prensas usadas para venda

This hydraulic baler is specially designed for the production of bales, which have the optimal dimensions, adapted to normal maritime containers. The vertical press with 1 box has a capacity of 2 to 4 bales/hour from 300 to 450 kg depending on material. Attach packaging material As soon as the previous bale is removed from the baler, the operator places a new bale. Packaging material on the lower press plate. The operator brings the press into the Starting position, ready to fill. Filling and pressing cycle The filling of the box is done manually via 2 filling doors. When the press box is full the doors are closed and the press starts the cycle. The Press Plate comes down and compacts the material under the barbs. Next, the press plate rises back up allowing the operator to refill the press can. The number of cycles per bale depends on the quantity and density of the bale.  ...

Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Stock No.: 9859 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg

Vertical baler HSM VL 500.2, built in 2006 Specifications: Manufacturer: HSM Type: VL 500.2 Stock No.: 9858 Year of construction: 2006 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg

Baler Up to 500 kg bale weight depending on the material Weight approx. 750 kg  ... mais informação

pdf description attached  ... mais informação

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Mobile plasticizer for pressing processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulic PN: 150 bar Pn: 16.5 kW P Heating:8 kW 400 V Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use

This press from Fontijne Holland is in machine storage at Plastima Used Machinery. The machine is from 1996 and is in great condition. – Brand: Fontijne Holland B.V. – Model: TP 1000 – Plate size: 500 x 500 mm – Max. pressing force: 1000 kN – Max. hydraulic pressure: 251 bar – Year built: 1996

Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985

Metal press type RETEC for sale in good condition.  ... mais informação

Sell a press for cans and tin containers Make: Becker Pruente Built: 1984 E-engine: 4KW/ 175Bar  ... mais informação

Briquette press for metal granules or shavings or slurries Machine is as good as new, has only 20 bh Hydraulic motor 55 kw Pressing pressure 2000 kg/m2  ... mais informação

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of dru ...

McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.

Pressing pressure 16 tons Specific pressing force 46 N/cm2 Filling opening W 620 x L 1000 mm Bale cross-section W 700 x H 500 mm Bale weight at 1200 mm length (depending on material) up to 90-220 kg Theoretical throughput without oil cooler approx. 62 m3/h Practical throughput without oil cooler approx. 37-43 m3/h Drive power 11kW Weight approx. 4.5 t Born in 1999 Machine No. 29335 / 6607P00648 Colour in RAL RAL9002