tornos usadas para venda

turning diameter:650 mmturning length:2000 mmface slide travel:445 mmturning diameter over slide:260 mmturning speeds:1-2.000 1/mintransmission ratio:2 spindle:33 / 22 kWspindle bore:130 mmquill stroke:200 mmturret head:12 Pos.workpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,SAUTER-turret with 12 pos. (6 for live tools),VDI 40,SMW 3-jaw-chuck dia 400mm,tailstock,steady 100-250mm,C-axis,chipconveyor,free contour-programming, memory 256kB,accessoriesno hour meter, max. 1 shift

:KTH 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-8/A2-11/A2-15/A2-20 spindle speeds:0-1400/0-1000/0-750/0-560 1/min.spindle bore:130/155/230/310 mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:22 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2190 x 2315 mmautomatic tool changer:8-fach CNC controller:Siemens/Fanuc/Fagor tools:1 Satz CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...

turning diameter over bed:500 mmturning diameter over slide rest:300 mmturning length:1000 mmspindle turning speed range:16 - 535 U/minno. of turning speeds:12 spindle bore:55 mmoperating of tailstock-quill:240 mmtailstock taper MT:4 dimensions of the machine ca.:2,7 x 1,4 x 1,4 mtotal power requirement:7,5 kWmachine weight ab.:2000 kg

turning diameter:730/660 mmturning length:1.498 mmTravel turret No.1 (milling spindle) x/y/z:750 / +- 210 / 1.550 mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120 °Rapid traverse feeds turret 1 (milling head) x/y/z:50/30/50 m/minRPM milling spindle:12.000 1/minpower capacity - milling spindle:18,5 / 11 kWTorque of milling spindle:120 Nmtool taper milling spindle:CAPTO C6 Tool magazine for milling spindle (turret 1):100 Pos.Spindle 1 RPM:3.000 1/minSpindle 1 Power:30 / 25 kWTorque Spindle 1:1.000 / 840 NmC-axis spindle 1:0,001 °Bar capacity spindle 1:90 mmSpindle 2 RPM:3000 1/minSpindle 2 power:30 / 25 kWTorque Spindle 2:1.000 / 840 NmC-axis spindle 2:0,001 °Bar capacity spindle 2:90 mmspindle distance:1.862 mmtotal power requirement:100 kVAweight of the machine ca.:26,6 tdimensions of the machine ca.:5x 2,99 x 3 m9-axis turn-milling center with B-axis +-120°,lower turret wi ...

turning diameter:1000 / 700 mmturning length:3000 mmface slide travel:600 mmturning diameter over slide:700 mmturning speeds:1-1.800 1/mintransmission ratio:2 spindle:46 (60%) kWspindle bore:132 mmquill stroke:280 mmworkpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,PARAT tooling system,SCHUNK ROTA NC 500-160 power chuck,tailstock,chipconveyor

turning diameter:900 turning length:1986 mmcontrol:FANUC 18 iTB turning diameter over slide:680 mmturning speeds:1800 1/minturret (x-stations):12 power capacity:37 / 30 kWcentre distance:2050 mm:1 / 12 x BMT :116 mmtotal power requirement:45 kWweight:15,0 tdimensions of the machine ca.:5,30 x 2,60 x 2,40 mHeavy CNC lathe with c Axis and driven toolstailstocktool eye chipconveyordriven tools ( on 6 stations ) hydraulic staedyhydraulic 3-chaw-juck D= 600 mm oil mist model IFMmanuals15 sets of chaws15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

turning diameter:256 mmturning length:455 mmswing diameter over slide rest:260 mmtravel -x axis:198 mmtravel -z axis:508 mmturning speed range - main spindle:4800 1/minpower capacity - main spindel:18 / 11 kWC-Axis:0,01 °turret (x-stations):12 x VDI 30 PosNumber of driven tools:6 Postool taper:VDI 30 Spindle speed driven tools:5000 min -1spindle hollow:52 mmrapid power traverse in X-and Z direction:30 m/minpower capacity - driven tools:4,4 kWtotal power requirement:25 kVAweight of the machine ca.:4 to.dimensions of the machine ca.:3,1 x 2,3 x 2,2 mCNC lathe with tailstock,12-Pos. turret (6 pos. for live tools), chipconveyor,hollow clamping cylinder,graphic simulation and collission check,ethernet, USB,chipconveyor,parts catcher,tooleye,flush gun,collet chuck KITAGAWA CRL60A6,tailstock manually, quill programable,LED light,machining of plastic material only!hour meter: approx. 18.000h "m ...

bar material dia.:10 mmturning length:105 mmturning speeds:15.000 / 10.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 18i-TB total power requirement:3,5 kVAweight of the machine ca.:1,5 tdimensions of the machine ca.:1,9 x 0,8 x 1,7 mtoolpiece turning speed range:8.000 1/minmain spindle power:3,7 kWsub spindle power:1,1 kWCNC sliding headstock machine,subspindle,7 axis (X1, Z1, Y1, C1, X2, Z2, C2),barloader LNS TRYTON 112 A-B,Fireextinguisher KRAFT und BAUER,parts-ejector,coolant tank,machining with oil as coolant,reading hours:approx. 38.000 hours "machine on", approx. 27.000 hours "machining"

turning diameter:620 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:540 mmbed width:350 mmspindle taper:As-8 spindle speeds:0-2500 1/min.spindle bore:105/155 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2300/2515/3010/3700 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:570 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:490 mmbed width:350 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:80 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2250/2475/2970/3640 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 285 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:80 mmturning length:235 mmmax. bar capacity:42 mmpower capacity - driven tools:1 kWspeeds spindle 1:6000 1/minspeeds spindle 2:5000 1/minnumbers of turret head positions:8 posdrive capacity - spindle motor:SP1 11 / SP2 5,5 kWTools speed:60-6000 1/minweight of the machine ca.:ca. 3 tdimensions of the machine ca.:2,4 x 1,5 x 1,6 mHigh Performance CNC Turning- and Milling Center - chipconveyor- subspindle- live tools- C-axis- brake- partscatcher and partsconveyor- tool eye- barloader LNS HYDROBAR MINI-SPRINT approx. 5000 working hours

turning diameter:450 mmturning length:1000/1500 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:260 mmbed width:300 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000/1500 mmrapid traverse x/z:15/12 m/minpower requirement:9 kWweight of the machine ca.:1400/1680 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 225 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:750/1000 mmcontrol:Fanuc/ Fagor/ Siemens max. swing over slide:300 mmbed width:250 mmspindle taper:As-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtransmission ratio:1 tailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750/1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200/1490 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

swing diameter:260 mmcontrol:840 D SIEMENSturning speeds:3.500 1/minspindle drive:36 / 28 kWchucking diameter:260 mmtravel -x axis:900 mmtravel -z axis:400 mmturret head:12 Pos.tool holder:VDI 40 rapid power traverse in X-and Z direction:100 / 30 m/mindimensions of the machine ca.:5,3 x 2,4 x 3,31 mCNC vertical lathe with 2 spindles,2x RÖHM power chucks dia. 315mm,

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mmswing diameter:1250|1600|2000|2300 mmturning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mmtable speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/mintransmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 tmax. torque on the faceplate:20|25|25|25 KNrapid feed of tool post:8000|3000|3000|3000 mm/minfeed speeds:0.1 - 500 mm/minMax. cutting force of tool head :18|25|30|30 KNmTravel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mmTravel of ram (horiz.):850|1000|1115|1400 mmCross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mmpower maindrive:22/30|30/37|37/45|37/45 kWweight of the machine ca.:9|12,5|18,5|20,5 tMachine size (LxWxH):2360x2277x3403|2660x2660x3698|3 ...

turning diameter over bed:280 mmturning diameter over slide rest:160 mmturning length:600 mmupper head travel:100 mmradial face slide travel:150 mmbed width:180 mmspindle head:DIN 55022 Gr. 4 spindle diameter in front bearing:85 mmspindle bore:39 mmtaper bore:d. Hauptspindel MK 5power capacity:2,4 kWturning speed range:48 - 2500 U/minfeeds - longitudinal:0,019 - 1,92 mm/Ufeeds - cross:0,0095 - 0,960 mm/Uthreading:27metr.Steig. 0,25-12mmdiameter of quill:40 mmquill stroke:85 mmColour:6011/grün RALvoltage:380 / 50 V / Hzweight of the machine ca.:660 kgdimensions of the machine ca.:1580x670x1200 mmNice machine from first handincl. Collet clamping System plus 1 pcs Colletincl. Multifix toolhoder system plus 1 toolholder machine under power for testingmore accessories on regrest

turning diameter over bed:402 mmturning diameter over slide rest:245 mmturning length:750/1000 mmcentre height:200 mmbed width:250 mmmax. workpiece weight between centres:280/300 kg:135 kgspindle bore:42 mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minlongitudinal feed:0.05-0.752 mm/Ucross feed:0.025-0.376 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:58 mmsleeve conus:4 MKquill stroke:180 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:4 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix

turning diameter over bed:502 mmturning diameter over slide rest:310 mmturning length:1000/1500 mmcentre height:250 mmbed width:300 mmmax. workpiece weight between centres:450/750 kg:225 kgspindle bore:58 (opt. 105) mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minspindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/Ucross feed:0,022-0,296 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:69 mmsleeve conus:4 MKquill stroke:200 mmpower requirement:5,5 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 250 SeriesMore information can be found in the appendix