desbastadoras usadas para venda

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Weibert WJ-FS-41 Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min WJ-300200  ... mais informação

FOUR SIDE PLANER machine type MAGIC RECTA 22 second hand machine n.04 spindles with tools (Yes) n.04 separate motors : 1° shaft : surface planer . motor power Hp 4 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 4 4° shaft : thickness planer . motor power Hp 5,5 entry table length mm. 2000 max. useful working width mm. 220 max. useful working height mm. 120 diameter of shaft mm. 40 volt. 380/50 net weight kgs. 1200

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thicknessing table stroke with two speedsNumerical display for working heightThickness table made of cast ironThe thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precisionFour feed speedsOptionally with two rollers in the thickness tableStandard with noise protection and chip protection curtain on the workpiece inlet and outletroller contact pressure adjustableFront feed roller with helical gearPull-out roller with rubber coatingP ...

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: digital display; Feed speed: infinitely variable 5 - 22 m/min; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber 2 x; Table rollers: no; Engine power: 9.2 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Working width: 510 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2800 mm; Dressing table adjustment: lever; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 800 kg;

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2250 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: manually; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: continuous; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 695; Ideal for demanding craftsmen and carpentersThe extra-long dressing tables made of one piece make it easy to dress the workpiecesWork tables are made of grey cast iron, making them insensitive and permanently flatDressing tables to the rear, opening at the same time with tens ...

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: mechanical digital display; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine braking: yes, automatic; Suction connection: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

noise-insulated table lips---------- Technical data ---------- planing width: 400 mm, table length: 2,600 mm, number of knives: 4 pieces; TOP! Workshop-tested & immediately ready for use ... mais informação

Weinig Powermat 500 four-sided planer - year of manufacture 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool mounting TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool mount PowerCom control with upper and left spindle positioning 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1,5 kW 12000 rpm spindle speed 8000 rpm infinitely adjustable feed rate 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber top pulling roller one roller in the countertop pulling airbag in the table automatic central lubrication of the table Automatic lubrication of spindle guides Serving table length 1970 mm nozzle diameter 2x140 mm 3 x 160 mm 1 x 80 mm total power 70 kW 140 A Machine dimensions 500x22 ...

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

CATALOG NO. 6956 TECHNICAL SPECIFICATIONS - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindle) 11kW - spindle 3 electrically adjustable right / left 4) horizontal top 230mm 11kW - 4 electrically adjustable spindle up/down 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable at an angle of 360° 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - from above 5 insertion shafts pulling metal, toothed including 3 double - from above 5 pulling shafts, smooth, rubber including 2 double - from the bottom 2 rubber rollers, pulling - 2 side clamps from the bottom - smooth regulation of feed speed - pneumatically pressed shafts - feed motor 3kW - electrical setting of planing thickness Bvzmbmkp - body lifting ...

Working width: 410 mm; Planer Shaft: Spiral Shaft; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: mechanical digital display; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine braking: yes, automatic; Suction connection: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

Working width: 510 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness indicator: digital display; Feed speed: 5 / 8 / 10 / 16 m/min; Feed roller: steel; Pull-out roller: steel; Pressure beams: Articulated pressure beams; Table rollers: Yes; Engine power: 7 kW; Engine braking: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Working width: 510 mm; Planer shaft: spiral shaft 88 pieces 15 x 15 x 2.5 mm @ 37Â; Dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness indicator: digital display; Feed speed: 5 / 8 / 10 / 16 m/min; Feed roller: steel; Pull-out roller: 2 x rubber; Pressure beams: Articulated pressure beams; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

working width: 630 mm; working height: 280 mm; cutter head: strip knife; number of blades: 4; height adjustment: elektric; read out workpiece thickness: Scala; feed speed: variabel; infeed roller: steel ; outfeed roller: steel; table roller: yes; motor power: 8,8 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 2000kg;

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction