tornos usadas para venda

turning diameter:50 mmturning length:40mm bei Automatisierung; sonst 100 mmcontrol:Fanuc Oi-TF (8,4 '' LCD-Monitor) greates pass round over bed:230 mmBar capacity:26 mmspindle speeds:6000 1/minspindle nose:A2-4 spindle drive:3.7/5.5 KW (Fanuc ?3/10000i) spindle bearing diameter:70 mmrapid power traverse in X-and Z direction:30 m/mintravel -x axis:220 mmtravel - z:220 mmautomatic feeds:0,001-5000 mm/minMachine size (LxWxH):1370x1630x1750 mmhydraulic motor:0,75 kWhydraulic pump:30 L/minhydraulic tank:30 lservo motor X-axis:0,75 kwservo motor Z-axis:0,75 kwweight of the machine ca.:1,5 tmachine dimensions:1490x1870x1610 xxcoolant system:100 Ltool holder:innen, außen, Bohrhülse etc. collet chuck:mit Adapter (hydraulisch) GANG TOOLING SYSTEM:(Linearschlitten; kein Revolver) facing tool holder:3 Stk.OD tool holder:2 Stk.I.D. TOOL HOLDER :(Ø 20 MM) X 4 Stk. BORING SLEEVES :10 Stk. (Ø 6, 8, ...

turning diameter:160 mmturning length:500 mmweight of the machine ca.:4 tThis machine comes from a training workshop.Technically, the machine is fully functional and in a well-maintained condition.  ... mais informação

bar material dia.:51 mmturning length:644 mmturning dia. over bed:600 mmturning diameter over slide:430 mmy-axis:100 (+-50) mmturning speeds:2x 5.000 1/minpositive location each:2x C-Achse, 0,001° GradSub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos.driven tools:2x 12 Pos.turning speeds:2x 4.000 1/mincontrol:FANUC 18 iTB total power requirement:30 kVAweight of the machine ca.:8 tdimensions of the machine ca.:3,5 x 2,5 x 2,3 mturning- milling center with Y-axis,collet device on main and subspindle,high pressure pumps 2x 14bar,parts catcher/conveyor,barloader ENTL 10-65,chip conveyor,lot of accessoriesapprox. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

turning diameter:300 mmturning length:320 mmcontrol:Fanuc 0i TD MG max. swing diameter:520 mmspindle speeds:4800 1/min.spindle passage:44 mmspindle drive:7,5/9 kWbrand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 170/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. Ø 100 mm7. Bar capacity Ø dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 500 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guide14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Eur ...

turning diameter:300 mmturning length:600 mmcontrol:Fanuc 0i TD swing diameter over bed slide:320 mmswing over bed:520 mmbar material dia.:64 mmspindle speeds:4500 1/min.spindle drive:11/15 kWturret:12-fach Tool setter:manuell brand new CNC turning center with Contains:1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY)2 X/Z AXIS STROKE 170/600 MM3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN4 SPINDLE MOTOR 11/15 KW5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE)6 SPINDLE BEARING DIA. F 120 MM7 BAR CAPACITY DIA. F 64 MM8 HYD. HOLLOW CHUCK 10" X 3 JAWS9 HYD. UNIT FOR CHUCK WITH AIR COOLER10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM12 ELECTRICAL CABINET WITH HEAT EXCHANGER13 STANDARD SPLASH GUARD14 COOLANT UNIT15 TRANSFORMER (POWER SOURCE 380V)16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE)17 MACHINE COLOR TONGTAI WHITE/DRAK GREY18 TRICOLOR LAMP19 FANUC  ...

turning diameter:520 mmturning length:600 mmcontrol:Fanuc 0i TF swing diameter over bed slide:320 mmmax. turning diameter:280 mmBar capacity:51 mmspindle speeds:4500 1/min.x-travel:200 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/mintailstock quill stroke:100 mmtailstock adjustment:500 mmspindle drive:11/15 kWMachine size (LxWxH):3,440x1,820x2,380 mmmachine weight:4100 kglive center:4 MKturret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mmbrand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cool ...

turning diameter:520 mmturning length:500 mmcontrol:Fanuc Oi-TF max. swing diameter:520 mmspindle speeds:4500 1/min.spindle drive:11 / 15 kWbrand new CNC slant bed lathe with Contains:1. Control system Fanuc Oi-TF (8,4" LCD monitor)2. X/Z-axis stroke 170/400 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 KW5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. 100 mm7. Bar capacity dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 275 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guard14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Europe)Standard acces ...

turning diameter over bed:530 mmturning diameter over slide rest:320 mmturning length:2000 mmcenter height over bed:275 mmspeeds:18 - 1600 U/minspindle bore:60 mmbed width:430 mmengine output:17 kWweight:2700 kgspindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m- 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder- workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:830|1080|1330|1580 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine  ...

turning diameter:2000 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:1640 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine width/height:2500 x 2400 mmmax. workpiece weight between centres:900 ...

turning diameter:650 mmturning length:2000 mmface slide travel:445 mmturning diameter over slide:260 mmturning speeds:1-2.000 1/mintransmission ratio:2 spindle:33 / 22 kWspindle bore:130 mmquill stroke:200 mmturret head:12 Pos.workpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,SAUTER-turret with 12 pos. (6 for live tools),VDI 40,SMW 3-jaw-chuck dia 400mm,tailstock,steady 100-250mm,C-axis,chipconveyor,free contour-programming, memory 256kB,accessoriesno hour meter, max. 1 shift

:KTH 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-8/A2-11/A2-15/A2-20 spindle speeds:0-1400/0-1000/0-750/0-560 1/min.spindle bore:130/155/230/310 mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:22 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2190 x 2315 mmautomatic tool changer:8-fach CNC controller:Siemens/Fanuc/Fagor tools:1 Satz CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...

turning diameter over bed:500 mmturning diameter over slide rest:300 mmturning length:1000 mmspindle turning speed range:16 - 535 U/minno. of turning speeds:12 spindle bore:55 mmoperating of tailstock-quill:240 mmtailstock taper MT:4 dimensions of the machine ca.:2,7 x 1,4 x 1,4 mtotal power requirement:7,5 kWmachine weight ab.:2000 kg

turning diameter:730/660 mmturning length:1.498 mmTravel turret No.1 (milling spindle) x/y/z:750 / +- 210 / 1.550 mmSwivel range Turret No. 1 (milling spindle) B-axis:+-120 °Rapid traverse feeds turret 1 (milling head) x/y/z:50/30/50 m/minRPM milling spindle:12.000 1/minpower capacity - milling spindle:18,5 / 11 kWTorque of milling spindle:120 Nmtool taper milling spindle:CAPTO C6 Tool magazine for milling spindle (turret 1):100 Pos.Spindle 1 RPM:3.000 1/minSpindle 1 Power:30 / 25 kWTorque Spindle 1:1.000 / 840 NmC-axis spindle 1:0,001 °Bar capacity spindle 1:90 mmSpindle 2 RPM:3000 1/minSpindle 2 power:30 / 25 kWTorque Spindle 2:1.000 / 840 NmC-axis spindle 2:0,001 °Bar capacity spindle 2:90 mmspindle distance:1.862 mmtotal power requirement:100 kVAweight of the machine ca.:26,6 tdimensions of the machine ca.:5x 2,99 x 3 m9-axis turn-milling center with B-axis +-120°,lower turret wi ...

turning diameter:1000 / 700 mmturning length:3000 mmface slide travel:600 mmturning diameter over slide:700 mmturning speeds:1-1.800 1/mintransmission ratio:2 spindle:46 (60%) kWspindle bore:132 mmquill stroke:280 mmworkpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,PARAT tooling system,SCHUNK ROTA NC 500-160 power chuck,tailstock,chipconveyor

turning diameter:900 turning length:1986 mmcontrol:FANUC 18 iTB turning diameter over slide:680 mmturning speeds:1800 1/minturret (x-stations):12 power capacity:37 / 30 kWcentre distance:2050 mm:1 / 12 x BMT :116 mmtotal power requirement:45 kWweight:15,0 tdimensions of the machine ca.:5,30 x 2,60 x 2,40 mHeavy CNC lathe with c Axis and driven toolstailstocktool eye chipconveyordriven tools ( on 6 stations ) hydraulic staedyhydraulic 3-chaw-juck D= 600 mm oil mist model IFMmanuals15 sets of chaws15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

turning diameter:256 mmturning length:455 mmswing diameter over slide rest:260 mmtravel -x axis:198 mmtravel -z axis:508 mmturning speed range - main spindle:4800 1/minpower capacity - main spindel:18 / 11 kWC-Axis:0,01 °turret (x-stations):12 x VDI 30 PosNumber of driven tools:6 Postool taper:VDI 30 Spindle speed driven tools:5000 min -1spindle hollow:52 mmrapid power traverse in X-and Z direction:30 m/minpower capacity - driven tools:4,4 kWtotal power requirement:25 kVAweight of the machine ca.:4 to.dimensions of the machine ca.:3,1 x 2,3 x 2,2 mCNC lathe with tailstock,12-Pos. turret (6 pos. for live tools), chipconveyor,hollow clamping cylinder,graphic simulation and collission check,ethernet, USB,chipconveyor,parts catcher,tooleye,flush gun,collet chuck KITAGAWA CRL60A6,tailstock manually, quill programable,LED light,machining of plastic material only!hour meter: approx. 18.000h "m ...

bar material dia.:10 mmturning length:105 mmturning speeds:15.000 / 10.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 18i-TB total power requirement:3,5 kVAweight of the machine ca.:1,5 tdimensions of the machine ca.:1,9 x 0,8 x 1,7 mtoolpiece turning speed range:8.000 1/minmain spindle power:3,7 kWsub spindle power:1,1 kWCNC sliding headstock machine,subspindle,7 axis (X1, Z1, Y1, C1, X2, Z2, C2),barloader LNS TRYTON 112 A-B,Fireextinguisher KRAFT und BAUER,parts-ejector,coolant tank,machining with oil as coolant,reading hours:approx. 38.000 hours "machine on", approx. 27.000 hours "machining"