desbastadoras usadas para venda

Code: 0246 Brand: COLOMBO Model: ACS 800 Automatic thickness planer for wood, beams, sawmills, plastics, composites and various materials Working width mm 800 Max thickness to be planed mm 270 Motor Hp 10 Knife shaft rpm 5000 Automatic table lifting N° 2 feed speeds N° 2 rollers on table Overall dimensions mm 1350 x 1150 x 1050 h

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!  ... mais informação

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7  ... mais informação

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -  ... mais informação

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

Specifications/Equipment: Planing width approx. 505 mm Planing height max 250 mm Chip removal max. 8 mm Table length 1,110 mm Electr. Thickness table height adjustment with digital display Thicknessing table guided on 4 spindles Feed speed 7/14 m/min One rubberized feed roller each in the inlet and outlet TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm Motor power 5.5 kW Suction nozzle Ø 160 mm Dimensions: 1,200 x 950 x 1,050 mm Weight approx. 600 kg All information is subject to the actual equipment

Motor power 1.25 kW Power consumption 1.8 kW Shaft speed 6700 rpm Weight 93 kg Connection: 400 V / 50 Hz with integrated filter bag for self-suction  ... mais informação

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg  ... mais informação

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Specifications/Equipment: - Planing width 504 mm - Chip removal max. 8 mm - electr. Thickness table adjustment - One rubberized transport roller each in the inlet and outlet - Spring-loaded articulated pressure beam in the inlet - 4-knife system planer shaft, 510 mm - Variable feed speed 4-16 m/min - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 7.35 kW - Weight: approx. 650 kg

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without an ...

SECOND-HAND 3 SPINDLES MOULDER WEINIG MOD. UNIMAT SUPER 4 - Working width 25-150 MM. - Working thickness 15-50 MM. - Feeding speedy 5/20 M/MIN. - 1st spindle 11 Kw - 2nd spindle 18.5 Kw - 3rd spindle 5.5 Kw  ... mais informação