Fabricante:
(Categoria: 102)
Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm.
Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation. ... mais informação
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... mais informação
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... mais informação
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... mais informação
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... mais informação
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... mais informação
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... mais informação
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... mais informação
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.