prensas usadas para venda

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113652 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - ...

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2015 Machine no.: 6152.314. Series No.: 460001663 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

automatic baler Manufacturer: PAAL Type: PACOMAT V-80 D Year of construction: 2018 Operating hours: 2,100 h specifications: Pressing force: 82 t Specific pressing force: 97 N/cm² Press pressure: 315 bar Channel format: 750 x 1,100 mm Filling opening: 1,600 x 1,020 mm Binding: 4-fold vertical Drive power: 22 kW Total connected load: 31 kW, 30 A Throughput: - approx. 275 m³/h max. at idle Machine weight: approx. 17 t

Used briquetting press Manufacturer: Höcker Polytechnik Type: C30-12 Year of construction: 02/2003 specifications: Pressing capacity: up to approx. 30 kg/h (depending on material) Hydraulic motor power: 3.0 kW VBriquette diameter: 65 mm Residual moisture: max. 18 % Operating time (without cooler) max. 6-7 h Operating pressure: max. 180 bar Operating temperature hydraulic oil max. 60°C Working environment +5°C to +35 °C Machine weight: approx. 760 kg Container capacity: approx. 0.8 m³ Gearbox agitator: 0.37 kW Space requirement: 1,350 x 1,510 x 1,300 mm (L x W x H) -without pedestal Platform dimensions: 2,350 x 2,550 mm

used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

automatic baling press Manufacturer: WELGER Type: SB 2000L Machine number: 1307 51 321 technical data: Pressing force: 7 t Drive power: 11 kW Bale size 500 x 400 x length in mm Machine weight: approx. 1.9 t  ... mais informação

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

automatic baler Manufacturer: UNOTECH Type: UPAMAT 60 V 5 Year of construction: 2016 Operating hours: approx. 11,500 specifications: Cutting force: 60 t Filling opening 1,400 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Drive power: 37 kW Rated power 70 kW Rated current consumption: 123 A Pump: Axial piston pump Machine weight: 23.500 kg Output: approx. 260 m²/hour under operating conditions Throughput: at 20 - 30 kg/m³ bulk density approx. 7.8 t/h at 30 - 50 kg/m³ bulk density approx. 12.0 t/h at 60 kg/m³ bulk density approx. 15 t Equipped with: Wirbulator 11 kW Press box planked with HARDOX central lubrication point Large digit display Conveyor belt control Free kick 1,300 litre oil tank including chain conveyor Manufacturer: PAAL Type: KEM 1400 Feed length: 6,810 mm Climbing length: 9,000 ...

Replacement Screw for H&G Screw Compressors  ... mais informação

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270  ...

Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2013 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts  ... mais informação

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg  ... mais informação

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t