desbastadoras usadas para venda

Planer, dresser, planer with circular sawVEM, ELECTROPLATING LEIPZIGPlaner: Type EH 125max. planing width: 125 mmWorking table: 620 x 125 mmWorking height: 780 mmCircular saw: Type KSmax. cutting fee: 35 mmmax. saw blade diameter: Ø 200 mmwork table: 330 x 240 mmWorking height: 840 - 880 mm (adjustable)Motor: Type ES 1600,45 kW3000 rpm220 V 1AC50 Hzused, tested !Dimensions 660 x 620 x 900 mm

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg  ... mais informação

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Four-sided planer Weinig Profimat 23E Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Operating speed 24m/min Pneumatic clamps for pulling rollers Electric pressure beam adjustment Worktop lubrication system Year of Build: 1998

SPECIFICATIONS: Total length : 2200 mm Width: max. 410 mm 4 planing knives Dressing height: max. 200 mm Installed power 3 KW  ... mais informação

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

High-speed planer and moulder Weinig H30 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the queue and is being prepared for delivery after the order has been placed., working width: 250 mm, working height: 140 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - counter bearing, spindle 2: Right (11kW), spindle 3: Left (11kW), spindle 4: Above (15 kW) – counter bearing, spindle 5: Below (30 kW) - toothed belt drive / counter bearing, feed: 15 kW, control: ATS system, Powered table rollers: Yes

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Four-side planer Weinig Unimat 23E cutting out the glazing bead - German production - year of production 2002 - total power 32 kW - pneumatic stroke of the spindles for cutting the glazing bead - 3866 mth TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - spindle diameter 40 mm - electronic height and width adjustment - the possibility of programming fixed dimensions 1 lower spindle 4 kW 2 left spindle 3 right spindle 7.5 kW 4 right spindle 5.5 kW 5 top spindle 5.5 kW 6 lower spindle 4 kW - power of the feed motor 3 kW - feed speed 5-24 m/min - length of the pre-table 2480 mm - electric brakes - seven upper steel pulling rollers - one upper rubber pulling roller - one roller in the top pulling - air cushion in the countertop - pneumatic pressure - feed on cardan shafts - diameter of connections 140 mm TRANSPORT SIZE 470x220x240 cm  ...

Planing and molding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed Wood or other angled (dressed) workpieces such as MDF or plastic parts. The dressing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (5.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (4 kW) Spindle 4: Down (4 kW) Spindle 5: Uni (4 kW) Working width: 230 mm Working height: 120 mm Dressing table length: 2,000 mm Feed: 2.2 kW // 5-24 m/min, spindles: 5, spindle 1: Right (5.5 kW), spindle 3: Above (4kW), spindle 2: Right / 7.5 kW / 40 mm, spindle 4: Bottom (4kW), spindle 5: Uni (4 kW), working width: 230 mm, working height: 120 mm, feed: 5 - 22 m/min, Dressing table length: 2.000 mm, control: ATS system, table rollers: Driven table roller in the outlet

Four-sided planer SCM P64 Working width 180mm Working height 100mm 4 spindles Spindle arrangement: Bottom 4kw Right/Left 5.5kw Top 4kw Spindle diameter 35mm Two-stage feed: 6-12 m/min Electric height adjustment Adjustable spindles Entrance table length 2300mm Machine dimensions 3300x1200x1600mm

Four-sided planer Weinig Profimat 22N ATS system Working width 220 mm Working height 120 mm Number of spindles: 6 Spindle arrangement: Bottom/Right/Left/Up/Down/Universal Spindle diameter: 40 mm 4 planing heads included Engine power: 1Bottom: 4 kW 2/3 L/P: 5.5kw 4. Top 5.5 kw 5: bottom 4 kW 6 universal : 4 kW ATS System

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L ...

Surface planing machine Kirchner Leipzig or simply surfacer for smoothing and leveling (dressing) of wood Incl. Adjustable angle stop and extensive accessories, working width: 410 mm, knife system: Strip planer knife Z2, engine: 2,2 kW ... mais informação

Motor power 1.25 kW Power consumption 1.8 kW Shaft speed 6700 rpm Weight 93 kg Connection: 400 V / 50 Hz with integrated filter bag for self-suction  ... mais informação

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Flush planer SCM model F410N : - 410x2610mm tops - shaft D.120mm with 4 knives - control panel on rear pine cone Machine according to CE standards.  ... mais informação

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 93 - 160 mmAxial adjustment range: 5  ...

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200