pré-impressão: fotocompositoras e CTP usadas para venda

M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

PJ.003.0000, CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, 64 Diodes, External Drum, Throughput 17 Plates/Hour At 2540 DPI, With Plate Processor Raptor 85 Thermal, Complete With Software And Dongles, Laser Exposure Time: 211232 Pieces, Total Exposed Plates: 5937 Hours, Complete With Accessories

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

Kodak Achieve 400 PR S-Speed (approx. 16 plates/h) year 2018 with Autoloader  ... mais informação

Kodak Achieve 400 PR S-Speed (approx. 16 plates/h) year 2018 with Autoloader  ... mais informação

Kodak Trendsetter Q400 XPO TDL F-SPD (approx. 43 plates/h) year: 2017 with Autoloader  ... mais informação

( up Thermal CTP AGFA Avalon N8 60 S year 2011 with MAL Processor Stacker 457.000 plates produced  ... mais informação

Ctp Platesetter CRON Model TP RRP 6332 year 2022 Min: size: 450 x 370 mm MAx: 1524 x 1200 mm with Stacker  ... mais informação

VLF Thermal CTP Screen 16000 II year 2008 MAL Sceen 16000 With Plateprocessor Kodak With Platestacker ST 125 SX Horsell Backing oven  ... mais informação

Used Thermal CTP System Heidelberg Topsetter 102 P (2340) ,year 2004 S/N: 044111099 32 diodes Platesize minimum: 450 x 370 mm Platesize max.940x1160mm Exposure time 6,800 h plate winding cycles 93.500 with plate loader Heidelberg 2342 year 2004 with bridge Grafoteam MDT 48C year 2005 with plate delveloper G&J PT 135 year 2005 with stacker Grafoteam PST 48 year 2005 Prinect Meta Dimension RIP Software Prinect Sina Station

8 up Theermal CTP Platesetter Screen 8600 S, Year: 2006 with Trueflow-RIP Only platesetter and RIP for sale  ... mais informação

4 up Ctp System Screen 4600 S year 2017 near 70 plates Loader Stacker  ... mais informação

2 x FUJI Luxel V 9600 for sale for Violet CTP 1 x Luxel V 9600 form year 2005 with Processor Glunz & Jensen CF 126 year 2005 1 x Luxel v9600 form year 2008 with Processor Glunz % Jensen Cf 125 year 2010 both with RIP  ... mais informação

Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.  ... mais informação

CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, Typ PJ.003.0000, Serial No. PJ001632, Age: 2010, Laser Type Gen3 / 160-, with 64 Diodes, External Drum, Throughput 17 Plates/Hour at 2540 dpi, Bacherst Suit Punching Distance 425mm, Plate Format: 240mmx240mm Up To 670mmx 760mm, with Prinect MetaDimension Software (12.0 License Service Dongle), Signa Station: Workstation Monitor Mouse, Laser Exposure Time: 54575 Pieces, Total Exposed Plates: 1325 h, Complete with Accessories, Plate Processing Station: Glunz & Jensen C85 Processor, M-No. 95455-0115, Age: 2010, Advand PST 26 Stacker

Standard  ... mais informação

From original template directly onto plate. fully automatic! The original is exposed via lens system onto a printing-plate roll. Plate is automatically cut and developed - ready for direct use on Rotaprint.  ... mais informação

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)  ... mais informação

Year 2007 model:A52/A74 Incl. plate processor Incl. stacker Located Germany Available: immediately  ... mais informação

Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.