used RÖHM for sale

Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking

very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...

New planboard Roehm 600 mm Direct recording Camlock - 8

Electric - Hydr.- Machine Vice Offer number: 50105 Make: RÃ?HM Type: 744 - 05 Machine No: xxxx Built: approx. 1993 Technical data: - Electric - Hydr. Machine vice - with separate hydraulic unit - and E. foot buttons for opening and - close the clamping jaws. - Jaw width 200 mm - Jaw height 75 mm - Clamping range approx. 0 - 350 mm - Guide track height approx. 100 mm - Total height 185 mm - separate hydraulic unit röHM , type HA 707 - 80 - Start 400 V / 0.37 kW - Weight approx. 100 Kg - Space requirement approx. L to 850 x W 280 x H 185 mm

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !

Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg

Stock Number: 3806 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 151953 0004 P, Year of manufacture: 0 Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 kg

Prism jaw, 125mm wide for clamping round parts, type 1, D4-20mm, and 2x D6-40mm, Type 2, D4-20mm and D9-62mm

diameter:310 mm weight of the machine ca.:0,03 t bore:65 mm

faceplate diameter:620 mm weight of the machine ca.:0,15 t Bore:130 mm

faceplate diameter:500 mm weight of the machine ca.:0,1 t 4-jaw faceplate for studs and locknut

Description: Additional information: - Manually operated, - as a range of clamping mandrels for different clamping diameters, - with clamping sleeve, technical features (hardened, low-wear version / MZE), area of application: - internal clamping of round workpieces. - measuring operations and light grinding operations. - ideal for large clamping lengths or long workpieces. Advantages: - Tool-free quick change of the clamping sleeve, - High concentricity and repeatability, - High flexibility thanks to mounting on the shaft or between centers, - Short changeover times, Contents in a storage box Quantity = 5 pieces: - Basic mandrel MZE, size 2, with centering hole, for internal clamping No. 315002 - Basic mandrel MZE, size 3, with centering hole, for internal clamping No. 315003 - Basic mandrel MZE, size 4, with centering hole, for internal clamping No. 315004 - Basic mandrel MZE, size 5, w ...

Description: . Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg

Description: Jaw width: 160 mm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 160 mm, weight approx.: 80 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 550 x 200 x 150 mm, weight approx.: 70 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 550 x 200 x 150 mm, weight approx.: 70 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 430 x 140 x 140 mm, weight approx.: 70 kg

Description: Jaw width: 10 mm Approx. Onsite Dimension. (l x w x h): 380 x 160 x 140 mm, weight approx.: 50 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 600 x 150 x 150 mm, weight approx.: 70 kg

Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck, three-jaw lathe chuck, face spiral chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 380 mm -Passage: Ø 115 mm -Holder: M230 x 4 / cone 125 - 147 mm -Weight: 92kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Single and complete jaws: adjustable -Bajonet: short cone flange, cone size 6, bolt circle 133.4 mm -Passage: Ø 55 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -Manufacturer: Rohm, revolving center point with draw-off nut -Type: size 486 -Recording: MK6 -Dimension: Ø 155 x 360 mm -Weight: 13 kg

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

revolving tip, revolving center point, revolving Morse taper, revolving -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -hydraulic voltage defective -is sold as dismanteld -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 170 mm -Height support: 80 mm -Weight: 62 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK3 -9x: sleeve MT1 -7x: sleeve MT2 -4x: sleeve MT3 -Thread recordings: 3 -Weight: 16.8 kg

Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: 65 mm -Span width: max. 345 mm -Dimensions: 730/300/H170 mm -Weight: 125 kg

Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x centering points available -Price: per piece -Weight: 8 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 220 mm -Bolt circle: Ø 134 mm -Hole: short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg