Fabricante:
(Categoria: 102)
number of spindles:8 spindle passage:67 mmMachine type: CNC controlled multi spindle automatic latheManufacturer: MORI SAYType: TMZ 8/67 CNCYob: 2018Double four-spindle machine, eight-spindle machinewith spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 colletsequipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of:indexing speed of the spindles drum with bar feed at station 1speed and orientation of each of 8 main spindlesspeed and position of each of 8 frontal slidesspeed and position of each of 7 compound slidesspeed and position of the cut-off slide at station 8for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer.Machine equipped with the following optional items:BAR LOADERautomatic bar feeder model PB 60 by CUCCHI BLT for bars L = 3 m, bundle ...
Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2019full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot make HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:6 spindle passage:51 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: S51 PCYob: 2008Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmhirth-coupled spindle drum,Control: Software SICS 2000 / Windows 2000 / Beckhoff TwincatPosition I: cross slide X-I; longitudinal slide Z-IPosition II: compound slide cross XZ-II; longitudinal slide Z-IIPosition III: compound slide cross XZ-III; longitudinal slide Z-IIIPosition IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IVPosition V: cross slide X-V; compound slide longitudinal ZX-VPosition VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VICoolant tank with hinged belt chip conveyor;Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar;Workpiece collecting device with belt conveyor (low-damage workpiece ...
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.
Article: CNC LatheManufacturer: SpinnerType: SB-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: CNC LatheManufacturer: SpinnerType: BK-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Hand-, Cycle- and CNC-Lathe Manufacturer: DMT KernType: CD480Control: HaidenhainYear of construction: 2000Machine has processed plasticLead screw and/or lock case must be overhauledSale without tool holder!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Lathe in good condition and fully functional. Used Lorch LAS small lathe, supplied with all the accessories you see in the photos. ... mais informação
Inv. number: 108183 Type: SV 18R/1250 Parameters: 380 mm, 1250 mm Manufacturer: Thos Year of Manufacture/SO/GO: 1962/-/- Location: Czech Republic Description: The machine is in good technical condition, it is possible to inspect it in operation by agreement. Accessories: 4 x 160 flange, 1 x 200 flange, 2 x chuck, face plate, drive plate, knife clamp, fixed + movable bezel, jaws, chuck cover and more. Circulating diameter above the bed: 380mm Distance between spikes: 1250mm Circulating diameter above the support: 215 mm Power of the main electric motor: 6 kW LxWxH: 3020x950x1210 mm Machine weight: 1910 kg.
The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.
An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.
screw-cutting lathe model 1M65 (RMTs 5000 mm) - Ryazan Machine-Tool Plant. Equipment after a major overhaul with modernization of the electrical and mechanical parts of the machine (a frequency converter is installed, the speed box of the machine is modernized (2-stage), the speed is controlled by a joystick) Specifications: Model 1m65 machines are designed for a variety of turning operations, including turning cones and threading: metric, inch, modular, pitch The largest diameter of the workpiece to be installed and processed, mm: over support, mm 650 over the groove in the bed, mm 1400 The biggest length of the workpiece to be processed, mm 5000, The length of the groove in the bed from the cartridge mirror, mm 390 Headstock spindle end size according to DIN 2-15M Number of spindle speed steps 24 Diameter of the cylindrical bore in the spindle, mm 128 Spindle speed limits, ...
Screw-cutting lathe 1a667, good technical condition, low wear, 100% set. ... mais informação
The machine is in good technical condition. Revolving diameter above bed: 320mm Distance between spikes: 1250mm New belt. New electric motor. The lathe has two main gears, the others are controlled by a new frequency converter (5.5 kW), which is strong and fast. By prior arrangement, the possibility of a tour in progress.
Offered for sale: Very complete Okuma CNC lathe type Genos L300E-MY x 1000 mm. This is a very advanced CNC lathe equipped with OSP-P300L-R controller. The machine is equipped with driven tools, including a quick-change chuck type VDI-40 with a full C-axis. The machine also has a Y-axis (movement 100 mm) and a countercenter. The machine is equipped with a short LNS bar magazine of the type SL-65S. The machine also has a right-hand discharge chip conveyor. In combination with the collet device, the bar passage is 60 mm. The maximum turning diameter is Ø340 mm, The maximum turning length is 1020 mm. The Y-axis movement is 100 mm (+50, 150 mm), maximum speed is 3,800 rpm. Main motor power is 22/15 kW. Mesh weight 7,300 kg.
For sale: Robust Okuma CNC lathe type LB-400M equipped with an OSP P200L controller. The turning diameter above the bed is 620 mm. The maximum turning diameter is 420 mm. The maximum turning length is 1,250 mm. The machine is also equipped with a VDI-40 turret with 12 positions, which allows you to store powered holders in any position. The machine comes with many tool holders. The machine is also equipped with manually operated glasses. The main motor power is 22 kW. The machine has a maximum speed of 3,500 rpm.