subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 842)
Size: 500 x 750 mmEquipments:Max. pressure: 200 TonsMax. speed: 10.000 sheets / hourThickness of corrugated paper: 80 g / m²Heating temperature: 0 - 199°CHeating zone: 10Max. feeding pile height: 1280 mmDie-cutting precision: ±0.1 mm ... mais informação
Size: 730 x 1040 mmEquipments:Thickness of material: 0,1 - 2 mmDie-cutting precision: ±0.1 mmMax. speed: 7.500 sheets / hourMax. feeding pile height: 1280 mmMax. pressure: 300 Tons ... mais informação
Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar
Max. label dimensions: 2x5.5 inch, max. printing speed: 152/min, weight: 150kg, operational hours counter: 573h. ... mais informação
There are two Domino A400 available, were not used for eight years, with ten printing heads. ... mais informação
Speed: 3-90m/min, with documentation. ... mais informação
Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.
2003 The cutters Max 106 x 76 cm Max sheet size 760 x 1060 mm Min sheet size: 350 x 400 mm Paper 70g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Speed: 12.000 sheets/hour Cutting force: max. 250 T Approx. total weight: 30 T Equipped with: Full APT in feeder and delivery Non-stop feeder PowerRegister with Baumüller drives Micro Centerline Quick lock system in stripping station Quick lock system in blanking station Chase loader Easytransfer device Frame changer Antistatic for paper Data management unit Extra side blow system Krifft & Zipsner logistic system Machine got a overhauling from Bobst (power register, cooling, lubrication and logistics for 120.000 EUR) In production Available: immediately Located: Germany
HEIDELBERG CYLINDER S -Max paper size 54x72 cms. -Serial n. 9041 -Complete with ink unit and rollers -New electric cabin with electronic speed control installed ( Inverter ) -Used for die cutting, 2 frames, all accessories -Excellent conditions ... mais informação
RABOLINI IMPERIA D -Manual hand fed die cutter, year 1988, totally refurbished in 2024 -Mechanical clutch converted into Pneumatic air system clutch -Max paper size 85x120 cms. -Timer for the speed control -Four spare frames and one spare plate ( total of 5 frames and 2 plates ), all tools and accessories -Very nice conditions, available immediately -Any test is possible in our warehouse also by videocall
automatic calendar punch with non-stop feeder, box delivery with vibrator, various punching tools for calendars, etc. ... mais informação
Heidelberg KS, Year 1958 380x520 mm (14.9x20.5") Standard used for die-cutting Available: at short term ... mais informação
Heidelberg SBG, age 1963 540x770 mm (21x30") Die-cutting Available: at short term ... mais informação
Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour ... mais informação
Mabeg Non-Stop Feeder, Stripping Device, 100-2000 g/m2, Max. 6500 Strokes Per Hour, 320 Tons Cutting Pressure, Format: Max. 800x1120mm, Min. 500x360mm, Standard Accessories ... mais informação
Bahmüller & Göpfert, • BGM Caseline 16/32, • year: 1988, • 2 colour flexo, • slotter with robot setting, • Rotary punch, • Folding machine with vacuum transport, • Tape adhesive from Neubronner (Tapen), • Stitching machine from Bahmüller (Stitchen), • Counting and alignment station, • Transfer station to the bundling machine, • Signode bundling machine (year 1994), • Automatic palletizing system from Bahmüller, • Material removal, • Max Size: 1675 x 3200mm, with SkipFeed: 2100 x 3200mm, • Palletizing height: 2, • Cliché height: 7.35mm, • year: 1988, • Max Size: 1675 x 3200mm, • Palletizing height: 2, • Cliché height: 7,35mm
DIE CUTTER OMCSA MARTIA MODEL F -Years 1980 -Hand fed die cutter max paper size 120x83 cms. -Internal die cutting size 117x77 cms. -Mechanical clutch, new motor -Two frames, plates and accessories -In production, available in June ... mais informação
DIE CUTTER HEIDELBERG GT -Max paper size 32x46 cms. -Complete with ink unit and rollers -Two frames, plates and accessories -In production, available immediately ... mais informação