Vertical cone mixer Design: The cone mixer is ground on the inside in korn 240 and pickled on the outside. Total capacity: 9250 litres, net capacity: 4000 litres Contact Parts: V4A 1.4401/04 (316) Dimensions: L 2800 x W 2800 x H 5000 mm Empty weight: approx. 4000 kg Tech. Documentation: Yes Remark: Field of application: pharmaceutical, food, chemical Agitator: screw stirrer Voltage: 400 Volt Motor: explosion-proof Temperature: 80 °C without pressure Accessories: Knocker Condition: Used very good Price: On request

Stock# U2347-1 Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)  ... mais informação

Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 4234h, documentation available. ... mais informação

Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 5003h, documentation available. ... mais informação

High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request