serras usadas para venda

Horizontal band saw / Müller HBS 230G /miter Cjkvx8b8yz with roller conveyor front/rear Cutting area - approx. 230mm Cutting area - square 230x230mm Cutting area - flat / portrait 250x230mm Cutting area - flat/flat 280x170mm At 45 degrees miter approx. 175mm At 45 degrees square 165x165mm at 45 degrees / flat / portrait 145x230mm At 45 degrees /flat 175x170mm at 60 degrees / miter round 170mm At 60 degrees /square 90x90mm At 60 degrees / tray / portrait 90x90mm At 60 degrees /flat 110x80mm Main engine / power 1,1 KW Speed range 30 - 60 m/min Band saw blade size 2700x27x0,9mm Dimensions: LxWxH 1400x800x1500mm Weight approx. 300Kg

heavy duty. Cutting capacity round/square 400 mm min. length 300 mm Max length a single / double feed 600/1200 mm  ... mais informação

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm  ... mais informação

White brand sawing machine mod. 360 CNC year 2010 revised in 2019  ... mais informação

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,  ... mais informação

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM  ... mais informação

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm  ... mais informação

Klaeger hacksaw 4B/400 workshop tool old Model: 4B/400 Machine no.: 81388 Year of construction: 1965  ... mais informação

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

With special equipment: • Roller conveyor 3m • Minimum quantity cooling •Conveyor • Hydraulic saw blade clamping • Laser cut line indicator • Clamping force regulation on the control panel • Hydraulic bundle clamping  ... mais informação

With optional equipment: • Hydraulic bundle clamping • Hydraulic saw blade clamping • Roller conveyor 3m • Minimum quantity cooling • Laser cut line indicator • Clamping force regulation on the control panel  ... mais informação

easily used, technically tested, without base frame Cutting capacity 0° (round) 225 mm Cutting capacity 0° (square) 180 mm Cutting capacity 0° (rectangle) (length x width) 150 mm x 245 mm Cutting capacity 45° L (square) 145 mm Cutting capacity 45° L (rectangle) (width x length) 145 mm x 190 mm Cutting capacity 45° L (round) 145 mm Cutting capacity 45° R (square) 120 mm Cutting capacity 45° R (round) 120 mm Cutting capacity 45° R (rectangle) (length x width) 120 mm x 120 mm Cutting capacity 60° R (round) 90 mm Cutting capacity 60° R (square) 90 mm Cutting capacity 60° R (rectangle) (length x width) 90 mm x 115 mm Cutting speeds 45 / 90 m/min

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides  ... mais informação

- technically efficient, ready to work – after full service - disc diameter: 350 mm  ... mais informação

Cutting range round: 320 mm Cutting area square: 300 x 320 mm Saw blade dimensions: 575 x 50 x 2.5 mm Lifting speeds: 16 - 45 m/min Drive motor: 380 V, approx. 6 kW Space requirements: 1600 x 1580 x 1470 mm Weight: 1220 kg  ... mais informação

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request  ... mais informação

Metal band saw machine in good condition YOC 2009 Ready for immediate use at call The HBA 500 S i has a stable 2-column construction and is characterized by the best cutting performance and simple and clear control. The highest level of precision and safety is guaranteed. Thanks to the extensive range of accessories, these models can be upgraded to a machine for highly demanding automatic saws. Working range, cutting quality and performance make the HBA 500 S a top model. Standard accessories: Control DP 100 with 7" touch screen, carbide guides, motor-driven chip brush, hydraulic cutting pressure adjustment, reinforced saw frame, 34 mm band saw technology, coolant system, integrated roller conveyor 1200 mm Saw blade dimensions 4400 x 34 x 1.1 mm Weight: 2400 kg Dimensions LxWxH2200x2400x2100 mm Working height 650 mm Cutting speed15-105m/min Infinitely variable f ...

Reliable hacksaw in good condition, immediately available. Kasto EBS 400 Cutting diameter 560 mm Saw blade length 850 mm Stroke 450 mm Total power requirement 6 kW Machine weight approx. 1.2 t The machine can be viewed at any time. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844