subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 201)
cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes; ... mais informação
Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 170 mm; Pre-scorer: yes; Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7 kW; Engine braking: yes / automatic; Suction connection: 80mm and 120mm; Machine length: 3400mm; Machine width: 2000mm; Weight: 900kg;
Carriage length: 3800 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 170 mm; Pre-scorer: yes; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Display saw blade angle: digital; Display cutting height: digital; Display width stop: digital; Display of cut-to-length ruler: digital; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7 kW; Engine braking: yes / automatic; Suction connection: 80mm and 120mm; Machine length: 4000mm; Machine width: 2000mm; Weight: 1000kg;
Description: Engine power HP (KW) 3 (2.2) Cast iron flywheel diameter Ø 600 mm Flywheel width 35 mm Cutting width 585 mm Max cutting height 370 mm Band saw width 10 - 35 mm Band saw speed 18 m/sec Worktable dimensions 890 X 6200 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 2,210 mm, weight approx.: 315 kg
Description: Engine power HP (KW) 2 (1.5) Cast iron flywheel diameter 400 mm Flywheel width 25 mm Cutting width 390 mm Max cutting height 280 mm Band saw width 6 - 25 mm Band saw speed 18 m/sec Worktable dimensions 500 X 450 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,900 mm, weight approx.: 160 kg
Description: Motor power HP (KW) 5.5 (4) Cast iron flywheels Ø 800 mm Flywheel width 40 mm Cutting width 785 mm Maximum cutting height 500 mm Band saw width 10 ÷ 45 mm Band saw speed 25 m/sec Worktable dimensions 1130 X 800 mm Approx. Onsite Dimension. (l x w x h): 900 x 1,200 x 2,500 mm, weight approx.: 600 kg
Description: Motor power HP (KW) 3 (2.2) Cast iron flywheels Ø 600 mm Flywheel width 35 mm Cutting width 585 mm Maximum cutting height 370 mm Band saw width 10 ÷ 35 mm Band saw speed 18 m/sec Worktable dimensions 890 X 6200 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 2,210 mm, weight approx.: 315 kg
cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC CLASSIC 50 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -New machine from our demonstration room, Bj. 2022Pos. 1: Classic 50 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting sp ...
Description: Motor power HP (KW) 4 (3) Cast iron flywheels Ø 700 mm Flywheel width 40 mm Cutting width 670 mm Maximum cutting height 430 mm Band saw width 10 ÷ 40 mm Band saw speed 18 m/sec Worktable dimensions 700 X 930 mm Approx. Onsite Dimension. (l x w x h): 1,260 x 850 x 2,400 mm, weight approx.: 445 kg
Description: Engine power HP (KW) 4 (3) Cast iron flywheel diameter Ø 700 mm Flywheel width 40 mm Cutting width 670 mm Max cutting height 430 mm Band saw width 10 ÷ 40 mm Band saw speed 18 m/sec Worktable dimensions 700 X 930 mm Approx. Onsite Dimension. (l x w x h): 1,260 x 850 x 2,400 mm, weight approx.: 445 kg
Description: Motor power HP (KW) 2 (1.5) Cast iron flywheels Ø 400 mm Flywheel width 25 mm Cutting width 390 mm Maximum cutting height 280 mm Band saw width 6 - 25 mm Band saw speed 18 m/sec Worktable dimensions 500 X 450 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,900 mm, weight approx.: 157 kg
DSB Singlehead NG XM / DSB 350 series Rated power of the main drive 32 kW Connection voltage 3 AC 400V / 50 Hz 3 AC 480V / 60 Hz 3 AC 575V / 60 Hz 3 AC 210V 50 / 60 Hz Max. cutting width 350 mm Band saw blade tension servo-pneumatic Band gear adjustment (band gear visible in the sight glass) Automatic adjustment of the belt run Feed speed, continuously adjustable (depending on Depending on the type of wood and dimension of the block) Standard feed rate: from 4 to 20 m/min Precision feed rate: from 1 to 15 m/min High-speed feed: from 8 to 45 m/min Band saw speed, infinitely adjustable Up to 60 m/s Diameter of band saw guide discs of band saw 915 mm Adjustment of band saw cutting height From 1.7 to 165 mm Band saw blade guide with increased durability Durability Carbon guide Compressed air connection Working pressure 7 bar Water connection 1/2 Cdooj7rci Required su ...
SPECIFICATIONS: Cutting dimensions mm: 4200 x 2050 Saw blade diameter mm: 250 Installed capacity KW: 4.0 Complete with workpiece roll ... mais informação
Striebig Standard III 6220A Disconnecting Machine It is not clean, but it is in perfect condition because we have used it very little here. It has 6 m ... mais informação
Cml PS 600 Band Saw. Band saw in good condition. Located in Italy ... mais informação
Pivoting cross-cut and mitre saw Graule Eisele LMS II with roller support table for wood, aluminum and plastics., cutting height: about 120 mm, cutting width: approx. 80 mm, Roller conveyor length: 350 cm each ... mais informação
The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and swiveling saw blade, digital display and scorer. In addition, the machine has pneumatic hold-down devices for convenient one-person operation., cutting height: tba, cutting length: 3.200 mm, cutting width: 1.300 mm, saw blade ø: 450 mm, engine: 5,5 kW, Vorritzer: 0,75 kW
We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. sliding table saw FORMAT4 Kappa 400 x-motion S/n 605.09.011.16 Year of construction 2016 Manufacturer: Felder Austria Cutting length 2800mm X-Roll sliding table ( 10 years warranty ) Cutting width 1200mm Boom table 1500 mm with cut-to-length fence 3200 mm Cut-to-length fence 3200 mm, swivel 90°–45°, 2 stop jaws Control x-motion CNC engine control with LCD screen 5.7" (145 mm) in overhead control panel Positioning control for saw blade height Positioning control for saw blade angles Automatic cutting height correction when panning Circular saw blade speed indicator Positioning control for rip ...
Professional saw for cutting large materials -cutting width 4200mm -cutting height 95 mm -machine dimensions: width-6450 height-2100 length- 12300 -rear automatic loading -automatic material rotation -associated cuts -air tables 4 pcs -pneumatic disc change 380mm discs pre-cut 180mm -wheels 4500/min -electronic adjustment of cutting and pre-cutting height -optimization program -power of main motor 17,2 KW -total power input 24 kW -400V -year of manufacture 2012 The machine is continuously serviced and the following parts have been replaced: - servomotor of the main disc - servomotor of the pre-cutting - ball screws of the saw unit guide - 4 pcs of frequency converters - Replacement of air handling tables - Replacement of belts, valves, stops, end sensors, cables, cable lines, oil, etc.
- chainsaw REINHARDT NC 800 H ECONOMY LINE _ suction cup JOULIN REINHARDT NC 800 H crosscut saw cutting width 800mm computer for flow optimization saw motor 6.3 kw -blade diameter 500 mm variable feed speed 120m/min max - power 3.5 kw hydraulic power unit 1.5 kw motorized infeed rollers 2x5000mm 2 cutting positions: wide 800mm - narrow 150 mm right or left ejector rollers 2x2500mm total line length 17m VENTOUSE JOULIN 500TS on heavy-duty HEB 260 gantry crane 6.30X6.30M 2 gripping stations machines available