Fabricante:
(Categoria: 102)
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... mais informação
turning diameter:280 mmturning length:250 mmcontrol:Fanuc 0i TF swing diameter over bed slide:280 mmBar capacity:44 mmspindle speeds:4800 1/minx-travel:155 mmy-travel:+/-35 mmz-travel:250 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:11/15 kWMachine size (LxWxH):1.842x2.793x2.446 mmmachine weight:5000 kgfeeds:0.001-500 mm/Uc-axis:0.001 °turret:16-fach, BMT-55 type Y-axis:über Revolver mmhollow chuck:hydr. 200 mm:8 bartailstock:ohne! brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cooler11. Power turret syst ...
X-travel: 210mm, z-travel: 100mm, operational hours counter: 19,741h, with handling. ... mais informação
There are three identical machines available, two machine have a Bar Loader SAMECA MONOSAM 65 each, including documentation, various accessories and spare parts, were maintained regularly. ... mais informação
Length: 1800mm, width: 1000mm, height: 1800mm, weight: 800kg, the top slide of the machine is defective. ... mais informação
turning diameter:402 mmturning length:750 mmcontrol:FAGOR 8037 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2000x1115x1670 (LxBxH) mmturret:8 fachCNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents
X-travel: 189,2mm, y-travel: 101mm, z-travel: 638,3mm, max. rotational speed: 5000/min, swing over bed: 519mm, controls: FANUC Series 331i-MODEL A, connected load: 81.5kVA, length: 2991mm, width: 2289mm, height: 2089mm, weight: 6.57t, operational hours counter: 11.873h, including documentation and accessories.
turning diameter:360 mmturning length:530 mmcontrol:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mmswing diameter over bed slide:360 mmBar capacity:64 mmspindle speeds:3500 1/minspindle speed:Gegenspindel: 5000 1/minx-travel:230 mmy-travel:±51 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:17 (Hauptspindel) kWspindle drive:5,5/7,5 (Gegenspindel) kWMachine size (LxWxH):3290x2180x2337 mmmachine weight:6100 kgc-axis:0.001 °turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mmhollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 barhydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 20 ...
Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request. ... mais informação
turning diameter:402 mmturning length:1000 mmcontrol: 8055 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2250x1115x1670 (LxBxH) mmturret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents
Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. ... mais informação
turning diameter over bed:650 mmturning diameter over slide:450 mmturning length:1435 mmbed width:350 mmspindle bore:155 mmspindle speed:50-800 (3 stufig, stufenlos) U/minspindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mmtailstock quill diameter:95 mmtailstock quill taper MT:5 MKtool post size:25x25 mmpower requirement:7,5 kWweight of the machine ca.:2400 kgdimensions:3020x1140x1770 mmDRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 StückFactory new center lathe with 2-axis digital display and variable speed and many more.CHARACTERISTICS:Powerful, flexible and productiveWith an optimal pric ...
turning length:1500 mmweight of the machine ca.:6 ttool taper:VDI40 transport dimensions LxWxH:3,9 x 2,0 x 2,5 mSpindle running hours : 23149 ... mais informação
turning diameter over bed:1630 mmturning diameter over slide rest:1190 mmturning length:5000 mmcentre height:800 mmswing in gap:2100 mmbed width:1000 mmmax. workpiece weight:12000 (zw. Spitzen) kgnumber of spindle speeds:16 4 - 242 U/minspindle bore:120 mmtailstock quill diameter:180 mmtailstock quill stroke:350 mmWeight approx.:22 ttotal power requirement:ca. 25 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023. ... mais informação
turning diameter over bed:2300 mmturning diameter over slide rest:1860 mmturning length:5000 mmcentre height:1150 mmswing in gap:- mmlength of gap:- mmfaceplate:1500 mmbed width:1000 mmmax. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kgnumber of spindle speeds:3-300 U/minspindle bore:206 mmtailstock quill diameter:- mmtailstock quill stroke:- mmWeight approx.:26 tspindle drive:50 kWDRO:optional 4 jaw chuck:1500 mmHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm
Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts. ... mais informação
Turning length: 3000mm, center height: 392mm, swing over bed/ slide: 800/ 490mm, rotational speed: 1500-6000/min, tailstock diameter: 100mm, controls: FAGOR 800 T, with documentation, three-jaw chuck 400mm, with change jaws, four-jaw plate face 500mm, Multifix change holder, fixed bezel. ... mais informação