mandriladoras e centros de usinagem usadas para venda

Description: The DIXI DHP 80 High Precision Horizontal Machining Centre with four axes was used exclusively for the finest machining processes and has never produced rougher chips. A fresh geometric adjustment was carried out in November 2023. Control system Control system: SIEMENS Sinumerik 840D Linear axes Traverse path X/Y/Z axis: 1,200/1,100/1,100 mm , Y distance pallet to spindle (min. - max.): 40 - 1,140 mm Z distance from pallet centre to spindle (min. - max.): 230 - 1,320 mm Work feed: 0 - 10,000 mm/min Rapid traverse: 40,000 mm/min B-axis Table indexing angle min.: 0.0001° Feed rate: 0-10 rpm Max. torque (continuous, nominal torque): 1,040 - 1,828 Nm Spindle with internal coolant supply Nominal spindle motor power: 39 kW Spindle speed max.: 12,000 rpm Spindle holder: HSK A-100 Coolant supply with 70 bar and 20 l/min Automatic FASTEMS pallet changer Pallet storag ...

x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D tool change unit:25 fachtaper ISO:SK 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:18 kVAweight of the machine ca.:4,1 t5 axis simultaneously milling-drilling machining center,NC-rotary-swivelling table,direct measuring system,airblast outside,el. handwheel,no internal Coolant Supply,no chipconveyor,Approx. 37.000 hours "machine on", approx. 11.600 hours "spindle on"

Description: serial number: 980212965 control: YASNAC J300M working hours: approx. 1788 hrs.  , travels: X-axis: 500 mm Y-axis: 470 mm Z-axis: 450 mm rapid traverse: X-axis: 24 m/min. Y-axis: 24 m/min. Z-axis: 24 m/min  , spindle speed range: 15000 rpm spindle ,power: 15 kW  , number of pallets: 11 pallet size: 300 x 300 mm  , toolholder: BT40 toolchanger positions: 180  , please also have a look at the videos and the PDF documents of this machine z-motion: 450 mm, x-motion: 500 mm, y-motion: 470 mm, control: YASNAC J300M, pallet table size: 300 x 300 mm, numbers of pallets: 11, taper: BT40, power capacity - spindle: 15 kW, toolchanger positions: 180, turning speed range: 15,000 rpm, rapid motion: 24 m/min, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 5,300 x 4,400 x 2,700 mm

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"

Description: control: SIEMENS Sinumerik 828D  , travels: X-axis: 650 mm Y-axis: 650 mm Z-axis: 800 mm rapid traverse: X-axis: 60 m/min. Y-axis: 60 m/min. Z-axis: 60 m/min. rotational speed B-axis: 50 rpm  , spindle speed range: 17500 rpm spindle torque: 60 ,- 80 Nm spindle power: 26 - ,35 kW  , max. workpiece diameter: 800 mm max workpiece height: 800 mm max. workpiece weight: 800 kg  , toolholder: HSK-A 63 toolchanger ,positions: 40 max. tool length: 450 mm max. tool diameter: 160 mm max. tool weight: 10 kg  , please also have a look at the videos and the PDF documents of this machine z-motion: 800 mm, max. workpiece weight between centers: 800 kg, x-motion: 650 mm, y-motion: 650 mm, control: SIEMENS Sinumerik 828D, taper: HSK-A 63, power capacity - spindle: 26 - 35 kW, spindle torque: 60 - 80 Nm, toolchanger positions: 40, turning speed  ...

Description: The machine package offered here consists of two well-maintained STARRAG HECKERT HEC 500D XXL Horizontal Machining Centres and a Flexible Loading System for 20 workpiece pallets from the renowned manufacturer FASTEMS. FASTEMS Loading system Type: FPC-1000 Number of pallet spaces: 20 ,(10 top row & 10 bottom row) Number of set-up stations: 1 Number of machine connections: 2 Loading system dimensions (L x W x H) approx.: 14800 x 3767 x 4150 mm Max. loading capacity incl. pallet: 1000 kg Max. pallet loading dimensions (L x W x H): 950 x 950 x 1000 mm / Ø 1000 mm Horizontal Machining Centre (data per machine) Control and Machine numbers Control: SIEMENS Sinumerik 840 D Machine numbers: 16334 / 16335 Working area Number of simultaneous axes: 4 Pallet size: 500 x 630 mm Workpiece weight approx.: 800 kg Workpiece dimensions approx. (L x W x H) 950 x 950 x 844 mm / Ø 1 ...

x-travel:1800 mmy-travel:2000 mmz-travel:1100 mmpallet table size:1850 mmtable turning speeds:max. 200 1/mintable load capacity:3000 kgtool taper:HSK 100 spindle drive:44 / 32 kWturning speed range - stepless:10000 1/minnumbers of positions in the tool changer:120 control:840D powerline FD shopmill classic SIEMENStransport dimensions LxWxH:6,1 x 3,4 x 3,8 mweight of the machine ca.:37 t5-axis CNC universal mill-turning center, simultaneously,NC-mill-rotary table with pallet-device dia. 1.850mm,linear pallet pool for 2 pallets,Universal milling head with controlled B-axis,mode 43D probe infrared HEIDENHAIN TS 640,BLUM-laser,internal coolant Supply 40bar, 980 l, with temperature control,internal airblast,SinTDI tooling management,TRANSMIT function,DMG netservice,flushgun,higher accuracy device,torque support for angle milling tools,tooling breakage control,chipconveyor,approx. 131.000h "ma ...

Description: Basic Machine Universal machining centre DMU 60eVo New DMG MORI Design traverse path X/Y/Z 600/500/500 mm / X/Y/Z 23.6/19.6/19.6 in motorspindle speedMASTER® SK 40/BBT speed range 20 - 18.000 min-1 SK40 speed range 18.000 - 20.000 min-1 SK40-BIG PLUS® 35 kW (40% ED), 25 kW (100% ED) 46.9 hp (40% DC), 33.5 hp (100% DC) tool taper SK40 (DIN ISO 7388-1-A, AD) for Pull-Studs DIN ISO 7388-3-A, AD NC swivel rotary table chain type tool changer with 30 positions and double gripper active cooling direct measuring system full cabin Swarf conveyor (scraper type), spray gun MPC (Machine Protection Control) 3D-Control, ERGOline® control Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Control CELOS with Siemens 840D sl Operate includes 21,5 ERGOline® Cont ...

Description: Machine number: H-H30608 Operating voltage: 400 V Frequency: 50 Hz Connection: 25 kVA Control system: HURCO WINMAX Travel distances: X: 700 mm Y: 500 mm Z: 600 mm Tool holder: SK 40 Table dimensions: 1000 x 510 mm With 5 grooves With 24-position tool changer Spindle speed: 15000 rpm Attention: the machine vices on the clamping surface are not included in the scope of delivery Incl. chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,300 x 2,400 mm

Description: Machine number: H-420468 Operating voltage: 400 V Frequency: 50 Hz Connection: 15.0 kVA Control system: HURCO ULTIMAX Travel distances: X: 1060 mm Y: 610 mm Z: 610 mm Spindle speed: 10000 rpm With 24-position tool changer Tool holder: SK 40 Table dimensions: 1270 x 610 mm With 5 grooves Attention: the vices and magnetic chucks on the clamping surface are not included in the scope of delivery The machine is equipped with a chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,700 mm

Description: Serial number: H-H41129 Operating voltage: 400 V Frequency: 50 Hz Connection: 30 kVA Control system: HURCO WINMAX Travel distances: X: 1060 mm Y: 610 mm Z: 610 mm  , Spindle speed: 10000 rpm With 24-position tool changer Tool holder: SK 40 Table dimensions: 1270 x 610 mm With 5 grooves With 40-position tool changer Spindle speed: 15000 rpm Attention: the vices and magnetic chucks on the clamping surface are not included in the scope of delivery The machine is equipped with a chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,700 mm

Description: Machine number: H-H30801 Operating voltage: 400 V Frequency: 50 Hz Connection: 25 kVA Control system: HURCO WINMAX Travel distances: X: 700 mm Y: 500 mm Z: 600 mm Tool holder: SK 40 Table dimensions: 1000 x 510 mm With 5 grooves With 24-position tool changer Spindle speed: 15000 rpm Attention: the machine vices on the clamping surface are not included in the scope of delivery Incl. chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,300 x 2,400 mm

x-travel:2600 mmy-travel:700 mmz-travel:700 mmtable surface area:2900 x 700 mmrotary table diameter:750 mmtable load:500 kgcontrol:HEIDENHAIN iTNC 640 turning speeds:20 - 15.000 1/mintaper ISO:SK 40 tool change unit:120 Pos.rapid traverse:40 m/minspindle:23,5 / 13,5 kWtotal connected load:56 kVAweight of the machine ca.:16 tdimensions of the machine ca.:6,0 x 3,4 x 3,0 m5-axis simultaneously universal machining center,installation date 6th December 2018rigid table with integrated NC-rotary table (left) and B-axis in milling head,direct measuring system,Swarf Conveyer,3D Touch probe HEIDENHAIN TS 649,el. handwheel,internal coolant supply 40 bar,Flush gun,mode 4,safety device (for power failure),ERGOLINE control 19"reading hours:approx. 25.500 h "machine on"approx. 7.500 h "program on"approx. 8.100 h "spindle on"

Description: SPECIFICATIONS Character: Deckel Maho Type: DMU 60T Control: Heidenhain MillPlus Year of construction: 2001 Table dimensions: 1,000 x 600 mm Displacement: X= 630 mm, Y= 560 mm, Z= 560 mm Top name spindle: HSK 63 Maximum speed: 12,000 rpm Maximum table load: 400 kg Clamping conveyor Machine dimensions: 3,000 x 2,000 x 2,150 mm Machine weight: 7,000 kg Positions in tool magazine: 24weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,150 mm

Description: Sourced from an automotive manufacturer due to production changes Serial Number: 109303 Control: Siemens Sinumerik 840 DSL ( composed of 15 NC and 4 spindles) ,  ,Machine-specific plain text messages on screen in German language This  ,machine centre is composed as follows: , 2 Centric clamping divices Actuation: , Hydraulic Swivel table: 180º Hydraulic pressure:  ,approx max 100 bar Station 1 (front) , Spindle units: 2 SEMA spindle units type SE55 - HSK 50 for deburring Spindle Bearing inside diameter: 55 mm Sealing with barrier air and labyrinth Tool holder: HSK50 Drive power: 1,5kw at 3000 u/min Tool cooling Dry machining Drive direct via coupling Manual tool change 2 pcs. 4 spindle head for thread forming 4xm10 with IK and ABS tool holder Drive power AC servo motor, 11.0 kW Spindle speed  ,variable: ,max 3500 rpm Coolant inter ...

x-travel:735 mmy-travel:650 mmz-travel:560 mmRotary-table:680 mmtable load capacity:600 kgtool taper:HSK 63 spindle drive:35 / 24 kWturning speed range - stepless:18.000 1/minnumbers of positions in the tool changer:60 Pos.control:SIEMENS 840D solutionline FD operate total connected load:65 kVAtransport dimensions LxWxH:4,0 x 2,45 x 2.85 mspace requirements approx. LxWxH:5,0 x 4,0 x 3,5 mweight of the machine ca.:12 t5-axis CNC universal mill-turning center, simultaneously,NC-mill-rotary table D= 650 mmmm,rotary table 1.000 rpm,mode 4,3D probe infrared HEIDENHAIN TS 649,BLUM-laser,internal coolant Supply 40 bar , 600 l, MPC( machine protection control ), DMG netservice,flushgun 2 bar,chipconveyorapprox. 15.200h "machine on", approx. 4.900h "spindle on"

Description: Control and Machine Number Control: SIEMENS Sinumerik 840 D Machine no.: 14351 Travels and Axes Travel X-axis: 1450 mm Travel Y-axis: 1100 mm Travel Z-axis: 1300 mm B - axis: NC rotary table Pallet dimensions & Pallet changer Number of pallet places: 2 , Pallet dimensions: 1000 x 800 mm Feeds & Spindle Rapid feed X,Y,Z: 60 m/min Working feed: 1- 60000 mm/min Feed force max. X|Y|Z : 20|18|20 kN Spindle speed: 20 - 6000 rpm Tools & Tool changer Tool holder: SK 50 Chip to chip time: approx. 5 sec. Tool change places: 180 General data Coolant system Chip conveyor Please have a look at the technical data in PDF format.z-motion: 1,300 mm, change time of pallets: 5 sec, x-motion: 1,450 mm, y-motion: 1,100 mm, control: SIEMENS Sinumerik 840 D, numbers of pallets: 2, taper: SK 50, toolchanger positions: 180, turning speed range: 20 - 6000 rpm, rapid motion: 60 m/min ...

x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine

Description: S/N:12430004323  , Spindle ON approx.: 14.260h Control: Heidenhain iTNC 640 Taper: SK40 Spindle RPM: 18.000 1/min Max. X-axis stroke: 750 mm Max. Y-axis stroke: 650 mm Max. Z-axis stroke: 560 mm Max. workpiece diameter: 630 mm Max. workpiece height: 500 mm Max. workpiece weight: 600 kg Touch probe: HH TS 649 Handwheel Chip conveyor Rotoclean Note: vice not included, tools in the magazine included.z-motion: 560 mm, x-motion: 750 mm, y-motion: 650 mm, control: HEIDENHAIN iTNC 640, taper: SK40, toolchanger positions: 60, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 3,200 x 3,100 mm

x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine