- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- ADL (1)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARBURG (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BAKA (2)
- BANK (1)
- BARTH (4)
- BAS (1)
- BAUER (15)
- BAUTERMIC (1)
- BAYERN TOOLS (5)
- BBC (1)
- BEER-FÖRDERTECHNIK (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- BIOSAN (1)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHE (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (2)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BRÜHL (1)
- BUDERUS (1)
- BUSCH (1)
- BWB (1)
- BÜHLER WÜRZ (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CARL STAHL (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COLUMBUS INSTRUMENTS (1)
- COMAC (1)
- ... mais
Fabricante:
(Categoria: 2500)
Ano de construção: 1996
usava
This WICKERT WKP 2560/5/5 was manufactured in 1996 in Germany. It is equipped with Siemens PLC control S5. This machine has a pressure capacity of 2560kN. Its pressing area is 500x500mm. It has a piston stroke of 500mm and a piston diameter of 290mm. Contact us anytime for further information. ... mais informação
Ano de construção: 1996
usava
This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN. ... mais informação
Ano de construção: 1997
usava
1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing ma ...
Ano de construção: 1997
novo
10000 liters diesel storage tank, tested as new. ... mais informação
Ano de construção: 1997
usava
Available in stock 1 x Used Saer Electropump KF / 2. The equipment is used but in good working conditions. H: 55 - 5 m RPM: 2850 RPM Flow: 0.6 - 3.6 m3/h Voltage: 220 V Frequency: 50 Hz Horsepower: 0.75 HP / 0.55 KW ... mais informação
Ano de construção: 1997
usava
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
Ano de construção: 1997
usava
This SIHN ring piece was manufactured in the year 1997. 10 units available. ... mais informação
Ano de construção: 1997
usava
350 € Description: Machine number: 0053 Operating voltage: 240/380 V Frequency: 50 Hz Output: 2 kW Gas type: natural gas The machine is equipped with a rotary indexing plate with a total of 6 stations and a control system from SIEMENSApprox. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,300 mm, weight approx.: 2,000 kg
Ano de construção: 1998
usava
50 € Description: Connection: 1400 W Brush diameter: 550 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 700 x 1,100 mm, weight approx.: 300 kg ... mais informação
Ano de construção: 1998
usava
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
Ano de construção: 1998
usava
Kadia 2PH 60/350 T Vertical Honing machine was manufactured in the year 1998 in Germany. It is equipped with a KADIA UCP 1500 control unit. The machine has a spindle speed of 1400 rpm. ... mais informação
Ano de construção: 1998
usava
This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage. ... mais informação
Ano de construção: 1999
usava
20 € Description: Machine number: 1362 Operating voltage: 230 V Frequency: 50 Hz Connection: 2.2 kW Speed: 1400 rpmApprox. Onsite Dimension. (l x w x h): 630 x 400 x 1,300 mm, weight approx.: 70 kg ... mais informação
Ano de construção: 1999
usava
2.800 € Description: Chiller MONTAIR Srl Serial number : 976999 Voltage : 400 V Power : 51,5 Kw Intensity : 126 Amp Refrigerant R-407/ Max load 63 Kg Max. working pressure : 24,5 Bar Approx. Onsite Dimension. (l x w x h): 3,400 x 2,200 x 2,016 mm, weight approx.: 2,600 kg ... mais informação
Ano de construção: 1999
usava
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional ... mais informação
Ano de construção: 1999
usava
40 € Description: • Digital scale • Serial number 6007884 1999 • Capacity 300 kg • Minimum weight 5 kg • Resolution 100 gApprox. Onsite Dimension. (l x w x h): 600 x 600 x 150 mm, weight approx.: 50 kg ... mais informação
Ano de construção: 1999
usava
50 € Description: Voltage 230 V , Power 2400 W, maximum 2760 WApprox. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,300 mm, weight approx.: 20 kg ... mais informação
Ano de construção: 1999
usava
Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached. ... mais informação
Ano de construção: 1999
usava
- Power supply ES 030-10 - Ulbrichtkugel ISP 80 - Built in 1999 - fully functional - Visit possible by appointment ... mais informação
Ano de construção: 1999
usava
Punching machines like the INDUMASCH HP 750 CNC/Z from 1999 are integral for operations requiring precise and forceful metal work. This model, known for its robust construction with a weight of 3240 kg, ensures reliable performance. The machines capabilities are suitable for various industrial applications where punching precision is critical. If youâre considering upgrading your metal fabrication operations, the INDUMASCH HP 750 CNC/Z we have for sale could enhance your production efficiency. Contact us for more information about this punching machine.