máquinas para moldagem por sopro usadas para venda

Container Size With Actual Configuration: 5 l // Number Of Heads: 1  ... mais informação

Container Size With Actual Configuration: 2 l // Number Of Heads: 2  ... mais informação

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1  ... mais informação

Neck: wide mouth // Output: 2000  ... mais informação

Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call  ... mais informação

MACHINE IS ONLY TESTED, DEMO AND IT IS AS BRAND NEW CONDITION. OLEASE LET US KNOW ABOUT YOUR PRODUCT AND WE WILL TELL YOU IF THIS MACHINE WILL FITS FOR YOURS PRODUCTS. MACHINE IS AWAILIBLE IMEDIATELY. WE ORGANIZE DISMANTLING LOADING TRANSPORT WE CAN ORGANIZE WITH FULL RISK INSURANCE FOR THE CUSTOMER.

PET Bottle Blowing Machine Not complicated, damaged, in part. The machine has no electrical installation and many elements are missing. All elements entering the rock of the machine are visible in the pictures. The machine has 10 molds for PET bottles with a capacity of 500 ml with jaws. Ability to get more photos.

Single-station machine for containers up to 5 ltr. DExtruder S 50/20D. Double head 125 mm stitch. PLC control. Clamping force 80 kN. Immediately free  ... mais informação

STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately

SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately

Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

For articles up to 120 ltr. Extruder 120/24D, output up to 500 kg/h. Battery head 12 ltr, nozzle range 160 - 330 mm. New control system installed by Beckhoff in 2020. Clamping force 620 kN. Mould length 1,300 mm, width 900 mm, depth 2x250 mm. Opening up to 1,400 mm. With slug tongs, trimming station, handling robot

unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

Fully electric machine with 2 stations and triple head 225mm stitch. Produced 5 ltr containers in triple cavity, approx. 27 containers per minute. Extruder S 120/24D. Max mould dimensions 735 mm wide and 580 mm high. Max opening 640 mm. Clamping force 190 kN. 460V 60 Huz. B&R control  ... mais informação

PET stretch blow molder with 4 cavities, capacity up to 5,500 bottles per hour at 1 ltr bottle size 2 ltr. Spare parts, blow moulds and neck spare parts can be purchased optionally. The machine was overhauled by Flexblow and various new parts were installed. Siemens control system with English operating language. Machine already dismantled and stored

Manufacturer | manufacturer: Battenfeld Fischer Machine Type | machine type: VK 1-20 Stations | stations: Einstation / Single Year of construction | Built: 1985 Location | Location: Europa/ Europe Clamping force | Clamping force: 180 kN Control Type | control system: Siemens S7 + Beckhoff for WDS & PWDS Extruders | Extruder: 80/20D Extrusion Head | Extrusion Head: S1-120 (Original Battenfeld) Mould dimensions mm | Mold dimensions mm: 480/540/2155 Bottle volume max. | bottle volume max.: 20 L On-Screen Language | monitor language: German/ Deutsch Delivery time | Delivery time: 2-4 weeks

Stretch cart: 1600 mm and width: 200 mm, Bausano brand.  ... mais informação

Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition  ... mais informação

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock  ... mais informação