retificadoras usadas para venda

Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM Power cylindrical grinding device / power drive of face grinding attachment: 4 kW Power work-piece motor / power drive of workpiece engine: 1.5 kW Workpiece spindle speeds / rev's piece of work s ...

internal diameter:140 mmtotal power requirement:5,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:2,8 x 2,5 mmax. workpiece weight:15 kgclamping dia. max.:140 mmclamping length:250 mmmax. bore diameter to be ground:0,8-90 mmmin./max. hole to grind:160 mmcentre height:90 mmworkpiece spindle stepless:112-1000 U/min

table diameter: 1000 mmworkpiece height: 25 mmnumber of wheels: 1 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

The machine is in good technical condition, after agreement the possibility to test. Table clamping area: 200x630 mm Maximum grinding length: 630 mm Grinding wheel - diameter: 250 mm Grinding spindle speed: 2660 rpm. Maximum workpiece weight with chuck: 130 kg Total power input: 5.5 kW Weight: approx. 2200 kg Machine dimensions: (LxWxH): 2710x1495x1670 mm.

grinding length:7000 mmgrinding width:1450 mmworkpiece height:1000 mmdistance between columns:1510 mmClamping area:7.270 x 1.250 mmtable load:35 ttable speeds:1-50 m/mingrinding wheel dia. x width:horizontaler Stößel: 630x180 mmspindle drive:horizontaler Stößel: 22 kWvertical movement:250 mmgrinding wheel dia. x width:universal Stößel: 500x50 mmspindle drive:universal Stößel: 7 kWvertical movement:450 mmspindle motor:7,5 kWpivoting angle:universal Stößel: 45 Gradweight of the machine ca.:65 tMachine size (LxWxH):20.200 x 8.150 x 4.920 mm:PLC SIEMENS SIMATIC OP 27 grinding wheel with flange:diverse Used Surface grinding machine, ELB, type SWN 8 NPC-K.Machine cleaned and tested by qualified technician Functionality tested.Surface grinding machine in perfect condition, ready for production.Payment: 100% before loading the machineWarranty: none

The machine is in good technical condition, can be tested under current. Machine dimensions: 3500x2300x2100 mm Standing weight: 4000 kg Grinding length: 1000 mm. Grinding width: 400 mm. ... mais informação

total power requirement:10,5 kWweight of the machine ca.:4800 kgdimensions of the machine ca.:3000 x 2100 x 2000 mmcentre distance:1200 mmHeight of centres:200 mmgrinding-table stroke max.:X -Achse 1000 mmtable-size:2060 x350 mmz-axis:Querhub 250 mmFeed speed:0,005 - 5 m/min.grinding head - swivable:360 °taper ISO:50 control:Sinumerik System 8 Documents:vorhanden

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction ... mais informação

Sharpening machine for profiled cutters Tool diameter max 290 mm Width of tool max 230 mm Control manually Number of cutters max 931 Disc diameter max 225 mm Back clearance angle 30 ° Side clearance angle up to 20 ° Accuracy per 1000 5 mm Main motor power 1,1 kW Stepless rotational speed control Total connection 1,5 kW Weight 780 kg Space required: Length 1.650 mm Width 1.100 mm Height 1.080 mm

The machine is in good technical condition. Circulating diameter: 295mm Center distance: 1000mm Accessories: grinding wheels, flange, balancing stand, bezel, dresser Weight: 2550 kg Upon prior arrangement, inspection in operation possible ... mais informação

Knife profiling machine for producing profiled knives from a solid blank according to a template. Technical data: Grinding disc diameter max. 225mm Grinding wheel width 5mm Grinding wheel bore 60mm Tool diameter max. 290mm Tool diameter min 90mm Tool width max 230mm Grinding disc drive 1.1KW Motor speed 1420 rpm Stepless gearbox n=500...3000 rpm Grinding spindle speed n 1 = 1720 rpm n 2 = 2000 rpm n 3 = 2500 rpm n 4 = 2820 rpm Radial clearance angle (at the back) 1030 degrees Axial clearance angle (to both sides) 0.20 degrees Coolant pump 0.28KW

max. grinding diameter: 238 - 620 mmgrinding length: 190 mmworkpiece length: 380 - 940 mmspindle turning speed - stepless: 2 - 10000 U/mincurrent capacity: 380 kVApower capacity - grinding motor: 1,1 kWtotal power requirement: 2,2 kWThe machine can be viewed under current.: operating key and instruction: DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL465 / 84380 V, 50 HzColour: green ! Original paint Machine is in conditon from seller !motorised height adjustment, axial grinding spindle adjustmentAccessories: Dividing head Sk 40 with dividing disc 24 R with mounting points for optics Dust extraction device without suction cup Protective cover 3 pcs. transport lugs 1 set of technical sanding instructions Operating key, operating instructions, spare parts list, wiring diagramThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 320 mmgrinding length: 1000 mmcentre height: 160 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Rotary table diameter 300 mm Workpiece height 37 mm Spindle speeds 2500 rpm Machine weight approx. 0.6 t Space requirement approx. 1 x 1 x 1.3 m Cup discs available of size ø85, ø100, ø125  ... mais informação

Center Height : 150 mm Max. Job Diameter : 290 mm Max. Job Length : 1000 mm Grinding Wheel Size : Diameter 400 mm x 50 mm Width Work-Head Speeds : 22.4 rpm to 710 rpm Wheel-Head Speed : 2050 rpm ... mais informação

grinding diameter:180 mmgrinding length:500 mmcentre height:90 mmworkpiece spindle: spindle speeds:120-600 U/minwork piece motor:0,2 kWQuill travel:20 mmweight of the machine ca.:1400 kg ... mais informação

Drill Grinder, Drill Grinder, Tool Grinder, Twist Drill Grinder -grinding wheels: max. Ø 100 mm -Drill holder: up to max. Ø 32 mm -Water-cooled -without collets -Easy and fast -All grinding positions are preset -One grinding wheel for all -operations -Robust construction -Dimensions: 1000/900/H1500 mm -Weight: 650 kg

Table size Dimension table | Tischgröße 280 x 610 mm Axis | Axis | Achse X 450 mm Y 280 mm W 320 mm Z 90 mm Spindle speed Spindle Valocity | Spindeldrehzahl 40,000 rpm Year / Year of Build 1984  ... mais informação

honing diameter: 12 mmstroke: 40 mmthroat: mmtotal power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: m3 spindle honing machine with in process measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

total power requirement:16,5 kWweight of the machine ca.:3,8 t ... mais informação