máquinas e equipamentos para engenharia de processo usadas para venda

Stock# U2308-10 Used stainless steel (316) vertical basket centrifuge by Ametek/Tolhurst Centrifugals (USA) type Batch-Master model B-M with perforated bowl size 48" (1219,2 mm) diameter x 30" (762 mm) height. Machine is designed for periodical work with automated discharge of cake. Working rotation of bowl from 0 up to 1080 rpm. Top feeding, bottom discharge. Machine is mounted on carbon steel supporting frame. Bowl is driven by hydraulic device with power 30 kW, 1470 rpm, 380 V, 50 hz, design Ex. Included control panel and stainless steel conical chute.

Stock# UG6244 Second hand, little used, vertical storage tank designed in PP by Polplast Gliwice (PL) with working volume 30000 l. Diameter 300 cm x Height 500 cm.  ... mais informação

Stock# U2301-1 Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d I ...

Stock number UG6348 Used disc centrifuge by Alfa Laval model MAB 205. Bowl design - purifier. Machine is equipped with pump. Output depends on product and can reach 500 l/h. Machine in working condition. Renovation in 2016  ... mais informação

Stock # UG6349 Used disc centrifuge by WSK Krakow model MAB 205. Bowl design - clarifier. Machine is equipped with pump. Output depends on product and can reach 500 l/h. Working condition. Machine renovated in 2016.  ... mais informação

Stock number: UG6350 Unused screw compressor by Airpol (PL) model K15. Machine can reach output up to 120 m3/h with pressure up to 10 bar. Power supply 15 kW. Includes 500 l tank. Machine new 2021.  ... mais informação

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

Stock number: L0931-06 Used Cannon type GCI/450 l/MI approximately 450 l working capacity and 638 l total capacity vertical white glass lined reactor. Internal approximately 902 mm diameter x 665 mm diameter straight side. Has clamped dished top and welded dished bottom heads. internal rated full vacuum / 2.76 bar design pressure at -10 /+ 230 C. Carbon steel jacket 85 l capacity rated 5.17 / 4.17 bar design pressure -10/+230 C. Includes 3-blade retreat curve agitator belt driven by 1.5 kW 415 V, 3/50, 1420 rpm motor via highfield gears size 5 gearbox rated 31/3 reduction ratio and mechanical seal.

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Stock number: UG6261 Used stainless steel vacuum pump by NSB Gas Processing AG (Switzerland) type PMZF 2507 D3 X3 in Ex design (EEx e II T3/ATEX). Pump is driven by el motor 6.8 kW, 1500 rpm, 400 V, 50 hz. Working output up to 150 m3/h and suction pressure up to 1000 mbar. Pump new 2011.  ... mais informação

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

Rotary tablet press without machine signs with 2 stamp sets 12 and 14 mm 22 kg per hour, with powder mixer both are functional  ... mais informação

For heavy or tähe products, Trough size 840 x 520 x 450mm deep, Full capacity 160L, usable capacity approx. 100-120kg per product, Stainless steel clad, double-walled for heating/cooling, Mixed elements of normal steel, side walls of normal steel, with stainless steel lid with counterweights and limit switch, converted to pneumatic tilting, with control cabinet, and built-in timer: 1 to 7 minutes. Dimensions: 2.2 x 1.2 x 1.4m high (with control cabinet 1.9m high) Weight approx. 1.200kg

Vibro screening machine in flat design SWECO ASAP LP 30S64, Material VA, ø 800, From ø 200, 2 vibro motors Sandwich sieve many new parts Spare screen frame  ... mais informação

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately  ... mais informação

This is a Stainless Steel SS (INOX) basket centrifuge separator, filtering - drying machine. It can be used for clothes dryer, professional laundring and other filtrating application. All material that are in contact with the centrifuge are made out of Stainless Steel. It has a big basket with 120cm Diameter and 60cm Height. The machine weighs approx. 2 tons without the control panel. It is in good working condition and it comes direcly from service with new air suspension (airsprings). It comes as a complete unit with it's PLC and Inverter.

"This is a Stainless Steel Double Jacket 250liter Vacuum Reactor Agitator Mixer Homogenizer system used in pharmaceutical or other applications. It is equipped with a vacuum pump able to reach -15psi and heating through oil or water bath. Inside it has a good overhead agitator and an additional bottom stirring system which will not allow any material lay down and stand still. The bottom stirrer is missing its motor but it has ready for connection the cobbler where the motor would fit onto and should be adjusted according the RPM stirring needs of the application. Unit Specifications: - Vacuum Pump with 1hp AEG single phase motor with -15psi (checked to be in working condition) - Agitator Motor with manual RPM regulator (checked to be in working condition) - Double Jacket Oil Heating System with 3 X 6kw resistances (cheched to be in working condition). Total heating 18kw - Capaci ...

"Basket Centrifuge for material drying with top drying function and removable inside basket with screen for sludge liquid separation and drying, in very good condition, ready for use. Unit Specifications: - Basket capacity 60liters (φ500mm Χ 300mm) made out of Inox Stainless Steel - Removable basket 20liters (φ300mm X 300mm) made out of Inox Stainless Steel with 2mm screen - Top drying fan and 2.2kw resistance (single phase) for quick material drying - Total dimensions Length 700mm X Width 700mm X Height 800mm (total height including drying system 1300mm) - Basket rotation 1485rpm - Motor power 1kw (1,37hp) 3phase - Liquid exit 2 1/2"" inch - Good balance for minimum turbulance"