Fabricante:
(Categoría: 104)
Sanding path X/Y: 1000mm/500mm, weight: 5000kg. Including coolant pump with tank (approx. 252l), hydraulic system and self-made suction device. Dressing axis (W-broken). Documentation available. On-site inspection is possible. ... más información
Grinding range X/Y/Z: 600mm/375mm/375mm, grinding wheel: 300mm/50mm/76.2mm, max. table load: 300kg, table clamping surface X/Y: 900mm/350mm, weight: 3300kg. Including hydraulic system, self-made extraction system. X/Y/Z axes limited in function. Documentation available. On-site inspection is possible.
Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm. ... más información
Grinding diameter: 315mm, grinding length: 2500mm, center height: 165mm, speed: 500rpm (10 steps), spindle bore diameter/taper: 30mm/MK4, grinding wheel diameter: max. 500mm, table size: 3500mm/310mm, table tilt: approx. 4.8°, longitudinal feed of the table: 5-2680mm, feed: 50-4000mm/rev. Weight: approx. 7400kg, Dimensions X/Y/Z: 6500mm/1700mm/2000mm. Headstock defective, can be repaired.
Grinding length: 600mm, grinding width: 375mm, workpiece height: 375mm, magnetic table dimensions X/Y: 600mm/400mm, grinding wheel dimensions: 300mm/50mm, max. table speed: 30m/min, grinding wheel speed: 1450rpm, weight: approx. 3500kg, dimensions X/Y/Z: 2800mm/2500mm&2500mm. Guideway run-in, no oil pockets, magnet failure X and Y axes 0.01mm and 0.02mm respectively. Machine in good working order. Documentation available.
Grinding length: 1000mm, center height: 180mm, max. external grinding diameter: 360mm, max. internal grinding diameter: 260mm, max. internal grinding depth: 300mm, max. workpiece weight: 200kg. B-axis on workpiece holder headstock: 0-180°, B-axis positioning: 0.001°, headstock stroke: 320mm, workpiece holder slide stroke(Z): 1300mm, grinding wheel: 500mm/60mm/100mm/203mm, speed: 20-45m/sec. Internal grinding spindle diameter: 120mm, quill stroke: 60mm, Speed: 1200rpm. Dimensions X/Y/Z: 4340mm/2250mm/2200mm, weight: approx. 7100kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.
Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg ... más información
centre height: 165 mmcentre distance: 450 mmweight: 165 kgdimensions of the machine ca.: 0,4 x 0,4 x 1,4 m3 Geschwindigkeiten, Rechts-/ und Linkslauf.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 8 A Magnet dimensions: 500 x 200 mm Table dimensions: 620 x 250 mm With 3 grooves Grinding wheel diameter: approx. 150 mm Incl. 2-axis digital readout from the manufacturer HEIDENHAINweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 950 x 1,600 mm
Description: rotational speed 2800 RPM , power supply 230 volts 0.38 kw ,Approx. Onsite Dimension. (l x w x h): 600 x 400 x 1,200 mm, weight approx.: 20 kg ... más información
Description: Voltage 230 volts, 3000 rpm, without additional accessoriesApprox. Onsite Dimension. (l x w x h): 600 x 600 x 1,200 mm, weight approx.: 60 kg ... más información
Description: Incl. Cupboardweight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 400 x 1,400 mm ... más información
Description: Swivelling magnet Magnet clamping surface: 1500 x 150 mm + 1000 x 150 mm Grinding motor: 7kW Accessories: ,50 slip rings Additional and , suitable slip rings can be purchased separately: (approx. 100 pieces Ø 150 x 120 mm BHG Ø 76.2 mm)Approx. Onsite Dimension. (l x w x h): 4,500 x 1,000 x 1,800 mm, weight approx.: 4,000 kg
Description: The following repairs have been carried out in recent years: Tubular heating element replaced (2002) Rubber screen (2005) Magnetic dosing pump (2007) Spur gear motor (2016) The rubber coating is in good condition (see photos) Speed range: 800 - 1500 rpm Drum: Inner diameter: approx. 1280 mm Outer diameter: approx. 1360 mm Depth: approx. 600 mm Total drive power: 7.5 kW Connected load: 380 V Installation plan: see photos Approx. Onsite Dimension. (l x w x h): 2,200 x 1,900 x 1,700 mm, weight approx.: 1,500 kg
Description: Machine number: 1999 Grinding wheel diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 70 kg ... más información
Description: Band width: approx. 50 mmApprox. Onsite Dimension. (l x w x h): 700 x 500 x 1,600 mm, weight approx.: 50 kg ... más información
Description: Machine number: 7115 Working range: Largest sanding width: 120 mm Maximum working height with new sanding tool (workpiece passage): 50 mm Sanding wheel: Speed of upper sanding wheel: 765 rpm Lower sanding wheel: 765 rpm Peripheral speed of upper sanding wheel: 24 m/s Lower sanding wheel: 24 m/s Diameter of the sanding wheels: 600 mm Dimensions of the sanding tools: ⌀ 600 x 75 x ⌀ 150 mm Feed rates: Workpiece feed (infinitely adjustable): ⌀ 702 from 25 - 245 mm/s Grinding wheel adjustment: One turn of the handwheel: .01' mm One graduation mark of the scale disk: .0001' mm Gradual hydraulic infeed: .0001' - .002' mm For further technical data see pictures With technical documentation The machine includes a rotary table for feeding the individual workpieces, a paternosterweight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 5,000 x 4,000 mm
Description: Machine number: 6952 Working range: Largest sanding width: 120 mm Maximum working height with new sanding tool (workpiece passage): 50 mm Sanding wheel: Speed of upper sanding wheel: 765 rpm Lower sanding wheel: 765 rpm Peripheral speed of upper sanding wheel: 24 m/s Lower sanding wheel: 24 m/s Diameter of the sanding wheels: 600 mm Dimensions of the sanding tools: ⌀ 600 x 75 x ⌀ 150 mm Feed rates: Workpiece feed (infinitely adjustable): ⌀ 702 from 25 - 245 mm/s Grinding wheel adjustment: One turn of the handwheel: .01' mm One graduation mark of the scale disk: .0001' mm Gradual hydraulic infeed: .0001' - .002' mm For further technical data see pictures With technical documentation The machine includes a rotary table for feeding the individual workpieces, a paternosterweight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 5,000 x 4,000 mm
Description: Belt width: 75 mm With suction unit from the manufacturer STRAHLBOSS Machine number: 4929 Material support length: approx. 900 mm (rolling elements) Installed belt grinding width: approx. 80 mm For belt lengths: 4000 mmweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 2,100 x 2,200 mm
surface area: 1.000 x 600 mmtable load: 1.500 kgtravel -x axis: 1.200 mmtravel -y axis: 652 mmtravel -z axis: 497 mmMotor Capacity: 7,5 kWFlat Grinding Machine | OKAMOTO - ACC 106 CA-IQ equipped withmagnetic plateThe machine is in a well-maintained condition andcan be inspected at any time under power.Please note that the technical detailswere added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ACC106 | ACC 106 CA IQ | ACC-106 CA-IQ | ACC106CAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.