fresadoras usadas para venda

Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -Clamping table: 490 x 400 mm -Travel path: X/Y/Z 320/385/430 mm -Spindle mount: SK30 -Drive: 1.1 kW -Speed speeds: 560 to 14000 rpm, 8 levels -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477kg

The machine is formed of the following main assemblies: floor table, left and right beds, gantry assembly (a saddle and a column on the each bed , a cross-rail, and a cross beam ) and two milling heads. The gantry is guided by the slideways of the two beds and the cross rail is guided by the slideways of the two columns. The milling heads travel on the cross rail guideways. Inside of the each milling head is guided a ram with the main spindle. Fixed table length 36 000 mm Fixed table width 6 000 mm Distance between columns with covers / without covers 6 900 / 7 100 mm Gantry travel 30 000 mm Cross rail travel 3 100 mm Milling heads (right and left) travel on cross rail 7 400 mm Vertical travel of right and left rams 1 000 mm Gantry work feeds 0 - 6 000 mm/min Gantry rapid feed 10 000 mm/min Milling heads (right and left) work feeds 0 - 3 000 mm/min Milling heads (right and l ...

bore capacity in steel (diameter): 23 mmx-travel: 400 mmy-travel: 285 mmtotal power requirement: 3 kWweight of the machine ca.: 1.400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

x-travel: 400 mmtool taper: SK 40 : schwenkbar table:: schwenkbar vice: . weight of the machine ca.: 1,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

x-travel: 700 mmy-travel: 250 mmz-travel: 470 mmtable-size: 1100x300 mmspindle turning speed range: 45-2000 U/minweight of the machine ca.: 2 tWith digital read-outPICTURES AND MORE INFORMATION ON www.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... mais informação

No. 2179: 1 used Universal tool milling machine MAKE HERMLE, type UWF-801, built 1980 with Heidenhain TNC-124 track control Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid table 800 x 350 mm, Chip tray, automatic tool clamping, Coolant device, operating instructions, electronic handwheel in the control panel Other: Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid speed 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1100 kg.

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible. ... mais informação

Copy milling machine Fluri F 14 sec copy milling machine Country of origin: Switzerland Year of construction: 1980 Control Heidenhain TNC 131 Original price at that time: approx. 700,000.00 DM (357,904.32 €) Working rotary table 1200 x 700 Model table 800 x 700 Commuting to work X 1200 mm Y 700 mm C 360 degrees Z 700 mm W 300 mm B +/- 45 degrees Max. table load 3000 kg Gross machine weight 13000 kg Total connected load 52 KW Packages for transport: 1.) Machine height 3000mm x length 3430mm x width 3200mm 2.) Lattice box 3.) Euro pallet with hydraulic power unit 4.) Control cabinet on Euro pallet approx. 2000mm wide The machine can be disassembled for transportation as follows: Without leveling feet, the tiller has a height of exactly 3000 mm the length of the machine is: 3430 mm the width is 2530 mm if we disassemble the motor from the Y-axis Location ...

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min,eilgaenge 4 m/min, weight approx. 1.5 t  ... mais informação

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/mindrive motor: kWdistance spindle - column: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 3 phase A.C. 380 V control voltage 220 V  ,Approx. Onsite Dimension. (l x w x h): 1,300 x 1,250 x 2,450 mm, weight approx.: 1,420 kg ... mais informação

For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.

Article number: 07-99-001 Manufacturer: Fritz Werner Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1900x1800x1800mm Weight: approx. 1200kg Travel: X-axis: approx. 600mm Y-axis: approx. 200mm Z-axis: approx. 500mm Table clamping surface: approx. 740x220mm Spindle: Speed range: approx. 3000rpm Drive power: approx. 7.5kW Feeds & rapid traverses: in all 3 axes Max. milling area (dovetail): approx. 400mm width Swivel range 1st & 3rd milling spindle: approx. 50-80 degrees Height adjustment 1st & 3rd milling spindle: approx. 80mm Height adjustment 2nd milling spindle: approx. 50mm Accessories  Left/Clockwise  Mechanical vise  10 pieces of various milling head attachments  Work light Other accessories on request Price and other technical data on request

Waldrich Coburg gantry milling center 17-10 FP 250 The machine is in working condition. The machine was modernized in 2021. FANUC control rack. Used for machining large parts as well as many small workpieces. The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries. Workpieces with a maximum weight of 60 tons

Max. rotational speed: 2500/min, feed rate: 5-500mm/min. ... mais informação

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Safety handwheels  Horizontal spindle cover cap  3-axis digital display SINO New  Machine feet  Tilting swivel table  electrically moni ...

Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete documentation  Various tension wrenches  Horizontal spindle cover cap  Safety handwheels  3-axis digital display SINO New  Machine feet New  ...