tornos usadas para venda

Thread cutting gear Pick-up device partially revised  ... mais informação

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

faceplate diameter: 1250 mmswing diameter: 1650 mmturning height: 950 mmram head dimension: 200x200 mmcontrol: Heidenhain type: Manuel Plus 410total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mmswing diameter: 2100 mmturning height: 1700 mmControl: R & D type: MTC 4 turning speeds: 280 U/minworkpiece weight: 20000 kgTool changer: 14 Pos.: total power requirement: kWweight of the machine ca.: 2800 tdimensions of the machine ca.: 3,7x3,75x5,1 mMachine is modernizedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmcentre height: 155 mmcentre distance: 800 mmspindle bore: 38 mmspindle turning speed range: 24 - 2800 U/minspindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/Ufeeds - cross: 0,013 - 0,628 mm/Udia. of leadscrew: 24 mmlead of leadscrew: 6 mmtailstock taper MT: 3 tailstock quill stroke: 110 mmtotal power requirement: 3 kWweight of the machine ca.: 800 kgdimensions of machine L x W x H: 1,80 x 0,70 x 1,23 mAccessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmspindle bore: 38 mmtailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/minlinear traverse of table: 0,026 - 1,253 mmfeeds crossrail-slide horizontal: 0,013 - 0,628 mm/Uquill stroke: 120 mmtotal power requirement: 2,4 / 3,0 kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 1,85 x 0,8 x 1,7 m3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Equipped with : - 6 Chucks Ø 130 - 2 Jaws - Hydraulic clamping - Electro-magnetic clutch - Spindle stopping system - Spindle indexing - Threading attachment independant station N °5 - Chip conveyor Stock : 5520Approx. Onsite Dimension. (l x w x h): 4,900 x 1,500 x 2,300 mm, weight approx.: 8,000 kg

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Attention: The machine is only available from 01.07. and can only be taken over from this date. Including additional 3-jaw chuck, chip conveyor, tailstock  , Attention: without tools and the chuck on the machine, technical specifications without guaranteeturning diameter: 500 mm, serial number: W 19604, x-motion: 300 mm, z-motion: 750 mm, control: SIEMENS SINUMERIK 810 T, toolchanger positions: 10, total power requirement: 54 kW, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,300 mm

High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Description: Machine number: 31671 Point width: 760 mm Three-jaw chuck diameter: 250 mm Bar passage: 25 mm Turning diameter: Over bed: 800 mm Above carriage: 660 mm Speed range: 45 - 2000 rpm Including: further accessories (see photos)Approx. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 1,400 mm, weight approx.: 3,500 kg

Ref. -No.: 10257Manufacturer: HEIDENREICH & HARBECKYear of construction: 1981Type of control: KonventionellStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPMMachine length: 2.900 mmMachine width: 1.200 mmMachine Height: 1.800 mmWeight Of The Machine Ca.: 3,5 tTool holder type: Multifix Typ B Turning Length: 1.000 mmTurning Diameter Over Bed: 480 mmTurning Diameter Over Slide Rest: 295 mmBezel diameter (inside): 1 x 145, 1 x 255 mm

Multi-edge lathe Multi-edge lathe Manufacturer: Hahn + Kolb Type: TORNOMAT 2 Year of construction: 1981 Working range 6-edge: 3 – 36 SW mm Working range 4-edge: 3 – 24 SW mm Maximum turning length: 60 mm hydraulic feed per revolution: 0 – 0.5 mm Rotor speed: 250 / 335 / 450 rpm. Hydraulic pump: 23 l /min. Pressure hydraulic system max.: 45 bar Oil filling 36 cSt/50° C: 125 liters Motor for lubrication pump: 1000 min. -1 Weight without accessories: approx. 1300 kg Space requirement without control cabinet: 1530 x 670 mm Accessories: Collets Knife head

 ... mais informação

 ... mais informação

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm  ... mais informação

Screw-cutter Lathe Ryazan 1M63(Russia), 1981, work piece maximum diameter above bed 630 mm; work piece maximum length 2800 mm. price 5200 EUR.  ... mais informação

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m  ... mais informação