| Description: |
Sheet metal deburring machine GECAM G 135 RB8
new machine
: neu
: ca. 12 Wochen ab Auftrags
: Italien
: 145200
€
: 2889.48 €
: 1350 mm
: 0,4 - 120 mm
: 1370 x
2200 mm
: 6000 m³/h
: 150 mm
: 6 bar
: 4200 mm
:
2300 mm
: 2350 mm
: 4200 kg
WITH 2 WORKING STATIONS: 1 X
GRINDING BELT UND 1 X BRUSH UNIT ON TOP
Machine made of
stress-free welded steel construction for stable and rigid
structure
Work table with motorised height adjustment via 4
synchronised spindles.
Independent drive motors for each work
group.
Hoods for extraction inside the machine, one per
station.
Touch screen for:
Automatic star-delta
connection of the main motors
Digital display for sheet
thickness with decimal point tolerance
Material thickness
adjustment (+/- 0.1 mm)
Machine condition monitoring with alarm
messages
FEEDING SYSTEM
Robust steel structure,
wear-resistant surface.
Vacuum conveyor belt on request
The table raises and lowers from 780 mm to a maximum height of 950 mm
above the floor. The power of the motor for height adjustment of the
table is 0.25 kW.
Maximum permissible weight on the table: 140
kg.
Variable feed speed via frequency converter 0,4 to 4,5
m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min.
Rubber
conveyor belt, oil and temperature resistant.
Lateral guides to
prevent the belt from lifting off.
Rubber pressure rollers in
front and behind each station, oil and temperature resistant.
Automatic centring device for the conveyor belt
Automatic servo
cooled motor
Speed motor on the main touch screen
1 TH
R GROUP DEBURRING WITH ABRASIVE BELT
Rectified and balanced
contact roller with 180 mm diameter. Coating of oil and heat resistant
nitrile rubber. Standard roller hardness 55° shores. Mounted on an
eccentric shaft that allows to control the working position and
compensate the abrasive belt wear, with a range of 8 mm. This system
is controlled by a pneumatic cylinder that allows the automatic
insertion of the group into the work and, in case of emergency and/or
machine stop, the immediate removal of the sanding belt from the
working point. It is possible to insert sanding belts and/or Scotch
Brite.
Pneumatic on-off switch.
Roller adjustment up-down
",grain", stroke 10 mm
Variable speed motor 11 kW with
automatic braking in case of emergency.
Rotation speed in feed
direction 4 - 18 m/s.
Width and duration of the oscillation
setting.
Pneumatic tensioning system for the abrasive belt.
Sanding belt centring system, with electronic photocell, Oscillation
adjustment in width and time.
2ND GROUP ROTATING BRUSH
UNIT
2 rows of vertical brushes, 4 rotating clockwise and 4
counterclockwise.
Each brush has a diameter of 350 mm and a
length of 530 mm.
Motorised raising and lowering of the group to
regulate the pressure of the deburring.
Variable speed motor 1,5
kW.
Variable speed group electronic inverter 6 - 12 U/min.
Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to
900 U/min.
Speed programmable control and display on the
electronic touch screen.
CONTROL OF THE THICKNESS AND THE
BRUSHES
Motorised table lifting with fine adjustment via 4
precision screws with ball bearings
Maximum H51606 operating
pressure 120 mm
Pressure motor power kW 0,75
Pressure
adjustment via touchscreen
CONVEYOR BELT CLEANING
Brush
system in nylon canvas for cleaning the conveyor belt (length 1350, Ø
=150 mm), located at the back of the machine under the table, with a
motor power of 0.12 kW. The brush rotates against the rotation of the
conveyor belt and removes the dust remaining on the belt and in the
holes of the vacuum system. It is very important to keep the holes
clean to maintain the maximum capacity of the vacuum.
VACUUM
SYSTEM
Perforated and slotted conveyor belt and table
Vacuum fan motor inside the machine, Power 4,0 kW
Automatic
start of the time lapse
Double inlet pipework (left and right)
of the table
Sound insulation system for vacuum blowers through
special low-noise material and silencers
ELECTRONIC
CONTROL
Electronic ControlPLC-Touchscreen 10",
Automatic start of the sequence programme
Control of layer
thickness
Software-Help
Feed control
Speed
monitoring
Automatic alarm notification and reset
THE
MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN
EXTRACTION SYSTEM WITH 6,000
M³/H.
OPTION:
Service-Remote-Device €
1.380,--
The data for this ad was created with
ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1069-1938
|