Fabricante:
(Categoria: 2500)
Description: Volume flow: 320 m³/h Max. static pressure: 21000 PA Rated current: 5.2A Control voltage: 230 V Supply voltage: 230 V Motor power: 1.2 kW Approx. Onsite Dimension. (l x w x h): 600 x 400 x 770 mm, weight approx.: 76 kg ... mais informação
Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Description: KW / A: 13.5 Heater: 19,56 with control cabinet , Appliance dimensions: (LxWxH): 600 x 720 x 1500 mm Control cabinet dimensions: (LxWxH): 600 x 200 x 760 mmApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 1,500 mm, weight approx.: 260 kg ... mais informação
Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg
Atec stainless alginator serial: C10030 - 02 2009, 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid ... mais informação
Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand
This Jeti 5000 Vinyl Printing Machine was manufactured in the year 2009 in Canada. The machine has a psi of 100-150 min-max. ... mais informação
Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar
This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN. ... mais informação
Description: Battery powered manual sweeper. Working capacity up to m²/hour: 2600 Working width with central brush (cm): 50 Working width with side brush (cm): 65 Electric motor (V/W): 12/600 Motor (HP): 0 Type of unloading: manual Collection container capacity (l): 40 Approx. Onsite Dimension. (l x w x h): 1,200 x 700 x 1,200 mm, weight approx.: 29 kg
used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.
Te Koop: Ultra Filtratie in 40 foot container: Type: HWUF 10060 UF/MB/10 Cap. ongeveer 45 M3 / uur. Membranes 10 pieces (2 x 5). Type IMT 10060/UF / MB capillary seven bore. ... mais informação
Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the ...
Description: serial number: A02 belt width: 1400 mm power: 22 kW Approx. Onsite Dimension. (l x w x h): 13,500 x 2,400 x 5,500 mm, weight approx.: 1 kg ... mais informação
Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly
Description: serial number: ,1200023125 working hours: approx. 322 hrs. max. load: 2 persons / ,230 kg max. platform height: 5700 mm  , please also have a look at the videos of this machine serial number: 1,200,023,125, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 2,000 mm, weight approx.: 1,500 kg
Description: serial number: SW-A07Approx. Onsite Dimension. (l x w x h): 3,300 x 1,500 x 900 mm, weight approx.: 350 kg ... mais informação
Description: Collection volume 2000 l, load capacity 3600 kg with even load distributionApprox. Onsite Dimension. (l x w x h): 5,700 x 1,150 x 3,700 mm, weight approx.: 2,000 kg ... mais informação
Description: ABSOLUTE 64 Yacht VESSEL MANUAL Hull Serial Number IT-ABSAM459E010 Registration Office: Viareggio Port Authority Flag: Italian Name: MABI IV Vessel Type: Motor Yacht Length: 18.14 m Width: 5.12 m Persons: 16 Max Load: 1680 kg Engines: 4x AB VOLVO PENTA D6-435 Fuel: DIESEL Cylinders: 6x4 Displacement: 5500x4 Max Power: 320x4 kW Safety Certificate: Expired on 18/11/2023 Maintenance work required for launching, consult the SURVEY for more information The vessel is currently dry docked at Marina di Torre Annunziata Surplex does not offer any loading or transportation services for this item. SECURITY DEPOSIT: For this auction, a deposit of €30,000 is required, which is a necessary condition for the admission to the auction. The deposit does not constitute EARNEST MONEY, therefore it does not constitute an advance on the balance of the winning bid price ATTENTION! This is a ...