desbastadoras usadas para venda

Good day! I would like to offer you the following machine: 1 used thickness planer SCM S 630 - 63 cm planing width - 30 cm planing height - 4-knife Centrofix reversible knife shaft - Infinitely variable feed 6 - 20 m/min. - Steel feed roller - 2 rubber pull-out rollers - Articulated pressure beam - Longitudinally profiled, rollerless thickness table 63 cm x 100 cm - Thickness table adjustment via 4 spindles - Electric table adjustment with fine-stroke tip switch - Digital display with 1/10 mm - 7.5 KW 380 volt motor (reinforced version) - Star triangle switch - Motor circuit breaker - Main switch lockable with undervoltage release - Kill switch - Suction nozzle 150 mm - Weight: 950 KG New parts - Main engine installs new bearings (150,-- € + 19 % VAT) - Infinitely variable feed adjustment knob ...

Working width: 530mm, planing height: 3-300mm, four-blade shaft diameter: 125mm, max. rotational speed: 5000/min, max. chip removal: 8mm, feed: 8/16m/min, motor power: 5.5kW, length: 1200mm, width: 1200mm, height: 1400mm, weight: 680kg, with electric table height adjustment, two adjustable rollers in the thicknessing table and handwheel with digital display for fine adjustment.

Length: 2600mm, width: 685mm, height: 1000mm, weight: 840kg. ... mais informação

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

Thicknesser Brand: Panhans Type: 436/100 New machine TECHNICAL SPECIFICATIONS Planing width 630 mm Planing height 3 - 300 mm Chip removal max. 8 mm Thicknesser table length 1100 mm Blade shaft speed 5000 rpm Motor power feed 0.55 kW / 0.8 PS / 0.75 kW / 1.0 PS Extraction nozzle Ø 160 mm can be used on the left or right Feed speed 7 + 14 m / min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel knife shaft Ø 125 mm with 4 pieces of Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and safe workpiece feeding With sectional pressu ...

working width: 410 mm; cutter head: strip knive; number of blades: 3; surface table length: 2400 mm; adjustment table: Hebel; read out table hight: Scala; fence tilting: yes; motor power: 4 kW; motor brake: no; machine length: 2400 mm; machine width: 800mm; waight: 750 kg;  ... mais informação

 ... mais informação

Description: Max passage cross-section 220x120 mm 4x5.5 hp motor variable feed speed 5 to 30 mt/min siko counters 2 m infeed table Electric raising and lowering of the beam 4 tool holders diam 120 mm 4 irons 4x120 mm suction Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 3,100 x 1,300 x 1,500 mm, weight approx.: 1,500 kg

Description: serial number: M000076467 Size of workpiece Width: 20-230mm Thickness: 8-160mm Feeding speed: 6-30 m/min Infeed table length: 2.000 mm Height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 2nd vertical planer shaft, right, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, left, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 9,2kw, 6.000 rpm 6th UNIVERSAL (vertical or horizontal) planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm Feeding motor power 3 kw serial number: M000076467, planing width: 240 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 2,000 mm, weight approx.: 2,000 kg

Code: 0283 Brand: PAOLONI Model: PR 180 - CE Standard Automatic 4-shaft moulding machine for wooden profiles, wooden frames and various - CE Standard Technical data Working width min/max mm 25/180 Working height min/max mm 6/120 workpiece length min mm 400 Input table length mm 2330 Standard tool diameter mm 125 Tool diameter 1° shaft mm 125 Diameter of trimming cutter mm 145 Diameter min/max tools 2°/3° shaft mm 100/160 Diameter min/max tools 4° shaft mm 100/140 Tool shaft diameter mm 40 Shaft rotation speed rpm 6000 Planer motor power Kw 4 Right and left vertical unit motor power Kw 5,5 Top horizontal unit motor power Kw 4 Lifting motor power Kw 0,35 Feed speed mt/min 6/12 Electric crossbar lift Protection cabin Manual table lubrication pump N° 4 suction inlets diameter mm 120 Overall dimensions mm 3800 x 1200 x 1600 h Weight kg 1550

Description: The machine was only started for tests - maximum of 30 minutes. The test was made without any loads (wood) There for the item is brand new! serial number MP200/S/006/2020 , a reliable planer with a width of 410 mm Logosol DH410 has a lot in common with our PH260. The machine is built on the same principles and most of its components are the same as PH260’s, which means that it is a very sturdy machine with a cast-iron machine table and separate motors for each cutter and the feeder. Both the machines also have the same type of knives and cutter heads. The difference is that DH410 works with two cutters instead of four. Four-sided planing is made by running the board twice through the machine, while you only machine the board once when planing and dimensioning two sides up to a width of 310 mm and a height of 100 mm Improvements in the model 2 include: 2-sided planing/ ...

Description: adjusts and profiles parts as required Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 1,650 mm, weight approx.: 500 kg ... mais informação

Description: - Capacity: 180X120MM - Toolholder with 2 sharpening knives - Machine set-up on QTS digital axes - Centralized lubrication - Lubrication crank handle - Double tool clamping key - Iron adjuster - Soundproof enclosure with electromagnetic safety device - Planer motor: 4KW - Motor for two shapers: 5.5KW - Planer motor: 5.5KW - Feed roller in the outfeed table - Suction intake: 120/100/100/120mm - Machine dimensions: 3000X1000X1450mm - Weight: 1200Kg Machine sold without tools or accessoiresApprox. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,450 mm, weight approx.: 1,200 kg

Working width: 530 mmLength of the planing table: 1550 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2900x 800 x 960 mmweight of the machine ca.: 800 kgSAC type FS 530--------------------------------Working width: 530 mmTotal table length: 2,900 mmFeed table: 1550 mmDispensing table: 1,310 mmTable height: 800 mmPower: 4kWSpeed: 5,000 rpmNumber of knives: 4(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig PM 17 planing and moulding machine for four-sided planing and profiling of wood, including planing heads., spindles: 5, working width: 170 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, Tools: Included ... mais informação

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minCASOLIN MEGA 230/6 four-side planer--------------------------------------------------------Machine still in use to visit!6 spindles, with touchscreen controls.Width and height controlled.Spindle arrangement:1. Spindle: below, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right hand, 40 mm diameter, 6,000 rpm, 11 kW together with3. Spindle: left, 40 mm diameter, 6,000 rpm4. Spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5. Spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6. Spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (belongs to the window system).(technical information according to the manufacturer - without guarantee!)The data for this ad was c ...

 ... mais informação

Thickness planer, Thickness T 44 from Martin with Tersa shaft Planing width max. 630mm Planing height from approx. 3 to 250mm electrically adjustable, reading via LED display in 1/10mm accuracy, fine adjustment via tip button Drive motor 5.5kW Automatic engine brake 4-knife shaft Tersa with new knives 2 Feed speed 6m/min and 12m/min Rubberized infeed roller and rubberized outfeed roller renewed Articulated pressure beam Planed thicknessing table guided on 4 threaded spindles and guides for optimal stability Low-noise design with soundproof hood Suction nozzle 160mm Emergency stop front and rear Original paintwork, only partially reworked Carpet in original condition V-belt renewed Infeed and pull-out rollers renewed New knives CE Mark Dimensions approx. 1300 x 1150 x 1150mm (LxWxH). Weight approx. 1250kg. The machine can be demonstrated by appointment at our s ...

Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------Technical data:-----------------------------------------------Working width: max 240 mmWorking height: max. 200 mmFeed: 6 to 36 m/min1. Spindle-----------------------------------------------First lower spindle horizontalMotor with brake 11 KWDiameter: 40mmSpeed 6,000 rpmFast tool clamping T-SET2. HSK tool holder-----------------------------------------------First right tool holder verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioning3. HSK tool holder-----------------------------------------------First left tool holder, verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioningel ...

Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Weinig, MemoryPlus Weinig Powermat 600 with HSK/Powerlock, axial/radial CNC controlled-------------------------------------------------- Machine is being checkedShort summary:-------------------------------------------------- 5 spindles with 8,000 rpm4 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:-------------------------------------------------- Technical data:Working width: 20-230 mmWorking height: 10 -120 mmNumber of spindles: 51. Tool holder - bottom-----------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 125 - 145 mmTool flight circle rebate cutter: 130 - 160  ...