máquinas e equipamentos para engenharia de processo usadas para venda

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3 MTA S.p.A. TAEevo Tech 201 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. And built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 23.69 Max. current (A) 39,83 Starting current circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200393994 Year of construction 2 ...

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Stainless steel container Manufacturer: Becker Tankbau Capacity 14,250 litres Cylindrical stainless steel tank standing on feet, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product room: non-pressurized, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...

Cooling tower with 950 kW cooling capacity, used as extruder cooling. Complete plant with water treatment, plate heat exchanger, switchgear, pumps. Cooling tower for outdoor installation in stainless steel with 2 fans of 15 kW each. Very energy-saving cooling system in mint condition. Due to relocation.

Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.  ... mais informação

Ball mill, Drum mill, Laboratory ball mill used HEINZ WELTE KG Type: BGAK-6E Drum: Ø 790 x 800 mm Engine 0.75 kW RPM 400 V Dimensions: approx. 1600 x 800 x 1200 mm The mill is suitable for grinding free-flowing products. All items will be checked for function before delivery, if technically possible!

Process vessels Manufacturer : Kuchenbauer Capacity: 194 liters Technical data : Cylindrical stainless steel container, hanging, claws, without frame Double-jacket, steam- or water-heated, pressure-resistant up to 3 bar, operating temperature double-jacket: 140 °C Agitator Interior operating temperature 100 C° Lid

Filter Press Manufacturer : Seitz Type: 20x20 Technical data : 3 cast iron plates  ... mais informação

Filter press stainless steel Manufacturer : Seitz Type: A20 Z Technical data : Stainless Steel Filter Press 4x Filter Plates 2x End Plates  ... mais informação

Stainless Steel Filter Press Manufacturer : Seitz Type: 40x40 Technical data : Stainless Steel Filter Press 40x40 4 filter plates 2 end plates VA Length 1,200 mm (with 12 panels) Wheel-to-wheel width 720 mm  ... mais informação

Multilayer filter Manufacturer : Didier Filtertechnik GmbH Eisenberg Capacity: 170 liters Technical data : Stainless steel filter Double Coat Operating pressure interior 6 bar Indoor operating temperature 200 °C Interior capacity 170 liters Operating pressure double jacket 6 bar Operating temperature double jacket 200 °C Capacity double jacket 12 liters Equipment: closed system, complete emptying, hydraulic pressure of the filter layers Throughput from 1 to 10 m³/h Filter area from 0.28 m² to 2.8 m²

Eddy current Capacity 3 t/h 100% glass Iron ore 48 % Rare Ores 13% Year of construction approx. 1994 Renovation approx. 1998  ... mais informação

Triplex Plunger Pump Unit KD825 URACA for Press Drive consisting of: Pump KD825 URACA Pressure Lubrication unit Water-Oil cooler Reduction bevel helical gear box (angular design) with couplings Base frame open type Discharge ball resonator (pulsation damper) Pressure safety valve, set pressure 360 bar Induction electric motor Process medium: water-oil emulsion Discharge pressure 325/320 bar Capacity 1,330 l/min Pump speed 340 min-1

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;  ... mais informação

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645  ... mais informação

Corrosion protection rectirichtere REctimen Rectiveranel Manufacturer Martin, Velbert Type TG 50/50 Mains 220V 50HZ 15.6A Output 0-50V max 50A Transformer according to VDE 0550 with hardened insulation Type ETOLstg. kVA 3.4 Prima220 V 15.6A Sekundaer 60V 56A Controller Preussler 22160/80.11 Display of the protective current 0-60A Special price

1 pc. stainless steel tank with large inspection flap and 3 sampling points, staplerfaehig and stackable additional staplerfaehiger catcher in stainless steel (not pictured) Fasungsvermoegen 1,000 litres Operating pressure 0.1 bar For hazardous substances of class 3 6.1 b and Weight Tank 212 kg Collecting pan approx. 240kg Special price

Exhaust filter diesel particulate filter cleaning system for free burning of clogged particulate filters. Consisting of heating element and control. Nh7p9 Connection 400 Volt Power 9,000Watt  ... mais informação