prensas usadas para venda

Albamat 550 V5 cardboard press with EKZ 1400 shredderRA2285Type: Albamat 500 V5 / EKZ 1400Year of manufacture: 2019, shredder from 2012Condition: usedOptical: traces of useHeight: Press: 4450 mm without housing, 5550 mm with housingWidth press: 2350 mmDepth press: 5613 mmPressure: 60t / 600 kNRecommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possibleShredder feed opening 1435 x 990 mmMotor power: 22 kW baler, 1.1 & 7.5 kW shredder.Bale size: 1050 x730 x 1200 mm (depending on filling)Cycle time: 25 s, 3.3 t/h at 35 kg/m³Dead weight: 8500 kg baler + 1000 kg shredder + feed hopperStart of baling process: PhotocellBale tying: 5 x 3.1-3.8 mm wire, fully automaticincluding:Oil cooler and oil heater for outside temperaturesFree pusherFeed belt controlPrices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyF ...

Mil-tek waste compactor 205TS 2445 x 745 x 545RA2168Type: 205 TSYear of manufacture: 2009Condition: functionally tested, usedoptical: traces of useHeight: 2445 mmWidth: 745 mmDepth: 545 mmPressure: 2250 kg at 8 barSafety valve: 11 barWaste bale size: 840 x 650 x 415 mmAutomatic bale ejectionOwn weight: 240 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2009Operation / joystick: JA, oben an BedienseiteOperating pressure: 8 BarLength base: 747Transport weight in kg: 240 kgHeight in mm: 2445Breite Basis: 545waste bale size: 840 x 650 x 415 mmPressing force: 2500 kg @ 8 BarFor individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your ...

Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

Briquette diameter: mm 180, Briquette diameter large mm 195, Force main cylinder kN 8,500, Briquette density steel, cast iron Kg/dm 5,5, Briquette density aluminium Kg/dm3 2,4, Briquette density brass, copper Kg/dm3 7.0, Capacity steel/cast iron t/h 7.5, Capacity aluminium t/h 3.5, Capacity brass/copper t/h 8.0, Drive power standard kW 180, Footprint m x m 6.5 x 8.5, Machine weight t 45, Year: 1999, Immediately available, Briquette diameter: mm 180, Year: 1999

Dimensions:, Filling box:, Width: 1000mm, Height: 1000mm, Length: 2400 mm, Average filling length: 1950 mm, Press chamber, Width: 1000mm, Height: 1000mm, Length: 2700 mm, Cylinder forces, Filling pressure cylinder: 980 KN, Intermediate pressure cylinder: 1950 KN, Final pressure cylinder: 1950 KN, Hydraulic drive: 2 x 90 KW, Main drive motors: 2 pieces, Power by motor: 90 KW, Production data, Package cross-section Width: 300 mm, Height: 300mm, Number of parcels per hour approx: 100 to 140, Operating voltage: 400V/50Hz, Hydraulic tank: 3,600 l, Construction year: 1994, Width: 1000 mm, Average filling length: 1950 mm, Length: 2700 mm, Filling pressure cylinder: 980 KN, Length: 2700 mm, Intermediate pressure cylinder: 1950 KN, Final pressure cylinder: 1950 KN, Hydraulic drive: 2 x 90 KW, Main drive motors: 2 pieces, Power by motor: 90 KW, Package cross-section Width: 300 mm, Height: 300 mm,  ...

Technical specifications:, Dimensions of the filling box: Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Dimensions of the press chamber: Width: 1,400 mm, Height: 1,120 mm, Length: 2,750mm, Package cross section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. operating pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t., Fill box dimensions: Width 1,400mm, height: 1.120 mm, Bale chamber dimensions: Width 1,400mm, length: 2.750 mm, package cross section: 300 x 300 mm, drive power: 2 x 90kW, work pressure: 290 bars, Construction year: 1986, mass: about 50 t.

Channel baling press, already dismantled, 11,000kg, Bj. 1985, 35Kw, ready for collection from the Vienna location ... mais informação

with 3 compression chambers, from 30 t to 150 t material quantities per year, vertical, for cardboard, foils, canisters, PET bottles, 200 kN, volume reduction up to 90%, ball weight 250 kg, ... mais informação

Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating  ...

For sale is a complete paper press line consisting of a Lindemann bale breaker / cardboard ripper, type PC 1000/1650, a Lindemann bale press type Bimax 20, including the complete conveyor technology and a Luehr dust extraction system.Technical data baler:Manufacturer LindemannType Bimax 20Pressing force main press 100 tSpecific pressing force 9,91 kg/cm²Pressing force free rammer 24 tonnesChute dimensions 2,000 / 1,400 x 1,060 mmBale dimensions 980 x 1100 mm (h x w), variable lengthDrive power of baler 5 x 22 kWWirbulator drive power 11 kWTying 5-fold vertical, fully automaticThroughput rates with a bulk weight ofbulk density of 20 to 30 kg/cbm approx. 10 - 12 tonnes/hourBulk density from 40 to 60 kg/cbm approx. 18 - 26 tonnes/hourBulk weight from 70 to 100 kg/cbm approx. 28 - 40 tonnes/hourBale weights approx. 650 to 950 kgThroughput volume in single-shift operation in 2021: 15,100 to ...

Technical data baler:Manufacturer Europress Umwelttechnik GmbH, GermanyType EP5 150 V5Year of construction 2015Operating hours 19,173 hoursNumber of pressed bales 282,961 balesNumber of press strokes from the press ram 1,895,112 press strokesPressing force of main press 150 tSpecific pressing force 181.8 N/cm²Dimensions of feed chute 1,000 x 2,000 mm (w x l)Bale dimensions 750 x 1,100 mm (h x w), length variableDrive power 2 x 55 kW + 15 kW + 2 x 0.75 kWRated current 230 ACable cross-section supply 120 mm²Tying 5-fold vertical, fully automaticHydraulic oil tank capacity 4,300 lPLC control Siemens S7 / ET200STransport weight press 35,800 kgSpecial equipment:Base plates and side walls made of HARDOX steelFree tamper in front of the counter blade, with cleaning cycleScope of delivery:1 piece baler1 piece control cabinet1 set of oil collecting pans under the baler1 piece maintenance platfo ...

Technical data baler:Manufacturer unoTech GmbH, Niederlangen, GermanyTyp 120 V5Year of construction 2009Press force main press 100 tonsSpecific press force 145 N/m²Max. cutting force 120 tonsPress force free stamper 25 tonsFeed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 1,5 m³Theoretic throughput rate 650 m³/hourBale size 1,100 x 750 mm (w x h)Driving motor 2 x 75 kWConnected load 160 kWRated current 280 ATying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 20 to 30 kg/cbm up to 15 tons/hourbulk weight of 35 to 50 kg/cbm up to 23 tons/hourbulk weight of 60 kg/cbm up to 27 tons/hourbulk weight of 100 kg/cbm up to 44 tons/hourBale weight 600 up to 900 kg, depends on materialSPS controller (manuf., type) Siemens S7 300Operating panel (manuf., type) Siemens SIMATICTransport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h)Machine weigh ...

Technical data stationary waste compactor with weatherproof operator cabinManufacturer Geesink Kiggen B.V.Type PD 26/20Year of construction 2003Pressing force normal 320 kNPressing force during post-pressing 405 kNTheoretical capacity 350 m³/hour Cycle time approx. 27 seconds Volume bale chamber 2,6 m³Volume per pressing cycle 2.2 m³ Press plunger flow in the container 320 mmDimensions press plunger 740 x 1950 mmFilling opening 1,630 x 1,850 mm (L x W)Standard press opening for container 1250 mmMax. working pressure 330 barVolume hydraulic tank 225 LDrive cable 11 kWConnection cable 5 x 4mm² Installation dimensions 4,300 x 2,495 mmWeight 3.500 kg Comments:We will not assume liability for the given technical data and possible errors.

Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002Operating hours 43,954 hours, stand MarchPress power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 111A1 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replaced here and there.  ...

Technical data baler:Manufacturer LindemannType BIGRO 1020Pressing force main press 100 tSpecific pressing force 12.12 kg/cm²Pressing force free rammer 24 tonnesChute dimensions 1,040 x 1,400/2,000 mmBale dimensions 830 x 1100 mm (h x w), variable lengthDrive power of baler 2 x 55 kWWirbulator drive power 11 kWTying 4-fold vertical, fully automaticThroughput rates with a bulk weight ofbulk density of 20 to 30 kg/cbm approx. 10 tonnes/hourBulk density from 40 to 60 kg/cbm approx. 18 tonnes/hourBulk weight from 70 to 100 kg/cbm approx. 28 tonnes/hourThroughput volume in single-shift operation in 2021: 15,760 tonnesFilling volume of hydraulic oil tank 2,250 litresTransport weight of press approx. 30 tonnesAdditional equipment on the baler:Free rammer in front of the counter blade with 24 t pressing forceHardox base plate, bolted, exchangeableWirbulator, drive power 11 kWCondition of the ba ...

Technical data packing press / can press / metal sheet press:Manufacturer unoTech GmbHType UPAXX 70Year of manufacture 2019Operating hours approx. 3,000 hoursPressing force 700 kN at 315 barFilling opening chute 420 x 1,250 mm (d x w)Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on materialDrive power 30 kWConnected load 40 kWPower consumption, total 70 AThroughput capacity for empty beverage cans with:one pressing stroke approx. 1.7 t/hourtwo pressing strokes approx. 2.5 t/hourAchieved compaction approx. 1200 kg/m³Hydraulic oil tank capacity 850 lPress dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)Transport weight press approx. 9.5 tAccessories:Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355Material properties:According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet off ...

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h)Machine weight baler approx. 40 tonsSc ...

Technical data baler:Manufacturer PresonaType LP 40 EH1 PETYear of construction 1998Operating hours 37,884 hours, data according to operating hours counter, as of MarchNo. of bales pressed 311,714 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 15 kWConnected load, total 18 kWAbsicherung min. 50 A, max. 63 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions ex ...

Technical data baler:Manufacturer BOAType 2040.S.5V.71.37Year of manufacture 2003Operating hours approx. 35,598 hours, as of MarchPressing force main press 71 tSpecific pressing pressure 9.1 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 37 kWTying system 5-fold vertical, fully automaticThroughput rates for quality:B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on materialHydraulic oil tank capacity 800 lTransport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h)Machine weight press approx. 24 tNoise level

Technical data baler:Manufacturer PresonaType LP 40 EH1 Year of construction 1995Operating hours 16,917 hours, data according to operating hours counter, as of MarchNo. of bales pressed 28,745 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 18,5 kWConnected load, total 26 kWAbsicherung min. 62 A, max. 100 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions exc ...