Fabricante:
(Categoria: 101)
spindle diameter: 80 mmx-travel: 1100 mmy-travel: 750 mmz-travel: 1350 mmsurface area: 1000 x 1000 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 5x3x3 m• 3-axis-D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. ... mais informação
Bohrleistung in Stahl (-Ø: 36 mmthroat: 350 mmbore stroke: 180 mmBohrleistung in Guß (-Ø: 45 mmspindle taper: MT: 4 spindle head adjustment: Ý 500 mmtable surface area: 600 x 700 mmfloor plate:: 460 distance work spindle /surface of the table: 80 - 750 mmspindle turning speed range: 0,09 - 0,28 U/minfeeds: 380 mm/WUvoltage: 50 Vpower capacity: 2,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 0,6 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): / mmarm length: / mmworkpiece height max.: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe pallets lying on the machine are not included in the scope of delivery.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition. Working spindle diameter: 80mm Table dimensions: 900x1120mm By prior arrangement, the possibility of a tour in progress. ... mais informação
Drill press, drill press, stand drill, pillar drill-Table size: 400 mm-spindle taper: MK4-Projection: 320 mm-Speeds: 80-700 rpm-Columns: Ø 160 mm-Spindle stroke: 175 mm-VIP transmission-Feed: 0.09-0.28 mm/rev-Tachometer: defective-Dimensions: 1100/500/H1960 mm-Weight: 650 kg ... mais informação
Rotational speed: 90-710/min, connected load: 12kW, can be inspected. ... mais informação
Drilling capacity steel/GG: 40/55 mm Spindle holder: 4 MK Projection: 345 mm Table size: 500 Ø mm Quill stroke: 170 mm Spindle speeds: 80 - 710 rpm Feeds: 0.09/0.16/0.28 mm Drive motor: 380 V, 2.2/2.5 kW Dimensions: 1070 x 500 x 1940 mm Weight: 620 kg ... mais informação
Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg
bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtable surface area: ø 500 mmspindle taper MT: 5 spindle turning speed range: 40 - 800 U/minfeeds: 0,1/0,14/0,2/0,28/0,4 mm/Ucolumn diameter: 220 mmdistance between table/spindle: max. 670 mmdistance spindle/base plate: 1180 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of machine L x W x H: 1,5 x 0,75 x 2,4 mAccessories: drill chuck, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 120 mmx-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmturning speeds: 19-1900 U/mintable-size: 600x1200 mmtable load: 2000 kgspindle taper ISO: 50 : Feed: 0,042-1,46 mm/Uweight of the machine ca.: . tdimensions of the machine ca.: . mTool holder: Steep taper No. 50 Din 2080 3.5The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg ... mais informação
Bench drill, bench drill, column drill, pillar drill - Recording: MK2 -Projection: 260 mm -Travel: 190 mm -Speeds: 435 - 4350 rpm - Column diameter: 80 mm -Spindle stroke: 70 mm -Motor power: 450 W -Base plate: sheet metal plate -Dimensions: 645/635 / H780 mm -Weight: 130 kg ... mais informação
Speed: 1000 rpm, weight: 2400 kg. On-site viewing is possible. ... mais informação
There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible. ... mais informação
arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm ... mais informação
bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm ... mais informação
spindle diameter: 82 mmx-travel: 850 mmy-travel: 1100 mmTable dimensions: 1200x1130 mmwork height max.: 1100 mmspindle turning speed range: 10-1500 U/minspindle taper MT: 5 digital readout: spindle stroke: 370 mmBoring power: 70 mmthroat: 995 mmFeed: 0,03-2,2 mm/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 3x3x3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Morse 6 ... mais informação