serras usadas para venda

Description: DCH70M twin tube cutting machine with BEWO DB 70 deburring machine N° 0013913 Specification: , Machinable diameter: 12 - 70 mm Workable length range: 35 - 2000 mm Brushable length range: 140 - 1500 mm , Rated power of cut-off unit: 5.5 kW Log saw unit speed range: 20 -120 m/min Machine equipped with: , Bar feeder with 5-guide beam magazine Ducted air tube cleaning system Operation and maintenance manual Harmonisation to CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 3800x2300mm - 1950 Kg Cutting unit: 4500 x 1300mm - 2800 Kgweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 13,900 x 2,300 x 1,800 mm

Description: Two-pipe cutting machine DCH76M with deburring machine BEWO SCD 90 Suitable for cutting two pipes at the same time and deburring them. N° 1110848 Specification: , Machinable diameter: 8 - 76 mm Cuttable length range: 40 - 2000 mm Brushable length range: 140 - 2000 mm Rated power of cut-off unit: 9.5 kW Cut-off unit speed range: 30 -180 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Control panel containing SIEMENS S7 PLC Packing change table Ducted air tube cleaning system Use and maintenance manual Harmonisation of CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500 x 1300mm - 2800 Kg Electric box: 500 x 3200 mm - 600 Kgweight approx.: 6,800 kg, Approx. Onsite Dimension. (l x w x h): 17,900 x 2,300 x 1,800 mm

Description: Dual-tube cutting machine with deburrer BEWO DB 70 No. 9814454 Specifications: Workable diameter: 12 - 76 mm Range of workable lengths: 35 - 2000 mm Range of brushable lengths: 140 - 2000 mm Rated power of cutting unit: 5.5 kW Range of cutting unit speed: 20 - 120 m/min Machine equipped with: Bar loader with beam magazine with 5 guides Air-channelized tube cleaning system User and maintenance manual CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 5200x2300mm - 2450 Kg Cutting unit: 5500 x 1300mm - 3000 Kgweight approx.: 6,700 kg, Approx. Onsite Dimension. (l x w x h): 16,300 x 2,300 x 1,800 mm

roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m ... mais informação

cutting diameter:520 mmsaw band length:7239 x 50 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mintotal power requirement:9,5 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3,5 x 2,2 x 2,1 m- Multifeed device- infeed roller stand- chip conveyor- automatic operation

cutting diameter:520 mmsaw band length:7239 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mincutting width at rectangle material:520 mmtotal power requirement:9,5 kWweight of the machine ca.:3,8 tMachine with multi feed devicechip conveyorinfeed roller stand ... mais informação

100 % before loadingwarranty:none ... mais informação

: 310 mm: 310 mm: 340 x 310 mmsaw band length: 3730 x 34 x 1,1 mmtable height: 922 mmband speed: 15 - 100 m/mintotal power requirement: 3,0 kWweight of the machine ca.: 1,65 tdimensions: 1950x1755x2100 m2-column automatic band saw X-Smart 3• Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities• Inclination of the saw frame for maximum service life of the saw band• 2-column structure linearly guided on both sides• Linear guided button for automatic cutting height detection• Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles• Hydraulic cutting pressure regulation for maximum cutting performance• Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material• Feed unit via precision ball screw• Double vise before and after the saw band ...

cutting diameter: 250 mmcapacity 90 degrees: flat: mmband speed: 40 / 80 m/minsawing motor: 1,3 kWlength of draw-in: 600 mmsaw band length: mmtable height: mmweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,4 x 1,6 x 1,8 mAutomatic band saw- Feed length max. 500mm- with multiple stroke- chip conveyor- including some saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 270 mmcapacity 90 degrees: square: 260 mm: 350 x 240 band speed: 36/72 m/minsaw band length: 2925 x 27 x 0,9 mmtotal power requirement: 1,9 kWweight of the machine ca.: 0,6 kgDimensions (LxWxH): 1,9 x 1,1 x 1,7 mDouble miter band saw- Semi-automatic- Miter 45° / 60°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mmcapacity 90 degrees: round: 70 mmcapacity 90 degrees: square: 65 mmturning speeds: 52 / 104 U/mintotal power requirement: kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 800 x 600 x 1500 mManual cold circular saw with:- Mitre 45°/45°- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive-Spindle lifting gear: from double mitre saw elumatec DG 204-Manufacturer gearbox: Atlanta, type 539 05 040 i 4-Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW-Dimensions: 450/320/H130mm-Weight: 9.5 kg

Saw capacity: 310 x 260 mm Double sided miter new machine inspection possible ... mais informação

Stock number: 3873 AUTOMATIC BAND SAW Manufacturer: BOMAR, Type: 510.330 GA Year of Make: 2003 Specifications: Size sawing capacity 90 degrees 330 dia/mm Sawing capacity 60 degrees 230 dia./mm Miter +45 -+60 degrees Saw blade size 4870 x 32 (34) x 1.1 Stepless cutting speed 20-90 m/min Total power 4.1 kW NC control. Accessories: Extra blades 2 pcs Length: 2484 mm, Height: 1636 mm, Width: 2477 mm, Weight: 1700 kg

saw blade diameter: 370 x 3,0 x 40 mmcutting diameter: 120 mmstroke: -- mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: li. 120 / re. 105 mmcapacity 45 degrees: square: li. 100 / re. 100 mmcapacity 45 degrees: flat: li. 130x100 / re . 130x10 mmcapacity 60 degrees: round: 110 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 90 x 100 mmtotal power requirement: 1,8 / 2,2 kWweight of the machine ca.: 392 kgdimensions of the machine ca.: 700 x 900 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional is a pneumatic oneVise = MA, availab ...

Description: Double miter band saw with new engine and gearbox Completely overhauled! - Semi-automatic - Miter 45° / 60° Cutting range at 90 degrees: around 230 mm Cutting area at 90 degrees: square 230 mm Cutting area at 90 degrees: rectangle 280 x 150 Belt speed 35/70 m/min Saw band length 2770 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t Dimensions LxWxH 1.5 x 1.2 x 1.3mweight approx.: 370 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,300 mm

Description: Manual cold circular saw with: - Machine base - Support rail - Quick release device Saw blade diameter 315 mm Cutting range at 90 degrees: around 100 mm Cutting area at 90 degrees: square 90 mm Speed 35 / 70 rpm Saw blade dimensions 315 mm Machine weight approx. 350 kg Space requirement approx. 800 x 800 x 1400 mmweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,400 mm

Description: Semi-automatic - pneumatic. Stretcher - Footswitch Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 2800 rpm Machine weight approx. 220 kg Dimensions L x W x H 700 x 600 x 1700mmApprox. Onsite Dimension. (l x w x h): 700 x 600 x 1,700 mm, weight approx.: 220 kg ... mais informação

Description: Cold circular saw with - Semi-automatic - Miter on both sides - Coolant system - hydr. Workpiece clamping Saw blade diameter 400 mm Cutting diameter 130 mm Cutting speed 30 - 130 m/min Total power requirement 1.5 / 2.6 kW Machine weight approx. 0.55 tApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 550 kg

Description: This grinder is ideal for regrinding tools such as End mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16' - 5/16' - 3/8' - 1/2' Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connection value 230 / 250 volts / watts Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 mweight approx.: 45 kg, Approx. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm