máquinas rectificadoras usadas para la venta

Grinding spindle VOUMARD M60DR, max. 60000 rpm, approx. 160 x 300 mm longNext: grinding spindle VOUMARD C28-9D  ... más información

 ... más información

Drill grinding machine for 1.55 to 25.4 mm - see pictures  ... más información

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Article code: 14-04-011 Manufacturer: Hauser Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1969 L x W x H: approx. 1500x1200x1800mm Weight: approx. 1800kg Digital display: 2-axis Working area: approx. 400x250mm Direct reading accuracy: approx. 0.001mm Accuracy of carriage adjustment: approx. 0.002mm Grinding diameter: approx. Ø220mm Lifting speed: approx. 0-6 m/min Speed: approx. 50000 rpm Accessories  Extensive range of accessories / See pictures Other accessories on request Price and other technical data on request

Article number: 14-10-053 Manufacturer: Kugel Müller Very good general condition Machine in need of repair Shipping time: All rights reserved. Year of construction: ca.1988 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure  Interior coolant device  Head cover New Other accessories on requ ...

Article number: 14-10-059 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1968 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure Other accessories on request Price and other technical data on request

Article code: 14-10-061 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Grinding wheels – protection  Documentation  Pull-off device Other accessories on request Price and other technical data on request

Article code: 14-10-066 Manufacturer: Cup Grinding Machine Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 600x600x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 300mm Grinding width: approx. 300mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Grinding wheels – protection Other accessories on request Price and other technical data on request

Puller, automatic, for surface grinding machines, Stroke : 60mm,  ... más información

COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology

Machine : Grinding Wheel Flange Make : and grinding wheels Type: Inner taper mount Pos. Text Stk. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4, 50, 62, 60, 127, 30-50, 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 ca.85 -30 146 H 1 45 60 75 ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 Ps V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

Precision surface grinding machine, COSMOS 7040 SPS, grinding area 700 x 400, grinding wheel 300 x 50 mm, magnetic clamping plate 700 x 400 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take care of the installation and training on site, as well as the subsequent service.

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

With matching spacer rings according to photos. Scope of delivery according to photo 1.  ... más información

Grinding machine for machine tools, especially small lathes, etc.  ... más información

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.  ... más información

Year of construction 1990 Control type CNC Grinding length 600 mm Grinding width 200 mm Workpiece height 375 mm Table load 100 kg Grinding wheel dimensions 250x25x51 mm Run at 1-24 m/min Speed 4200 rpm Drive motor 5 kW Total power requirement 7.5 kW Machine weight ca. 3,2 t Space requirement approx. 3.7 x 2.1 x 2.1 m

Manufacturer | Manufacturer: ASW Model | Model: SRA 250 Grinding process | Grinding process: Groove grinding | plunge grinding Workpiece Diameter | workpiece diameter: 1.5 - 35 mm Grinding Wheel | Grinding wheel: Diameter 450 mm | Width 250 mm | Bore diameter 203.2 mm Control Disc | Regulating wheel: Diameter 250 mm | Width 250 mm | Bore diameter 127 mm Drive power | Drive power: 15 kW Total footprint | Total installation area: approx. 6,300 x 5,100 mm Machine weight | Machine Weight: approx. 10 t

Inner diameter: 150 mm Grinding depth: 200 mm Table stroke: 425 mm gr. oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely variable-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight approx. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional