Operating pressure: -1 to 32bar, operating temperature: -50 to 100°C, test pressure: 35.2bar.
Volume flow: 7.8m³/h, rotational speed: 2935/min, power: 55.3kW, length: 2350mm, width: 970mm, height: 1950mm, weight: 1,275t, operational hours counter: 37,429h, an inspection is possible.
Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible.
Volume flow: 5850l/min, rotational speed: 5750/min, motor power: 37kW, length: 2000mm, width: 900mm, height: 1250mm, weight: 830kg, with documentation, an inspection is possible, has been out of service since 2011, until this date it ran without any problems.
There are two identical chillers available, refrigerant: R407C, on-site inspection is possible, have already been dismantled.
Cooling output: 36.2kW, operating temperature: 50°C, weight: 1.57t, an inspection is possible.
Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible.
Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.
Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.
Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.
Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.
Volume flow: 15m³/min, motor speed: 3000/min, connected load: 75kW, weight: 1.534t, with documentation, an on-site inspection is possible.
Max. operating pressure: 3.5bar, max. rotational speed: 2980/min, connected load: 73 kW, an on-site inspection is possible.
Compressor is fully functional with run: 44621h and load: 22249h. Approximately 20 years old, but always serviced by a Kaeser service center.
Cooling output: 11,000W, max. operational pressure: 30bar, connected load: 6.5kW, an inspection is possible.
Rated power: 400kVA, rated frequency: 50Hz, max. short-circuit duration: 2s, switching group: Dyn 5, cooling: ONAN. Total weight: 1350kg, oil weight: 310kg. Including an oil drip tray.
A complete ventilation system used in food production is available. The system consists of 2 main parts: (1) WK-WD 101 and (2) WK-W 41. Air flow capacity (1)/(2): 8000/1500 m³/h, external pressure (1)/(2): 500 Pa/350 Pa. Fan type (1)/(2): THLZ 400/ER35F-2DN.C5.1R, filter (1)/(2): TK G4 7.3 m² / TK G4 2.5 m². Sound level (1)/(2): 86.5 dB / 71.7 dB. Additional for (1): Heat recovery unit diagonal flow, frost protection thermostat up to 200°C. Additionally for (2): Cooler-evaporator, Danfoss VLT 6003 HVAC, silencer baffle. Documentation available.
Electrical output: 5.5kW, thermal output: 14.8kW, power consumption: 20.5kW. Max. Flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66773, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.
Combined heat and power unit has been converted for continuous operation. Output: 225kW at 1500 rpm. Fuels: diesel/fuel oil.