conversão de papel: troqueladoras usadas para venda

electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles,  ... mais informação

Register punch Masch-No.: 52757/6 with printer 2 FA-OR. Cutting length 315 mm, depth 4 mm, max. 40 mm. Cutting thickness max. 7 mm. Clamping thickness: 1-9 books, max. 50 mm. Spine length max. 400 mm. min. Book width: without printer min. 4 mm cutting depth, max. book thickness 10 - 88 mm (with printer up to 95 mm). Connection 220V, 50/60 Hz, compressed air 6 bar, max. Speed 120/ min. Various knife sets

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: BEEK Rotary Punch DFC Die-cutting and creasing for digital printing incl. compressor - Approx. 15 punching plates available - No need for an experienced operator - Professional cutting and creasing results - Operating errors are virtually eliminated due to fixed cutting gap - Safe to use - Very quick set-up, maximum 3 minutes for the stamped part - Little waste, maximum 5 sheets - Long service life of punching plates - Low tooling costs - Printing mark Register Standard - Modular, adaptable design - Tool-free operation - Ergonomically arranged control panel - Solid construction - Maintenance-free On request, we can organize the following points for you: Packaging, loading, transp ...

Size: A4 ... mais informação

cutting and hot foil stamping machine NB of Heating Zones: 6 NB of Pull Programs: 3  ... mais informação

HEIDELBERG OHT SNR: 133501N YEAR: 1961 SIZE: 26 X 38 CM EQUIPMENT: CHASES (2) - HEIDELBERG PRINT-AUTOPLATEN - SHEET FORMATS MIN 40X70MM / MAX 260X380MM - PRINT-/ CUTTING FORMAT MAX 260X350MM - MAX SPEED = 5.500 SPH - EQUIPPED WITH INK UNIT - OIL DRIP TRAY - WEIGHT = 1.100 KG - W168 X D124 X H158CM - 380V/400V - 50HZ - 1.3 KW

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

Foil stamping - embossing Make Gierlich Model P4000 Year 1987 Size of the heating plate 200 x 300 mm Size of the shuttle table 330 x 450 mm Foil transport automatic by each cycle Pressure up to 4 tons Details automatic foil transport (adjustable foil pull) adjustable temperature, adjustable pressure, incl several fonts for foilstamping Condition excellent Available direct

Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct  ... mais informação

Heidelberg KSB, Year 1969 400x570 mm (15.7x22.5") used for die-cutting Standard Available: at short term  ... mais informação

Table punching machine Renz DTP 340; good condition; cleaned and tested; Tool 2:1 rectangular 5.5x3.5mm; Format max.340mm; Punching thickness max.3.5mm. Desktop punching machine Renz DTP 340; good condition; cleaned and checked; tool 2:1 oblong 5.5x3.5mm; size max.340mm; Punching Thikness max.3,5mm.

Bobst SP 142 E,, Year 1978, Max.Size: 1420x1020 mm, Min.Size: 700 x 500 mm, Max.cutting force: 600 T, Feeder: Non-Stop, Centerline, Quicklocksystem, Location in Germany ... mais informação

Heidelberg KSB, Year 1964 400x570 mm (15.7x22.5") Standard used for die-cutting Available: at short term  ... mais informação

Year of construction 1962 manual hot stamping press Hot foil stamping machine Foil reel Underframe 2 side tables Price on request. We deliver and install worldwide!  ... mais informação

Year of construction: 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 Slide preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Bobst SP 142 E year: 1978 Max speed: 6500 sh/h Max Size: 1020x1420mm Minimum Size: 500x700mm ... mais informação

ENKO Year: 2014 Model: EA 2200 STFT Technical Specification of Standard Machine Suitable for the following materials: Solid Board - up to 300gsm Automatic Top Feeder - up to 500 g/m² Corrugated and laminated Corrugated - 0.5 - 12mm Cabability specifications Sheet size: max. 2200 x 1700 mm min. 700s 500mm Cutting pressure: max. 440t Max. number of strokes: max. 2200 s/h Dimensions and Weights Length of machine: approx. 9400mm Width of machine without platform : approx. 3285mm Height of machine: approx. 2815mm Weight of machine: approx. 45t Pile height Delivery with 300mm elevation max.1600mm TechnicalData Gripper edge margin, adjustable from 10 - 18 mm Cutting knife height: 23.8 mm, Year: 2014, model: EA 2200 STFT, Cutting pressure: max. 440t

Platen with Hotstamping  ... mais informação

With Steuer Hot Foil Stamping System, Fully Automatic, Speed Control, Central Lubrication  ... mais informação

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!  ... mais informação